REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4496
This change adds the implementation that fits the needs and description
of PI spec defined Delayed Dispatch PPI in Pei Core.
The PPI would allow minimal delay for registered callbacks. As well as
allowing other functions to wait for GUIDed delayed dispatch callbacks.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Co-authored-by: Mike Turner <mikeyt@pobox.com>
Co-authored-by: Sachin Ganesh <sachinganesh@ami.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
The MM communicate buffer facilitates data sharing between non-MM
and MM code.
The MM IPL code allocates a "fixed" runtime type memory as the MM
communication buffer, and communicates its address and size to MM
Core via MmCommBuffer GUIDed HOB.
Here, "fixed" implies that the buffer's location remains constant
throughout the boot process.
Data is exchanged between the MM Communication PPI/Protocol and a
software MMI handler using this fixed MM communication buffer.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Co-authored-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Co-authored-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4750
Migrate the FV that doesn't contain the currently executing PEI Core
when permanent memory is initialized but PEI Core is still potentially
running from faster memory (Tepmorary RAM). This may reduce the time
required to migrate FVs to permanent memory. The FV containing PEI
Core is migrated after the PEI Core reentry when it is executed from
permanent memory.
This may or may not improve performance depending on the behavior of
temporary RAM and the actual performance changes must be measured with
the feature enabled and disabled.
This migration algorithm is only used for FVs specified in the
gEdkiiMigrationInfoGuid HOB and built with flag
FLAGS_FV_MIGRATE_BEFORE_PEI_CORE_REENTRY.
Signed-off-by: Awiral Shrivastava <awiral.shrivastava@intel.com>
Fire an event if a long delay occurs when starting an NVMe device.
This can be used by platforms to draw pictures on the screen or
take other actions to notify a user or move boot forward.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4716
Migrate FSP-T/M binary from temporary RAM to permanent RAM before NEM
tear down. Tcg module will use permanent address of FSP-T/M for
measurement. In MdeModulePkg, PeiCore installs mMigrateTempRamPpi if
PcdMigrateTemporaryRamFirmwareVolumes is True before NEM tear down and
after permanent memory ready.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Duggapu Chinni B <chinni.b.duggapu@intel.com>
Cc: Chen Gang C <gang.c.chen@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
This commit defines VARIABLE_RUNTIME_CACHE_INFO HOB.
The HOB is used to store the address and size of the
buffer that will be used for variable runtime service
when the PcdEnableVariableRuntimeCache is TRUE.
In following patches, when PcdEnableVariableRuntimeCache
is TRUE, VariablePei module will install a callback of
gEfiPeiMemoryDiscoveredPpiGuid to allocate needed buffer
for different type cache, unblock the buffer and build HOB.
Then VariableSmmRuntimeDxe driver will consume the
gEdkiiVariableRuntimeCacheInfoHobGuid to initialize the
variable runtime cache related content.
Signed-off-by: Dun Tan <dun.tan@intel.com>
This MpService2Ppi field in SMM_S3_RESUME_STATE is used to
wakeup AP to do the CPU initialization during smm s3 boot when
the execution mode of PEI and DXE are the same.
Currently, in CpuS3.c of smm cpu driver, BSP doesn't need to
wakeup AP anymore. The initialization for AP will be done in
S3Resume.c before transfer to CpuS3.c of smm cpu driver.
So we can remove the MpService2Ppi field in SMM_S3_RESUME_STATE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Provide an optional method for PEI to declare a specific address
range to use for the Memory Type Information bins. The current
algorithm uses heuristics that tends to place the Memory Type
Information bins in the same location, but memory configuration
changes across boots or algorithm changes across a firmware
updates could potentially change the Memory Type Information bin
location. If the bin locations move across an S4 save/resume
cycle, then the S4 resume may fail. Enabling this feature
increases the number of scenarios that an S4 resume operation
may succeed.
If the HOB List contains a Resource Descriptor HOB that
describes tested system memory and has an Owner GUID of
gEfiMemoryTypeInformationGuid, then use the address range
described by the Resource Descriptor HOB as the preferred
location of the Memory Type Information bins. If this HOB is
not detected, then the current behavior is preserved.
The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is ignored for the following conditions:
* The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is smaller than the Memory Type Information bins.
* The HOB list contains more than one Resource Descriptor HOB
with an owner GUID of gEfiMemoryTypeInformationGuid.
* The Resource Descriptor HOB with an Owner GUID of
gEfiMemoryTypeInformationGuid is the same Resource Descriptor
HOB that that describes the PHIT memory range.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4533
There are use cases which not all FVs need be migrated from TempRam to
permanent memory before TempRam tears down. This new guid is introduced
to avoid unnecessary FV migration to improve boot performance. Platform
can publish MigrationInfo hob with this guid to customize FV migration
info, and PeiCore will only migrate FVs indicated by this Hob info.
