PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
Among other things, the header file declares the functions that implement
the VIRTIO_DEVICE_PROTOCOL members over virtio-mmio. The functions are
defined in "VirtioMmioDeviceFunctions.c", and referenced in the
initialization of "mMmioDeviceProtocolTemplate", in "VirtioMmioDevice.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the CreateExtraRootBusMap(),
DestroyExtraRootBusMap(), and MapRootBusPosToBusNr() functions. They are
defined in "ExtraRootBusMap.c", and called from "QemuBootOrderLib.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, "DebugLibDetect.h" declares the
PlatformDebugLibIoPortFound() function. The function is called from
"DebugLib.c", which is included in both library instances. The function is
defined separately per library instance, in "DebugLibDetectRom.c" and
"DebugLibDetect.c", respectively.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares LoadNvVarsFromFs() and SaveNvVarsToFs(), which
are defined in "FsAccess.c" and called from "NvVarsFileLib.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InitLinuxDescriptorTables() and
SetLinuxDescriptorTables() functions, which are called from "Linux.c" and
implemented in "LinuxGdt.c".
The header file also declares the JumpToKernel() and JumpToUefiKernel()
functions, which are similarly called from "Linux.c". They are implemented
(dependent on architecture) in "Ia32/JumpToKernel.nasm" and
"X64/JumpToKernel.nasm".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the
InternalMemEncryptSevSetMemoryDecrypted() and
InternalMemEncryptSevSetMemoryEncrypted() functions. The functions are
called from "X64/MemEncryptSevLib.c", and defined in
"X64/VirtualMemory.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InternalAcpiGetTimerTick() function. The
function is called from "AcpiTimerLib.c", which is built into all three
library instances. The function is defined individually per library
instance, in "BaseRomAcpiTimerLib.c", "BaseAcpiTimerLib.c", and
"DxeAcpiTimerLib.c" (enumerated in increasing firmware phase order).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In edk2, the "static" keyword is spelled "STATIC". Also let "STATIC" stand
alone on a line in function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the library like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Commit 2ac1730bf2 (MdeModulePkg/DxeIpl: Mark page table as read-only)
sets the memory pages used for page table as read-only after paging is
setup and sets CR0.WP to protect CPU modifying the read-only pages.
The commit causes #PF when MemEncryptSevClearPageEncMask() or
MemEncryptSevSetPageEncMask() tries to change the page-table attributes.
This patch takes the similar approach as Commit 147fd35c3e
(UefiCpuPkg/CpuDxe: Enable protection for newly added page table).
When page table protection is enabled, we disable it temporarily before
changing the page table attributes.
This patch makes use of the same approach as Commit 2ac1730bf2
(MdeModulePkg/DxeIpl: Mark page table as read-only)) for allocating
page table memory from reserved memory pool, which helps to reduce a
potential "split" operation.
The patch duplicates code from commit 147fd35c3e. The code duplication
will be removed after we implement page table manipulation library. See
bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=847.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This means that SetBootOrderFromQemu() will preserve all UEFI boot options
matched by any given OFW devpath, such as PXEv4, HTTPv4, PXEv6 and HTTPv6
boot options for the same NIC. Currently we stop the matching / appending
for the OFW devpath coming from the outer loop whenever we find the first
UEFI boot option match in the inner loop.
(The previous patch was about multiple OFW devpaths matching a single UEFI
boot option (which should never happen). This patch is about a single OFW
devpath matching multiple UEFI boot options. With the "break" statement
removed here, the small optimization from the last patch becomes a bit
more relevant, because now the inner loop always counts up to
ActiveCount.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SetBootOrderFromQemu() function implements a nested loop where
- the outer loop iterates over all OpenFirmware (OFW) device paths in the
QEMU boot order, and translates each to a UEFI device path prefix;
- the inner loop matches the current (translated) prefix against all
active UEFI boot options in turn;
- if the UEFI boot option is matched by the translated prefix, the UEFI
boot option is appended to the "new" UEFI boot order, and marked as
"has been appended".
This patch adds a micro-optimization where already matched / appended UEFI
boot options are skipped in the inner loop. This is not a functional
change. A functional change would be if, as a consequence of the patch,
some UEFI boot options would no longer be *doubly* matched.
For a UEFI boot option to be matched by two translated prefixes, one of
those prefixes would have to be a (proper, or equal) prefix of the other
prefix. The PCI and MMIO OFW translation routines output such only in the
following cases:
- When the original OFW device paths are prefixes of each other. This is
not possible from the QEMU side. (Only leaf devices are bootable.)
- When the translation rules in the routines are incomplete, and don't
look at the OFW device paths for sufficient length (i.e., at nodes where
they would already differ, and the difference would show up in the
translation output).
This would be a shortcoming of the translation routines and should be
fixed in TranslatePciOfwNodes() and TranslateMmioOfwNodes(), whenever
identified.
Even in the second case, this patch would replace the double appending of
a single UEFI boot option (matched by two different OFW device paths) with
a correct, or cross-, matching of two different UEFI boot options. Again,
this is not expected, but arguably it would be more correct than duplicate
boot option appending, should it occur due to any (unexpected, unknown)
lack of detail in the translation routines.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When SEV is enabled, every debug message printed by OVMF to the
QEMU debug port traps from the guest to QEMU character by character
because "REP OUTSB" cannot be used by IoWriteFifo8. Furthermore,
when OVMF is built with the DEBUG_VERBOSE bit (value 0x00400000)
enabled in "gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel", then the
OvmfPkg/IoMmuDxe driver, and the OvmfPkg/Library/BaseMemEncryptSevLib
library instance that is built into it, produce a huge amount of
log messages. Therefore, in SEV guests, the boot time impact is huge
(about 45 seconds _additional_ time spent writing to the debug port).
