When performing a tftp download from a server which does not support
rfc2349 transfer size option (such as netkit-tftpd), the existing code
falls back to allocating an 8MB buffer. Since this is insufficient for
an uncompressed AArch64 Linux kernel image, double the size to 16MB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ashutosh Singh <ashutosh.singh@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18748 6f19259b-4bc3-4df7-8a09-765794883524
The TFTP Device Path might contain a list of File Path device
path nodes.
ConvertDevicePathToText() allows to concatenate these File Path
nodes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17539 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_FIRMWARE_VOLUME2_PROTOCOL::EFI_FV_READ_SECTION prototype
takes a pointer to a pointer to an output buffer, so we should
not dereference Image (which is a pointer to pointer type itself)
but pass its value directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17357 6f19259b-4bc3-4df7-8a09-765794883524
Some boot entries might not have a EFI Device Path FilePath
attached to it (eg: EFI device Path for removable device path).
This patch allows a support loader to edit the EFI Device Path
and for instance add \EFI\BOOT\BOOT(ARM|AA64).EFI
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16930 6f19259b-4bc3-4df7-8a09-765794883524
When loading an image from a file, close the file after reading from it.
Use OpenProtocol instead of HandleProtocol to retrieve the simple file
system protocol interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16586 6f19259b-4bc3-4df7-8a09-765794883524
Fix DHCP4 configuration as part of TFTP boot process to get the IP address of
the gateway and the subnet mask from the DHCP server.
Fix a memory leak when the download from the TFTP server fails as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16582 6f19259b-4bc3-4df7-8a09-765794883524
Rework the downloading of an image from a TFTP server to do not
depend on any "PXE specific" setting of the DHCP server.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16516 6f19259b-4bc3-4df7-8a09-765794883524
Some device paths were making BdsConnectDevicePath() hang.
To prevent these hangs we check if the handle returned by
gBS->LocateDevicePath() is the same after each iteration.
An example of a device path that hangs:
PciRoot(0x0)/Pci(0x1,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(...)
The connect controller function manages to find PciRoot()/Pci(0x1,0x0)
but the USB driver does not produce USB(0x0,0x0)/USB(0x3,0x0) and
returns EFI_SUCCESS on its initialization.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15835 6f19259b-4bc3-4df7-8a09-765794883524
In some case, the size of the downloaded TFTP image cannot be known.
An arbitrary larger buffer is allocated to receive the image.
We need to make sure when we free the buffer we free the size
of the allocated buffer and not the size of the actual image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15609 6f19259b-4bc3-4df7-8a09-765794883524
Some TFTP servers do not have 'tsize' extension.
This change allows to download files from TFTP servers that do not have
this extension by trying to download the file into a pre-allocated buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15539 6f19259b-4bc3-4df7-8a09-765794883524
Boot entries created by efibootmgr may contain a partial device path
to the EFI application to boot. These entries begin with a partition
device path whereas entries created via ARM Boot Manager contain a
full path to the EFI application. The ARM BDS code will fill in the
missing parts of this partial device path as it does for removeable
device paths. This allows the application to be loaded and started.
However, the current code passes the original partial device path to
gBS->LoadImage() and thus LoadImage is unable to find a DeviceHandle
for the path. This means the application being booted cannot find the
boot device from the Loaded Image Protocol structure. In the case of
grub, this prevents the grub config file from being found. This patch
fixes this by making sure the full path is propagated back to the
caller of gBS->LoadImage() so that a proper DeviceHandle gets passed
to the application being booted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15518 6f19259b-4bc3-4df7-8a09-765794883524
- An Ascii filename must be passed to the TFTP service (was a Unicode filename)
- If the PXE service had already configured the connection we need to restart
when we want to download a new file or do a do a PXE Boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14195 6f19259b-4bc3-4df7-8a09-765794883524
The previous version was only checking if the Remaining Device Path node
was a MemMap DevicePath node.
This fix also checks if the Root DevicePath node is a MemMap DevicePath node.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12315 6f19259b-4bc3-4df7-8a09-765794883524
The errors were:
- uncaught returned error
- used of uninitialized variables
ArmPlatformPkg/Bds: Implement the update of MemMap Boot Device
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11830 6f19259b-4bc3-4df7-8a09-765794883524
The previous version was using the string representation of the Device Path.
This new version takes as paramater the binary representation of the Device Path
It also tries to detect which kind of device support it refers by using the remaining
part of the Device Path after it has been loaded by gBS->ConnectController()
Lots of bug have been fixed as well in this new version.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11799 6f19259b-4bc3-4df7-8a09-765794883524
Heyi Guo
Ashutosh Singh
Olivier Martin
Ard Biesheuvel
Ronald Cron
Brendan Jackman
Mark Salter
oliviermartin
andrewfish