This is a backwards compatible change, PeiCore will check MigrationInfo
hob before migration. If MigrationInfo hobs exists, only migrate FVs
recorded by hobs. If MigrationInfo hobs not exists, migrate all FVs to
permanent memory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Cheng Sun <chengx.sun@intel.com>
Introduces two new APIs to EDKII_VARIABLE_POLICY_PROTOCOL:
1. GetVariablePolicyInfo()
2. GetLockOnVariableStateVariablePolicyInfo()
These allow a caller to retrieve policy information associated with
a UEFI variable given the variable name and vendor GUID.
GetVariablePolicyInfo() - Returns the variable policy applied to the
UEFI variable. If the variable policy is applied toward an individual
UEFI variable, that name can optionally be returned.
GetLockOnVariableStateVariablePolicyInfo() - Returns the Lock on
Variable State policy applied to the UEFI variable. If the Lock on
Variable State policy is applied to a specific variable name, that
name can optionally be returned.
These functions can be useful for a variety of purposes such as
auditing, testing, and functional flows.
Also fixed some variable name typos in code touched by the changes.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Message-Id: <20231030203112.736-2-mikuback@linux.microsoft.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4441
The EFI_RNG_PROTOCOL can rely on the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
a GetRngGuid() function is added in a following patch.
Prepare GetRngGuid() return values and add a gEdkiiRngAlgorithmUnSafe
to describe an unsafe implementation, cf. the BaseRngLibTimerLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
Add MpService2Ppi field in SMM_S3_RESUME_STATE of
AcpiS3Context.h. It will be used to wakeup AP to do the CPU
initialization during smm s3 boot flow in following patches.
With this field, we can avoid sending InitSipiSipi to wakeup
AP.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library provides API to dump Trace Hub message.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3986
The EFI_STATUS_CODE_DATA_MAX_SIZE is defined as 200 in MdeModulePkg.
After reducing 96byte buffer for variable parameters it is limited to
only 104 char debug string. This is a non-necessary limitation.
This change sets EFI_STATUS_CODE_DATA_MAX_SIZE to 0x200, and moves
MAX_EXTENDED_DATA_SIZE definition to the same header file with value
of EFI_STATUS_CODE_DATA_MAX_SIZE + sizeof (EFI_STATUS_CODE_DATA)
which is used in ReportStatusCodeLib to support longer debug string.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Cosmo Lai <cosmo.lai@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new GUID that is used to identify a HOB that passes variable
flash information to UEFI variable drivers in HOB consumption phases
such as DXE, Traditional MM, and Standalone MM.
This information was previously passed directly with PCDs such
as EfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
and gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize.
However, the Standalone MM variable driver instance does not have
direct access to the PCD database. Therefore, this HOB will first
be considered as the source for variable flash information and
if platforms do not produce the HOB, reading the information from
the PCDs directly will be a backup to provide backward
compatibility.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdeModulePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The legacy codebase allowed SMM images to be registered for profiling
from DXE. Support for this has been dropped entirely, so remove the
remaining handlers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
This variable is needed to track the change to
BootDiscoveryPolicy variable. Boot options should
be refreshed only if BootDiscoveryPolicy has been
changed.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
This library extends Boot Maintenance Menu and allows to select
Boot Discovery Policy. When choice is made BootDiscoveryPolicy
variable is set. Platform code can use this variable to decide
which class of device shall be connected.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2522
VariablePolicy is an updated interface to
replace VarLock and VarCheckProtocol.
This is an instance of a VarCheckLib that is backed by the
VariablePolicyLib business logic. It also publishes the SMM
calling interface for messages from the DXE protocol.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Signed-off-by: Bret Barkelew <brbarkel@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
When we allocate pool to save the rebased PEIMs, the address will change
randomly, therefore the hash will change and result PCR0 change as well.
To avoid this, we save the raw PEIMs and use it to calculate hash.
The MigratedFvInfo HOB will never produce when
PcdMigrateTemporaryRamFirmwareVolumes is FALSE, because the PCD control
the total feature.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Switch to the new MM communicate 2 protocol which supports both
traditional and standalone MM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
This change reduces SMIs for GetVariable () by maintaining a
UEFI variable cache in Runtime DXE in addition to the pre-
existing cache in SMRAM. When the Runtime Service GetVariable()
is invoked, a Runtime DXE cache is used instead of triggering an
SMI to VariableSmm. This can improve overall system performance
by servicing variable read requests without rendezvousing all
cores into SMM.
