Names of firmware configuration files always take 56 bytes (including at
least one terminating NUL byte). Expose this constant to all consumers of
QemuFwCfgLib because further interfaces may depend on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15571 6f19259b-4bc3-4df7-8a09-765794883524
Such a packaged query function will come in handy in the following
patches.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: check for enabled rather than disabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15292 6f19259b-4bc3-4df7-8a09-765794883524
This internal function allows separation of library-internal and
for-clients external availability of fw_cfg.
The interface contract of QemuFwCfgIsAvailable() is changed so that now it
may modify fw_cfg state. All current users are compliant with the new
contract.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15044 6f19259b-4bc3-4df7-8a09-765794883524
These functions did not provide much more than the new protocol functions
VIRTIO_DEVICE_PROTOCOL.ReadDevice() / VIRTIO_DEVICE_PROTOCOL.WriteDevice().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14968 6f19259b-4bc3-4df7-8a09-765794883524
This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
MMIO operation
- VirtioNetInitialize(): fix destination error label for when
SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
operation
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
Why is the virtio-mmio implementation of the protocol a library,
instead of a driver binary?
The UEFI driver model would encourage to create a virtio-mmio driver
instead of a library. But the reasons why I created a library are:
- A virtio-mmio driver would imply an additional protocol that would
probably have a single attribute field:
typedef struct {
PHYSICAL_ADDRESS BaseAddress;
} VIRTIO_MMIO_DEVICE_PROTOCOL;
- There is no (easy) way to scan the available VirtIo devices on a
platform. So, the UEFI firmware for this platform would need a driver
to produce instances for every virtio devices it wants to expose in
UEFI. A single call to a helper library (ie: VirtioMmioDeviceLib)
make the porting easier.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
v5:
- typo fix in VirtioMmioInstallDevice() comment block
- plug MmioDevice leak in VirtioMmioUninstallDevice()
- return EFI_INVALID_PARAMETER in VirtioMmioGetQueueAddress() if
QueueAddress is NULL
- VirtioMmioSetQueueSize(): fix return value (it's a status code)
- VirtioMmioSetPageSize(): check against EFI_PAGE_SIZE with "if" plus
EFI_UNSUPPORTED, rather than ASSERT()
- VirtioMmioDeviceWrite(), VirtioMmioDeviceRead(): remove redundant
(FieldSize > 8) checks
- VirtioMmioDeviceLib.inf: drop UefiDriverEntryPoint library dependency
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14965 6f19259b-4bc3-4df7-8a09-765794883524
The descriptor table (also known as "queue") consists of descriptors. (The
corresponding type in the code is VRING_DESC.)
An individual descriptor describes a contiguous buffer, to be transferred
uni-directionally between host and guest.
Several descriptors in the descriptor table can be linked into a
descriptor chain, specifying a bi-directional scatter-gather transfer
between host and guest. Such a descriptor chain is also known as "virtio
request".
(The descriptor table can host sereval descriptor chains (in-flight virtio
requests) in parallel, but the OVMF driver supports at most one chain, at
any point in time.)
The first descriptor in any descriptor chain is called "head descriptor".
In order to submit a number of parallel requests (= a set of independent
descriptor chains) from the guest to the host, the guest must put *only*
the head descriptor of each separate chain onto the Available Ring.
VirtioLib currently places the head of its one descriptor chain onto the
Available Ring repeatedly, once for each single (head *or* dependent)
descriptor in said descriptor chain. If the descriptor chain comprises N
descriptors, this error amounts to submitting the same entire chain N
times in parallel.
Available Ring Descriptor table
Ptr to head ----> Desc#0 (head of chain)
Ptr to head --/ Desc#1 (next in same chain)
... / ...
Ptr to head / Desc#(N-1) (last in same chain)
Anatomy of a single virtio-blk READ request (a descriptor chain with three
descriptors):
virtio-blk request header, prepared by guest:
VirtioAppendDesc PhysAddr=3FBC6050 Size=16 Flags=1 Head=1232 Next=1232
payload to be filled in by host:
VirtioAppendDesc PhysAddr=3B934C00 Size=32768 Flags=3 Head=1232 Next=1233
host status, to be filled in by host:
VirtioAppendDesc PhysAddr=3FBC604F Size=1 Flags=2 Head=1232 Next=1234
Processing on the host side -- the descriptor chain is processed three
times in parallel (its head is available to virtqueue_pop() thrice); the
same chain is submitted/collected separately to/from AIO three times:
virtio_queue_notify vdev VDEV vq VQ#0
virtqueue_pop vq VQ#0 elem EL#0 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#0
virtqueue_pop vq VQ#0 elem EL#1 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#1
virtqueue_pop vq VQ#0 elem EL#2 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#2
virtio_blk_rw_complete req REQ#0 ret 0
virtio_blk_req_complete req REQ#0 status 0
virtio_blk_rw_complete req REQ#1 ret 0
virtio_blk_req_complete req REQ#1 status 0
virtio_blk_rw_complete req REQ#2 ret 0
virtio_blk_req_complete req REQ#2 status 0
On my Thinkpad T510 laptop with RHEL-6 as host, this probably leads to
simultaneous DMA transfers targeting the same RAM area. Even though the
source of each transfer is identical, the data is corrupted in the
destination buffer -- the CRC32 calculated over the buffer varies, even
though the origin of the transfers is the same, never rewritten LBA.
