When gDS->SetMemorySpaceCapabilities() is called,
current DXE core will sync all GCD attributes to memory map
attributes, including RUNTIME attributes.
It is wrong, because RUNTIME attributes should be set for
runtime memory only.
This fix clears the RUNTIME attributes before convert to UEFI
memory map. So that the UEFI memory map is good after
gDS->SetMemorySpaceCapabilities() is called.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
TerminalDxe driver contains bugs in its DriverBindingStart():
1. It cannot be started AGAIN using a different terminal type;
2. It doesn't install SimpleTextInput/SimpleTextOut when
ConIn/ConOut doesn't contain its device path. The check is
duplicated of the same logic in ConPlatform driver and can
be removed.
The patch optimized the code to remove the unnecessary
gEfiCallerIdGuid protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If a BaseAddress of NULL is passed into DXE Core services
CoreAllocateIoSpace() or CoreAllocateMemorySpace(), and
DEBUG() messages are enabled, then a NULL pointer reference
is made. The parameter check for BaseAddress is performed
in the function CoreAllocateSpace() after the DEBUG()
messages. A check is added in the DEBUG() messages to
prevent the NULL pointer reference.
This issue was found with PI SCTs with DEBUG messages
enabled in the DXE Core.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When firmware boots to UiApp, the memory type information settings
are saved to NV storage and the settings in HOB are changed as well.
Because UiApp is an APPLICATION type of boot option, system doesn't
reset when settings change.
But when user selects OS to boot in UiApp, because the settings in HOB
was updated when booting to UiApp, the BDS doesn't think the settings
change, expected reset doesn't happen.
The patch fixes this issue to not update the settings in HOB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Ip4Config2SetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The BootScriptWriteMemPoll() helper function in both drivers does the
following:
- pop Delay from the variable argument list as UINT64, then truncate it to
UINTN,
- divide Delay by 10, using DivU64x32Remainder(), then store the quotient
in LoopTimes (also UINTN),
- pass LoopTimes to S3BootScriptSaveMemPoll() as last argument.
The truncation to UINTN is superfluous and wrong in this logic (not to
mention incompatible with the PI spec); it prevents callers from
specifying Delays longer than 0xFFFF_FFFF * 100ns (approximately 429
seconds == 7 minutes 9 seconds) on Ia32. In particular it prevents callers
from specifying an infinite timeout (for example, 0xFFFF_FFFF_FFFF_FFFF *
100ns, approximately 58494 years).
Change the type of Delay and LoopTimes to UINT64. Keep the same logic,
just remove the truncations. The resultant LoopTimes values can be safely
passed to S3BootScriptSaveMemPoll() thanks to the previous patch.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The BaseNull instance of S3BootScriptLib obviously doesn't care about the
type of the S3BootScriptSaveMemPoll() function's LoopTimes parameter; this
lib instance doesn't do anything with the parameters received in
S3BootScriptSaveMemPoll().
The PiDxe instance saves the LoopTimes parameter in
EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This target field already has UINT64
type. Furthermore, the BootScriptExecuteMemPoll() function in the same
library instance already uses a local UINT64 variable called LoopTimes to
count up to EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This means that the the
UINTN type for S3BootScriptSaveMemPoll()'s LoopTimes parameter is an
unnecessary restriction.
The callers of S3BootScriptSaveMemPoll() will be updated in the next
patches, functionally. At this stage, they will continue to compile, since
UINT64 parameters can accept UINTN arguments.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=307
For the following APIs in PrintLib instance
MdeModulePkg\Library\DxePrintLibPrint2Protocol:
UnicodeVSPrint
UnicodeSPrint
UnicodeVSPrintAsciiFormat
UnicodeSPrintAsciiFormat
AsciiVSPrint
AsciiSPrint
AsciiVSPrintUnicodeFormat
AsciiSPrintUnicodeFormat
The internal function DxePrintLibPrint2ProtocolVaListToBaseList() will be
called to convert a VA_LIST to a BASE_LIST. However, those APIs miss
checking the return value of the internal function.
This commit adds codes to check the return value. If the VA_LIST fails to
be converted to a BASE_LIST, those PrintLib APIs will return 0 and leave
the output 'StartOfBuffer' unmodified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Register key notify for toggle state (CapsLock, NumLock and ScrollLock)
sync between multiple keyboards.
The implementation for this feature requires keyboard driver supports
EFI_KEY_STATE_EXPOSED, and turns on physical TextInEx partial key
report for toggle state sync.
The virtual TextInEx will report the partial key after it is required
by calling SetState(X | KEY_STATE_VALID_EXPOSED) explicitly.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Previous logic does not follow UEFI 22.2.3 to process FMP strictly.
It may cause FMP image not be processed in some corner case.
The updated logic follows UEFI 22.2.3.
The way to check if a capsule is processed is also simplified.
The function - ProcessFmpCapsuleImage() is too big, so that
we created sub-functions - StartFmpImage(), DumpAllFmpInfo(),
GetFmpHandleBufferByType(), SetFmpImageData(), RecordFmpCapsuleStatus()
to improve the readability.
The function - ProcessTheseCapsules() is too big, so that
we created sub-functions - InitCapsulePtr(), AreAllImagesProcessed(),
PopulateCapsuleInConfigurationTable() to improve the readability.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule result variable may roll over to 0.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule report variable should include
a null terminator for capsule name and capsule target, if they are
not present.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule report variable should include
a null terminator for capsule name and capsule target, if they are
not present.
The reserved field is zeroed.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit refines the logic for the CvtNum function. It avoids using the
decrement operator '--' for array index to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This commit rewrites the logic for NetblockChecksum. It processes the
checksum of the left-over byte first to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
For variable name, it should contain lower case characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch remove the ASSERT when receive a DHCP packet large than the maximum
cache buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Add support for non-coherent DMA, either by performing explicit cache
maintenance when DMA mappings are aligned to the CPU's DMA buffer alignment,
or by bounce buffering via uncached mappings otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some Pcds are added to the dec file, but miss to add the
prompt&&help info to the uni file, now add them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fix switch/case statement type mismatch in functions PciIoMemRead &
PciIoMemWrite.
Parameter 'Width' is of enum type EFI_PCI_IO_PROTOCOL_WIDTH, but the enum
type provided in 'switch (Width)' block is of type
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PiSmmIpl records LoadModuleAtFixAddressSmramBase in LMFAConfigurationTable.
Update PiSmmCore to directly get the address from this system table.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Allocate the additional Smram range to describe the reserved smram for
SMM core and driver when LMFA feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=278
Zero memory address or zero number pages are invalid to SmmFreePages().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=290
Current SmmVariableGetStatistics() in VariableSmm.c is always
checking input InfoSize against the first variable info,
it is incorrect.
For instance, there are three variables.
BootOrder
Boot0000
Boot0001
If the input InfoEntry is holding the second variable info (Boot0000)
and InfoSize is sizeof (VARIABLE_INFO_ENTRY) + StrSize (L"Boot0000"),
current code will return EFI_BUFFER_TOO_SMALL, but it should return
the third variable info (Boot0001).
This patch is to refine the code logic.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Jiewen Yao
Ruiyu Ni
Michael Kinney
Dandan Bi
Jiaxin Wu
Laszlo Ersek
Hao Wu
Star Zeng
Fu Siyuan
Ard Biesheuvel
Liming Gao