PlatformPeiLib produces the EarlyPL011BaseAddress GUID HOB, and
FdtPL011SerialPortLib consumes it. Extend the HOB such that it also carry
the base address of the PL011 UART meant for DebugLib usage -- namely the
first UART that is *not* designated by the /chosen node's "stdout-path"
property. Implement this policy in PlatformPeiLib.
Note that as far as the SerialPortLib+console UART is concerned, this
patch makes no difference. That selection remains consistent with the
pre-patch state, and therefore consistent with EarlyFdtPL011SerialPortLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-6-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
Convert both EarlyFdtPL011SerialPortLib and PlatformPeiLib at the same
time to clients of FdtSerialPortAddressLib (so that both "early" and
"late" serial output continue going to a common serial port). If the
device tree specifies just one serial port, this conversion makes no
difference, but if there are multiple ports, the output is written to the
port identified by /chosen "stdout-path".
In this patch, DebugLib output is not separated yet from the UEFI console.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
I strongly dislike when *small* local variable declaration changes are
muddled by whitespace changes. When that happens, a reviewer can choose
from two suboptimal options: display the patch with "git show -b", which
creates confusion in *other* parts of the patch, or display the patch with
just "git show", which then produces an unjustifiedly large hunk for the
sequence of declarations.
For avoiding that in subsequent patches, adjust some whitespace in this
patch in isolation. Functionally this is a no-op; "git show -b" produces
empty output.
Note that uncrustify is (of course) unhappy with this patch, but that's
fine -- this patch is in the middle of a series, and by the end of the
series (which is where uncrustify is run in CI) the whitespace is going to
be tight.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231008153912.175941-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4577
[lersek@redhat.com: add TianoCore BZ reference]
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
ArmVirtPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmVirtPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain DT nodes whose status is set to 'secure'. Similarly, the
status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Laszlo Ersek
Rebecca Cran
Michael Kubacki
Michael D Kinney
Ard Biesheuvel
Olivier Martin