SynchronousRequest Lba=585792 BufSiz=32768 ReqIsWrite=0 Crc32=BF68A44D
The problem is invisible on my HP Z400 workstation.
Fix the request submission by:
- building the only one descriptor chain supported by VirtioLib always at
the beginning of the descriptor table,
- ensuring the head descriptor of this chain is put on the Available Ring
only once,
- requesting the virtio spec's language to be cleaned up
<http://lists.linuxfoundation.org/pipermail/virtualization/2013-April/024032.html>.
Available Ring Descriptor table
Ptr to head ----> Desc#0 (head of chain)
Desc#1 (next in same chain)
...
Desc#(N-1) (last in same chain)
VirtioAppendDesc PhysAddr=3FBC6040 Size=16 Flags=1 Head=0 Next=0
VirtioAppendDesc PhysAddr=3B934C00 Size=32768 Flags=3 Head=0 Next=1
VirtioAppendDesc PhysAddr=3FBC603F Size=1 Flags=2 Head=0 Next=2
virtio_queue_notify vdev VDEV vq VQ#0
virtqueue_pop vq VQ#0 elem EL#0 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#0
virtio_blk_rw_complete req REQ#0 ret 0
virtio_blk_req_complete req REQ#0 status 0
SynchronousRequest Lba=585792 BufSiz=32768 ReqIsWrite=0 Crc32=1EEB2B07
(The Crc32 was double-checked with edk2's and Linux's guest IDE driver.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14356 6f19259b-4bc3-4df7-8a09-765794883524
We're supposed to zero everything in the kernel bootparams that we don't
explicitly initialise, other than the setup_header from 0x1f1 onwards
for a precisely defined length, which is copied from the bzImage.
We're *not* supposed to just pass the garbage that we happened to find
in the bzImage file surrounding the setup_header.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14052 6f19259b-4bc3-4df7-8a09-765794883524
AppendDesc() should have a prefix implying its containing library,
VirtioLib. Update its sole client VirtioBlkDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13843 6f19259b-4bc3-4df7-8a09-765794883524
Introduce a new library called VirtioLib, for now only collecting the
following reusable functions with as little changes as possible:
- VirtioWrite()
- VirtioRead()
- VirtioRingInit()
- VirtioRingUninit()
- AppendDesc()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13842 6f19259b-4bc3-4df7-8a09-765794883524
Tested with the "bootorder" fw_cfg file. Example contents (leading space
added and line terminators transcribed for readability):
/pci@i0cf8/ide@1,1/drive@0/disk@0<LF>
/pci@i0cf8/ide@1,1/drive@1/disk@0<LF>
/pci@i0cf8/ethernet@3/ethernet-phy@0<NUL>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13549 6f19259b-4bc3-4df7-8a09-765794883524
This library provides an interface for converting the system
variables into a binary and also restoring the system variables
from that binary.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11284 6f19259b-4bc3-4df7-8a09-765794883524
Note:
* This only works before ExitBootServices
* For OVMF, variables are only preserved on the disk if there
is a hard disk connected which has a writeable FAT file system.
The Ovmf/Library/EmuVariableFvbLib library will look for the
gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent PCD to be set to
a non-zero value. If set, it is treated as an event handle, and
each write to the EmuVariableFvb will cause the event to be
signaled.
In this change, the OVMF platform BDS library sets up this event,
and sets the PCD so that after each write to the EMU Variable FVB,
the non-volatile variables will be saved out to the file system.
The end result is that NV variables that are written prior to the
ExitBootServices call should be preserved by storing them on the
disk.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9318 6f19259b-4bc3-4df7-8a09-765794883524
This library provides an interface where variables can be saved and restored
using a file in a file system accessible to the firmware. It is expected
that a platform BDS library will use this library. The platform BDS
implementation can decide which devices to connect and then to attempt to use
for saving and restoring NV variables.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9272 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Olivier Martin
jljusten
hhtian