REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4347
To put UiApp.inf and BootManagerMenuApp.inf to proper FV(BDSFV)
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4417
Since UefiPayload had supported multiple FV,
move Network.fdf.inc to new firmware volume and
add this network FV into elf file.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Linus Wu <linusx.wu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
BDS module was moved from DXEFV to newly created BDSFV recently.
Non-universal UEFI payload doesn't support multiple FV, so it failed
to boot since BDS module could not be found.
This patch add BDS back to DXEFV when UNIVERSAL_PAYLOAD is not set.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4196
Since UefiPayload had supported multiple fv,
move bdsdxe.inf to new firmware volume and
modify the script of UniversalPayloadPkgBuild.py to
support bdsdxe fv in elf file
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: MarsX Lin <marsx.lin@intel.com>
If the boot logo is enabled, this will allow edk2 to pass the logo
to the OS via ACPI.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Add a macro called BOOTSPLASH_IMAGE, which when enabled, will
display a logo at boot time.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4006
Add CRYPTO_PROTOCOL_SUPPORT to decide CryptoDxe built into UPL.efi
If CRYPTO_PROTOCOL_SUPPORT is true, BIOS will use crypto protocol
instead of building OpensslLib into drivers.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3979
Add CryptoDxe into UPL.
Drviers can locate protocol instead of building openssl lib into drivers.
This can reduce the binary size that UPL required.
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
Chanage the name "Uiapp" to "Enter Setup".
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a Macro to enable performance measurement feature.
For any platform that uses UniversalPayload, we assume it supports
BaseCpuTimerLib and use it to align timerlib to get more accurate
performance result.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3729
Put ReportStatusCodeRouterRuntimeDxe and StatusCodeHandlerRuntimeDxe in
DXE Apriori list to enable DEBUG() via serial port through
PeiDxeDebugLibReportStatusCode DebugLib instance as early as possible.
The earliest point to add them is right before BlSupportDxe.
Signed-off-by: Gao Cheng <gao.cheng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Add SMM variable support for universal UEFI payload.
By default they are disabled.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
The SecurityStubDxe driver may be provided by platform payload.
In UefiPayloadPkg\UefiPayloadPkg.fdf file, SecurityStubDxe should only
be included if SECURITY_STUB_ENABLE is TRUE
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add Macro to enable or disable RamDiskDxe and SioBusDxe drivers.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Include Network modules in UefiPayloadPkg.dsc and UefiPayloadPkg.fdf
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Sravanthi <k.kavyax.sravanthi@intel.com>
Include core modules in UefiPayloadPkg.dsc and UefiPayloadPkg.fdf
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Sravanthi <k.kavyax.sravanthi@intel.com>
V1: Add quotes when using $(ARCH) in .dsc and .fdf file.
The quotes are added due to the way by which Core ci parse the .dsc file.
Add UINTN in Hob.c to fix cast from pointer to integer of different size error.
V2: Delete lines which reference ShellBinPkg.The pkg doesn't exist in edk2.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch doesn't change the default behavior.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add macro EMU_VARIABLE_ENABLE and DISABLE_RESET_SYSTEM to include
or exclude some drivers from Payload
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add a new macro "UNIVERSAL_PAYLOAD" to build Universal Payload.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
From SysTableInfo Hob, get ACPI table address, and create
gUniversalPayloadAcpiTableGuid Hob to store it.
Remove directly adding ACPI table to ConfigurationTable.
Dxe ACPI driver will parse it and install ACPI table from Guid Hob.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The PciLib depends on PCDs
- PcdPciExpressBaseAddress
- PcdPciExpressBaseSize
being updated by BlSupportDxe before MMCONF accesses are working.
Add BlSupportDxe to APRIORI to start it first and get the system into
an usable state where at least PCI accesses work reliable.
Fixes a bug where BlSupportDxe is scheduled too late and other DXEs fail
to load due to broken PCI access.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
As the TerminalDxe significantly slows down the boot menu rendering,
add the DISABLE_SERIAL_TERMINAL option to disable it at build time.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
When build UEFI payload using NOOPT, it would build failure since
the FV size. So this patch increases FV size to support NOOPT.
If not NOOPT build, there is no change to FV size.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Since legacy PIC 8259 driver would be removed from edk2,
update UEFI payload to remove 8259 driver.
If required, bootloader could disable 8259.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
This reverts commit a1539c4695.
This change will be pushed after edk2-stable201905
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Since legacy PIC 8259 driver would be removed from edk2,
update UEFI payload to remove 8259 driver.
If required, bootloader could disable 8259.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
MarsX Lin
Linus Wu
Guo Dong
Kavya
Sean Rhodes
PaytonX Hsieh
James Lu
Xie, Yuanhao
Liu, Zhiguang
Cheng, Gao
duntan
Patrick Rudolph
Dong, Guo
Liming Gao