It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
defined values of EFI_MTFTP6_ERRORCODE_ILLEGAL_OPERATION and
EFI_MTFTP6_ERRORCODE_FILE_ALREADY_EXISTS are the same. This patch
corrects the value of EFI_MTFTP6_ERRORCODE_ILLEGAL_OPERATION to 4.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Add UnicodeStrToAsciiStrS() and AsciiStrToUnicodeStrS() API.
These 2 safe version APIs are used to replace UnicodeStrToAsciiStr() and
AsciiStrToUnicodeStr() API.
The safe version string convert APIs use similar check as StrCpyS().
Cc: Liming Gao <Liming.Gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Liming Gao <Liming.Gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Adds a public header for NVMe v1.1 spec. definitions. The majority
of these definitions where copied from a private header in
MdeModulePkg/Bus/Pci/NvmExpress/NvmExpressHci.h. Additional
definitions were added e.g. the NVMe Smart Health Log and
Firmware Info. Log structures. These definitions should be
in a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Darbin Reyes <darbin.emm.reyes@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add more comments:
1) EDKII version safe string function is similar as the one C11.
2) If error is returned, the Destination is unmodified.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove PCD_MAX_SKU_ID definition,
the check to PCD_MAX_SKU_ID and the comments describes the limitation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In Previous PI spec (< PI1.4a) Volume 1, Section 7.4.1, the callback
EFI_PEIM_NOTIFY_ENTRY_POINT is defined. A description for the arguments
are provided but not for the EFI_STATUS return value.
PI1.4a updated EFI_PEIM_NOTIFY_ENTRY_POINT definition to include a new
paragraph with this sentence after the arguments:
"The status code returned from this function is ignored"
This patch is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous PI spec (< PI1.4a) has EFI_RESOURCE_ATTRIBUTE_PERSISTENT and
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE with same value 0x00800000.
To resolve the conflict, PI1.4a updated
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE to 0x00080000, this patch
is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to the SCSI Block Commands - 4 (SBC-4) spec, the patch add SCSI
unmap command support in IndustryStandard/Scsi.h.
The following changes have been made:
1. Add SCSI unmap command OP Code
2. Update the structure definition for Block Limits VPD page
3. Add structure definitions for UNMAP parameter list header & UNMAP block
descriptor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add HII definitions from UEFI 2.6 for HII Image Variability and PNG
Blocks
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The UEFI2.5 Errata (Mantis ticket 1472 -
https://mantis.uefi.org/mantis/view.php?id=1472) updated
'PortMultiplierPort' parameter description for the following services in
EFI_ATA_PASS_THRU_PROTOCOL:
1. PassThru
2. BuildDevicePath
3. ResetDevice
Now, if there is no port multiplier on a ATA controller port, the
PortMultiplierPort parameter should be set to 0xFFFF instead of 0.
Please note that this is an incompatible semantic change. The consumer of
EFI_ATA_PASS_THRU_PROTOCOL needs to re-examine its usage to follow UEFI
2.5 Errata mantis 1472.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The UEFI2.5 spec (Mantis ticket 1353 -
https://mantis.uefi.org/mantis/view.php?id=1353) updated the Port
Multiplier Port Number description of SATA device path to use 0xFFFF when
the device is directly connected to the HBA.
Please note that this is an incompatible semantic change. The consumer of
SATA device path needs to re-examine its usage to follow UEFI 2.5 mantis
1353.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Revert AuditMode/DeployedMode definition from Customized Secure Boot feature defined in UEFI2.5 Mantis 1263.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 79e7b64727
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch adds more check in SmmIsBufferOutsideSmmValid(), to make sure that
SMM communication buffer is only EfiReservedMemoryType/EfiRuntimeServicesCode/
EfiRuntimeServicesData/EfiACPIMemoryNVS. So that the communication buffer will
not touch any OS memory.