While these messages are very useful for analyzing guest behavior,
most of the time the user won't be capturing the OVMF debug log.
In fact libvirt does not provide a method for configuring log capture;
users that wish to do this (or are instructed to do this) have to resort
to <qemu:arg>.
The debug console device provides a handy detection mechanism; when read,
it returns 0xE9 (which is very much unlike the 0xFF that is returned by
an unused port). Use it to skip the possibly expensive OUT instructions
when the debug I/O port isn't plugged anywhere.
For SEC, the debug port has to be read before each full message.
However:
- if the debug port is available, then reading one byte before writing
a full message isn't tragic, especially because SEC doesn't print many
messages
- if the debug port is not available, then reading one byte instead of
writing a full message is still a win.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The next patch will want to add a global variable to
PlatformDebugLibIoPort, but this is not suitable for the SEC
phase, because SEC runs from read-only flash. The solution is
to have two library instances, one for SEC and another
for all other firmware phases. This patch adds the "plumbing"
for the SEC library instance, separating the INF files and
moving the constructor to a separate C source file.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove Uefi.h, which includes UefiSpec.h, and change the
return value to match the RETURN_STATUS type.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
XenHypercallLib uses the 'hvc' instruction, which is not implemented
on all ARMv7 CPUs, and so we need to explicitly specify a CPU that
has the virtualization extensions.
This override used to be set at the platform level, but this was removed
in commit 0d36a219c7
('ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib
reference), under the assumption that all users of the 'hvc' instruction
had already been fixed.
So fix this for GNU binutils by adding the 'virt' arch extension
directive, and for RVCT by setting the --cpu command line option to a
CPU that is virt capable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The feature is primarily useful for modern AARCH64 guests that have no
built-in virtio block / SCSI drivers; as on "qemu-system-aarch64 -M virt",
there are no IDE or AHCI controllers that could be used as fallback. XHCI
is available in "-M virt" however, and because XHCI predates AARCH64 by
several years, said guests are expected to have built-in drivers for it.
Other device models ("usb-uas", "usb-bot") are out of scope for now,
similarly to USB1.x (UHCI) and USB2 (EHCI) host controllers, and similarly
to USB hubs (which are USB1.1 only). In particular, port mapping between
EHCI and companion UHCI controllers is very complex; it even leads to PCI
slot/function differences between the OpenFirmware device paths exported
by QEMU and the the UEFI device paths generated by edk2.
The number of ports on the XHCI controller defaults to 4, but it can be
raised via the "p3" property to 15. In addition, several XHCI controllers
can be grouped into a single-slot, multi-function PCI device. These allow
for a good number of usb-storage devices, while their desired boot order
remains recognizable to this patch.
In the example below, we create two XHCI controllers, grouped into PCI
slot 00:02 as functions 0 and 1. Both controllers are given 15 ports. We
attach a "usb-storage" device to controller 1 at port 3 (ports are 1-based
in QEMU, 0-based in edk2), and attach another "usb-storage" device to
controller 2 at port 9.
QEMU command line options (NB. they apply equally to aarch64/virt and
x86_64/{i440fx,q35}):
-device qemu-xhci,id=xhci1,p3=15,addr=02.0,multifunction=on \
-device qemu-xhci,id=xhci2,p3=15,addr=02.1 \
\
-drive id=disk1,if=none,format=qcow2,$DISK1_OPTIONS \
-drive id=disk2,if=none,format=qcow2,$DISK2_OPTIONS \
\
-device usb-storage,drive=disk1,bus=xhci1.0,port=3,bootindex=1 \
-device usb-storage,drive=disk2,bus=xhci2.0,port=9,bootindex=2 \
Libvirt domain XML fragment:
<controller type='usb' index='1' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x0'
multifunction='on'/>
</controller>
<controller type='usb' index='2' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
</controller>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sda' bus='usb'/>
<boot order='1'/>
<address type='usb' bus='1' port='3'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sdb' bus='usb'/>
<boot order='2'/>
<address type='usb' bus='2' port='9'/>
</disk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
"Boot Mode:%x" is an informative message, not an error report. Set its
debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Since commit 19c6d9feaa ("MdePkg: Expand BaseIoLibIntrinsic (IoLib
class) library", 2017-01-14), IoWriteFifo8() has been widely available to
modules. Use it to print debug messages and assertion failures to the QEMU
debug port, rather than open-coded loops.
In the general case this speeds up logging, because debug messages will
now trap to QEMU once per message (as opposed to once per character), due
to "REP OUTSB" in "MdePkg/Library/BaseIoLibIntrinsic/*/IoFifoSev.nasm".
In SEV guests, there is no speedup (SEV doesn't support the REP prefix).
SEV is detected internally to BaseIoLibIntrinsic.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Laszlo Ersek
Dandan Bi
Heyi Guo
Brijesh Singh
Paolo Bonzini
Ard Biesheuvel