Change the code to listen EFI_SW_DXE_BS_PC_LEGACY_BOOT_EVENT instead of the Legacy Boot event to provide more precise performance data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17377 6f19259b-4bc3-4df7-8a09-765794883524
Boot mode maybe changed at any point during the PEI phase, therefore, boot
mode should be checked later rather at entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17323 6f19259b-4bc3-4df7-8a09-765794883524
to handle the case PE file alignment is not same as PE section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17063 6f19259b-4bc3-4df7-8a09-765794883524
As the drivers and library do not reference gEfiSmmAccess2ProtocolGuid explicitly now
after SmmMemLib introduced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16760 6f19259b-4bc3-4df7-8a09-765794883524
The code in AcpiTableDxe handles the installation of FADT and FACS in both
possible orders. In the [FADT, FACS] installation order, the FACS is at
once linked into the FADT. In the [FACS, FADT] installation order, the
FACS is stashed temporarily, and it is linked into the FADT when the FADT
is installed later.
According to the ACPI specification, *at most one* of FADT.FirmwareCtrl
and FADT.XFirmwareCtrl may be nonzero. The code is aware of this
requirement, and it never sets both of them to nonzero values at once.
However, the code doesn't expect the following:
- The caller first installs the FACS, which is stashed. The address that
is saved happens to fall below 4GB.
- The caller then installs a FADT, with a zero FirmwareCtrl field, and a
nonzero (pre-populated) XFirmwareCtrl field.
In this case the code sets FADT.FirmwareCtrl to the less-than-4GB address
of the stashed FACS, and leaves the different nonzero value in
FADT.XFirmwareCtrl. This violates the ACPI specification.
Prevent this by always zeroing the field that we do *not* set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16659 6f19259b-4bc3-4df7-8a09-765794883524
DXE FpdtStatusCodeHandler is required to be unregistered even if StatusCodeReport is disabled. This change makes sure FpdtStatusCodeHandler be always unregistered.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Vincent Zimmer <vincent.zimmer@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16470 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
2. DxeMain will get Vector Handoff Table GUIDed HOB to install configuration table if it has.
3. Updated CPU Exception Handler Library to provide 3 new APIs to replace original one API and updated NULL instance accordingly.
4. Updated DxeMain/CapsuleX64/BootSriptExectorDxe to use the new API in CPU Exception Handler Lib.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14884 6f19259b-4bc3-4df7-8a09-765794883524
2. Add check to ensure CommBufferPayloadSize not exceed mVariableBufferPayloadSize or is enough to hold function structure in VariableSmm and FtwSmm.
3. Align FtwGetLastWrite() in FaultTolerantWriteSmmDxe.c to FtwGetLastWrite() in FaultTolerantWrite.c.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14325 6f19259b-4bc3-4df7-8a09-765794883524
2. Refine the debug message.
3. Add check to make sure the input VariableName is A Null-terminated string.
4. Use local variable to hold StrSize (VariableName) to avoid duplicated StrSize calculation.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14317 6f19259b-4bc3-4df7-8a09-765794883524
ACPI4.0/5.0 have clear description:
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
Signed-off-by: jiewen.yao@intel.com
Reviewed-by: star.zeng@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13981 6f19259b-4bc3-4df7-8a09-765794883524
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
Signed-off-by: jiewen.yao@intel.com
Reviewed-by: star.zeng@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13980 6f19259b-4bc3-4df7-8a09-765794883524
2. Update Capsule modules to consume debug agent library to support source debugging in x64 code.
3. Update BootScriptExecutorDxe module to support source debugging on S3 path.
signed-off-by: Jeff Fan <jeff.fan@intel.com>
reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13680 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13292 6f19259b-4bc3-4df7-8a09-765794883524
Liming Gao
Hao Wu
Star Zeng
Yao, Jiewen
Laszlo Ersek
Feng Tian
Eric Dong
Chen Fan
Jeff Fan
Shumin Qiu
Chao Zhang
lgao4
lzeng14
erictian
jyao1
li-elvin
vanjeff
czhang46