The runtime cache can be disabled with by setting the FeaturePCD
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE. If the PCD is set to FALSE, the runtime cache will not be
used and an SMI will be triggered for Runtime Service
GetVariable () and GetNextVariableName () invocations.
The following are important points regarding the behavior of the
variable drivers when the variable runtime cache is enabled.
1. All of the non-volatile storage contents are loaded into the
cache upon driver load. This one time load operation from storage
is preferred as opposed to building the cache on demand. An on-
demand cache would require a fallback SMI to load data into the
cache as variables are requested.
2. SetVariable () requests will continue to always trigger an SMI.
This occurs regardless of whether the variable is volatile or
non-volatile.
3. Both volatile and non-volatile variables are cached in a runtime
buffer. As is the case in the current EDK II variable driver, they
continue to be cached in separate buffers.
4. The cache in Runtime DXE and SMM are intended to be exact copies
of one another. All SMM variable accesses only return data from the
SMM cache. The runtime caches are only updated after the variable I/O
operation is successful in SMM. The runtime caches are only updated
from SMM.
5. Synchronization mechanisms are in place to ensure the runtime cache
content integrity with the SMM cache. These may result in updates to
runtime cache that are the same in content but different in offset and
size from updates to the SMM cache.
When using SMM variables with runtime cache enabled, two caches will now
be present.
1. "Runtime Cache" - Maintained in VariableSmmRuntimeDxe. Used to service
Runtime Services GetVariable () and GetNextVariableName () callers.
2. "SMM Cache" - Maintained in VariableSmm to service SMM GetVariable ()
and GetNextVariableName () callers.
a. This cache is retained so SMM modules do not operate on data outside
SMRAM.
Because a race condition can occur if an SMI occurs during the execution
of runtime code reading from the runtime cache, a runtime cache read lock
is introduced that explicitly moves pending updates from SMM to the runtime
cache if an SMM update occurs while the runtime cache is locked. Note that
it is not expected a Runtime services call will interrupt SMM processing
since all CPU cores rendezvous in SMM.
It is possible to view UEFI variable read and write statistics by setting
the gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics FeaturePcd
to TRUE and using the VariableInfo UEFI application in MdeModulePkg to dump
variable statistics to the console. By doing so, a user can view the number
of GetVariable () hits from the Runtime DXE variable driver (Runtime Cache
hits) and the SMM variable driver (SMM Cache hits). SMM Cache hits for
GetVariable () will occur when SMM modules invoke GetVariable ().
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2186
A common terminal console software Putty support various types of
keyboard type, such as normal mode, Linux mode, Xterm R6, Vt400,
VT100+ and SCO. Refer to the link:
https://www.ssh.com/ssh/putty/putty-manuals/0.68/Chapter4.html#config-funkeys
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SERIAL_DXE_FILE_GUID is used in different places, create a single
define that other can use. Also fix SerialDxe to actually use
EDKII_SERIAL_PORT_LIB_VENDOR_GUID in the device path instead of the
FILE_GUID.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-2-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1722
Since we have merged this one into MdePkg,
remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
We will remove IntelFrameworkModulePkg,
but BaseUefiTianoCustomDecompressLib may still need
to be used. So move BaseUefiTianoCustomDecompressLib
from IntelFrameworkModulePkg to MdeModulePkg.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.
The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.
The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).
The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.
The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It is caused by change d1102dba72.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the definitions of performance identifier since they
have been added into PerformanceLib.h.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove PCD_TYPE_SKU_ENABLED in PCD_TYPE_ALL_SET.
This change was missing at e8d2a98052.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and
before S3 boot script is executed, this GUID is installed as PPI in
PEI and protocol in SMM environment. It allows for PEIMs or SMM
drivers to hook this point and do the required tasks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Remove the definitions related to old perf codes.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Add two PCDs and new PCD DB format definition
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID
may be used to install PPI in future to notify PEI phase code.
The references in UefiCpuPkg are also being updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Kun Qin
Hongbin1 Zhang
Awiral Shrivastava
Sean Brogan
Zhihao Li
Dun Tan
Michael D Kinney
Cheng Sun
Michael Kubacki
Pierre Gondois
Gua Guo
Cosmo Lai
Marvin H?user
Grzegorz Bernacki
Bret Barkelew
Guomin Jiang
Ard Biesheuvel
Michael Kubacki
Liming Gao
Zhichao Gao
Anthony PERARD
Dandan Bi
Hao Wu
Chen A Chen
Eric Dong
Star Zeng
Zhang, Chao B