Commit Graph

12 Commits

Author SHA1 Message Date
oliviermartin 2dbcb8f0a3 ArmPlatformPkg: Changed memory model for the stacks
In the previous version, every cores had the same stack size.
To avoid to waste memory with secondary core stacks, the primary core stack
size is now different from the secondary cores stack size.

These are the Stack PCDs and their default values:

gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecPrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecSecondaryStackSize|0x1000

gArmPlatformTokenSpaceGuid.PcdCPUCoresSecMonStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecMonStackSize|0x1000

gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x1000




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12415 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-22 23:05:20 +00:00
oliviermartin 0787bc6184 ArmPlatformPkg: Introduce Primary core macros
On MpCore system, the primary core can now be any core of the system.

To identify the primary core, you can use 'gArmTokenSpaceGuid.PcdArmPrimaryCoreMask'
and 'gArmTokenSpaceGuid.PcdArmPrimaryCore'.
These PCDs by default use the ClusterId and CoreId to identify the core. And the
primary core is defined as the ClusetrId=0 and CoreId=0.

The helper macros are: IS_PRIMARY_CORE(MpId), GET_CORE_ID(MpId), GET_CLUSTER_ID(MpId),
GET_CORE_POS(MpId), PRIMARY_CORE_ID.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12412 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-22 23:01:13 +00:00
oliviermartin 55a0d64b88 ArmPkg: Renamed library 'PL390GicLib' into 'ArmGicLib'
This library is the interface for the ARM Generic Interrupt Controller
Architecture Specification.
ARM Platform can use any GIC controller (not necessary PL390 GIC).




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-22 22:59:52 +00:00
oliviermartin 11c20f4e06 Arm Packages: Fixed coding style/Line endings to follow EDK2 coding convention
Arm Packages: Fixed mispelling

Arm Packages: Reduced warnings all over the code




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12407 6f19259b-4bc3-4df7-8a09-765794883524
2011-09-22 22:53:54 +00:00
oliviermartin 3757392733 ArmPlatformPkg/PrePi: Removed harcoded HobList pointer calculation to use PrePeiHobListPointerLib function
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12166 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-18 11:17:09 +00:00
oliviermartin 11e667fbab ArmPlatformPkg/PrePi: Removed second initialization of DebugAgenLib
This second initialization does not make sense in this context.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12164 6f19259b-4bc3-4df7-8a09-765794883524
2011-08-18 10:17:59 +00:00
oliviermartin 2ee8536623 ArmPlatformPkg: Fix warnings
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12001 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-07 10:52:07 +00:00
oliviermartin d269095b71 ArmPlatformPkg: Change the memory model for the ARM Platform components
In the former memory model, the UEFI firmware was expected to be located
at the top of the system memory. Stacks & Pi memory regions were set below
the firmware.
On some platform, the UEFI firmware could be shadowed by the ROM firmware
(case of the BeagleBoard) and in some cases the firmware is copied at the
beginning of the system memory.

With this new memory model, stack and Pi/DXE memory regions are set at the
top of the system memory wherever the UEFI firmware is located in the memory
map.
Because DXE core does not support shadowed firmwares, the system memory covered
by the UEFI firmware is marked as 'Non Present' to avoid to be overlapped by
DXE allocations.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11992 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-06 16:27:21 +00:00
oliviermartin a6caee65ac ArmPlatformPkg: Remove PcdStandalone from Sec module and Introduce ArmPlatformSecExtraAction()
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).

By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.

ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).


ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore


ArmPlatformPkg: Fix line endings in some source files

Use CR+LF line endings as defined by the EDK2 coding convention




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-06 16:07:54 +00:00
oliviermartin fb42fffeb8 ArmPlatformPkg: Fix build issues
Other compiler version ... other warnings



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11970 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-04 10:18:18 +00:00
oliviermartin 5cc45b70c3 ArmPkg: Move ARM Platform drivers from ArmPkg/Drivers/ to ArmPlatformPkg/Drivers/
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).


ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h

- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-01 15:30:01 +00:00
oliviermartin cd872e401a ArmPlatformPkg/PrePi: Add support for PrePi module
This module should handle the Pre PI phase before the DXE core is
executed when there is no PEI Core support.
It declares the required information needed by the DXE core through HOBs.



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11949 6f19259b-4bc3-4df7-8a09-765794883524
2011-07-01 11:09:00 +00:00