The assumption is that a platform reports valid SMM communication buffer at
EndOfDxe, because EndOfDxe is last hook point that SMM code can call-out to
get memory map information.
A platform MUST finish SMM communication buffer allocation before EndOfDxe.
If a DXE or OS driver need do communication after EndOfDxe, it can either
allocate SMM communication buffer before EndOfDxe and save it, or consume
EDKII_PI_SMM_COMMUNICATION_REGION_TABLE table to get general fixed comm buffer.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
From Intel(R) 64 and IA-32 Architectures Software Developer's Manual, one lock
or semaphore is suggested to be present within a cache line. If the processors
are based on Intel NetBurst microarchitecture, two cache lines are suggested.
This could minimize the bus traffic required to service locks.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current AcquireSpinLock() will check if timeout happens when PcdSpinLockTimeout
is not zero, even though the spin lock is already released. It may do
unnecessary operation to read timer's counter. This update is trying to acquire
spin lock firstly. If it could be acquired successfully, needn't to check
timeout at all.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Microsoft Debug Port Table 2 (DBG2) specification revision
October 6, 2015 adds support for Serial Port Subtypes for ARM.
This patch adds these definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Serial Port Console Redirection Table specification Version 1.03 -
August 10, 2015 adds support for Serial Port Subtypes for ARM. These
Subtypes are described in the Table 3 of the Microsoft Debug Port Table
2 (DBG2) Specification - December 10, 2015.
This patch adds macro definitions for these.
Code at: 79678a0f39
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
These definitions are defined in SD physical layer simplified spec
and eMMC electrical standard spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The definitions are defined in TCG storage core and opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PcdUartDefaultReceiveFifoDepth is added to indicate UART default
receive FIFO depth.
Type of UINT16 is enough for FIFO depth.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
As the SMBIOS table types belong to the SMBIOS standard, they were
moved from the SMBIOS Protocol header into the SMBIOS
IndustryStandard header without the EFI_-prefix. Defines with the
EFI_-prefix have been kept in the Protocol header for
backwards-compatibility, resolving to the IndustryStandard defines.
The same has been done with the C types.
The SMBIOS table header structure had been duplicated -
SMBIOS_STRUCTURE in the IndustryStandard header and
EFI_SMBIOS_TABLE_HEADER in the Protocol file - and thus the
Protocol type was replaced with a typedef to the InudstryStandard's.
This doesn't only make it easier to maintain, but it also prevents
potential future issues as the Protocol type has been aligned, while
the standard and the IndustryStandard header declare it as
byte-packed.
This has worked well till now only because the members of the
structure do not require alignment yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is a small convenience function that eases signaling an event group
(identified by GUID). An example where it can be used is Platform BDS
signaling the End-of-DXE event group.
The naming follows EfiNamedEventSignal().
The patch modifies the library class header, and updates the most commonly
used library instance at once. Other library instances in the edk2 tree
will be adapted in the following patches.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The InternalEmptyFunction() is currently only used by code in
"UefiNotTiano.c" -- "Library functions that abstract areas of conflict
between framework and UEFI 2.0.". In the next patches,
InternalEmptyFunction() will be used from "UefiLib.c" as well, hence
promote it to "general utility" status: move the function definition to
"UefiLib.c", and place the function declaration (which is already extern)
into "UefiLibInternal.h".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gEfiIa32X64ProcessorErrorSectionGuid and
gEfiArmProcessorErrorSectionGuid to
match the definition in the UEFI 2.6 specification Table 249.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Star Zeng
hegdenag
Jiewen Yao
Jeff Fan
Darbin Reyes
Jiaxin Wu
Liming Gao
Hao Wu
Zenith432
Michael Zimmermann
Samer El-Haj-Mahmoud
Eric Dong
Zhang, Chao B
Ruiyu Ni
Sami Mujawar
Feng Tian
Heyi Guo
Marvin Häuser
Laszlo Ersek
Cecil Sheng