The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In case of the DHCP and PXE services on different servers,PXEv6 boot will
failure when DhcpBinl offer received. The issue is caused by the following
reasons:
* PXE Client doesn't append VENDOR_CLASS request parameter, so the
offer replied from DHCP service will not contain VENDOR_CLASS option
(16).
* Once the DhcpBinl offer is selected, the boot discover message should
be sent out to request the bootfile by this offer. Current implementation
always use servers multi-cast address instead of BootFileUrl address in
dhcp6 offer. we should check it first, then decide whether use multi-cast
address or not.
* If DhcpBinl offer is selected, the boot discover message shouldn't
find server ID Option from DhcpBinl offer. That's incorrect because DHCP
service and PXE service on different servers. In such a case, we can ignore
the Server ID Option.
With the above fix in the patch, PXEv6 can boot successfully when DhcpBinl
offer received.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
if the server name expressed as a site local address begain with FEC0
when retrieving from dhcpv6 option 59 boot file url, it incorrectly process it
as a dns name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
if we already established a iSCSI connection from initiator to target
based on IPv4 stack, after using reconnect -r command, we can not rebuild
the session with the windows target, since the server thought the session
is still exist. This issue is caused by wrong place of acquire ownership of
sock lock which lead the iSCSI can not reset the connection correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Define one new internal function to clean the file content.
TlsAuthConfigDxe open file by FileExplorerLib. It need to close
file handler and free file related resource in some cases.
* User enrolls Cert by escape the Config page.
* The Cert is not X509 type.
* User chooses another file after he selected a file.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Chao Zhang<chao.b.zhang@intel.com>
When PXE10/WFM11a offer received, we should only cache
the first PXE10/WFM11a offer, and discard the others. But
Current we discard all PXE10/WFM11a offer. This patch is
to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
UINT32 integer overflow will happen once the download OS image over
4G size. This patch is to fix this issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
If we set PXEv6 as the first boot option and reboot immediately
after the first successful boot, it will assert. the root cause is
when we set the policy from manual to automatic in PXE driver,
the ip6 Configure item size is already set to zero and other
structures are also released, So it is not needed to perform DAD call
back function which is invoked by Ip6ConfigSetMaunualAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Need to check variable of mPrivate whether is
null before used and redefine the array length
of target address for keyword.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Add check logic and error message for some keywords validity.
show target address in URL format and MAC address correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
According UEFI Spec, set to zero StationIp means to let the underlying
IPv6 driver choose a source address. But currently, DNSv6 always return
EFI_NO_MAPPING. The issue is caused by below bugs in DnsDxe:
* Incorrect TPL(TPL_CALLBACK) usage during UDP configuration.
* Failed to create the timer used to get IPv6 mapping
* Doesn't check the Ip6Mode.IsStarted flag.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Currently, error handling in IScsiDriverEntryPoint is incorrect. For
example, if IScsiCreateAttempts() return error due to the limited max
variable size, iSCSI will not unload the configuration entries.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
v2: Handle error case in SockCreateChild and fix typo issue
when we destroy the socket Sock and its associated
protocol control block, we need to first close the
parent protocol, then remove the protocol from childHandle
and last to free any data structures that allocated in
CreateChild. But currently, we free the socket data (Socket ConfigureState)
before removing the protocol form the childhandle. So if the up layer
perform the driverbing stop to abort tcp session and send the tcp reset
packet, it will failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Since we use the Attempt and index as the attempt variable name instead of
the MAC address plus index, we need to update this to check the whether
the Controller handle is configured to use DNS protocol
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Nil UUID is a special case with all zeros value. This
patch is to handle this case to avoid the invalid DUID.
Cc: Naveen Santhapur <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Define the prompt and help information for PcdMaxIScsiAttemptNumber.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2: need to check the global variable mPrivate before using it in
the Convert AttemptConfigData To IfrNvData by Keyword function.
Add check logic for some attempt variable to enhance code in iSCSI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
Add error handling if can not create Attempts in driver entry point.
Since we support to define a macro be a PCD value, we enhance our code
by modifying the structure in IFR_NVDATA. This effect code logic mainly
in Creating Keywords,Convert IFR NvData To AttemptConfigData ByKeyword and
reverse function.
Fix typo errors and sync based on the latest code.
Enable iSCSI keywords configuration based on x-UEFI
name space. we introduce new PCD to control the attempt
numbers which will be created in non activated state, besides
the Attempt name is changed to READ_ONLY attribute in UI.
We can invoke KEYWORD HANDLER Protocol to configure
the related keywords.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin jiaxin.wu@intel.com
Currently, When there are more than 9 Ethernet ports available,
'ifconfig6 -l' is not listing all the ports, only show the ports 0 to 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
IANA has approved below new media type for EFI http(s) boot usage:
application/vnd.efi.img
application/vnd.efi.iso
HTTP boot driver should be updated to check the above media type
from Content-Type header field.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is to update the HTTP token notify as a DPC at
TPL_CALLBACK to align with UEFI Spec.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Update existing #define and add a new #define used for the
PCD PcdIScsiAIPNetworkBootPolicy. Update the code in iScsiStart
according to the #define changes in iScsiDriver.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When we create a HTTP driver service binding private
instance, there may be different DriverBindingHandle
for Ipv4 or Ipv6, so it is essential to distinguish
the HttpService image which will be used in open
protocol or close protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitely return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v3:
* Correct the commits grammar
v2:
* Rename the PCD to PcdAllowHttpConnections.
* Refine the PCD descriptions.
If the value of PcdAllowHttpConnections is TRUE, HTTP connections are
allowed. Both the "https://" and "http://" URI schemes are permitted.
Otherwise, HTTP connections are denied. Only the "https://" URI scheme
is permitted.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
v2:
*1. Add IScsiDnsIsConfigured function in IScsiSupported to check
attempt using DNS protocol or not.2. Fix wrongs typos in IScsiDns.c
and .uni file.3. define a macro for the length of target URL.4.
update the Copyright to 2017.
Add DNS support for target URL directly configuration in UI.
Besides, When we enable the option (Get target info via DHCP) ,
the dhcp server will return target info include the rootpath,
like the format
"iscsi:"<servername>":"<protocol>":"<port>":"<LUN>":"<targetname>
According to the RFC 4173,the server name region is expressed as
IPv4(192.168.10.20 )or IPv6 ([2000:bbbb::3]) or domain name,
but currently we only support the IP address format.
To enable this feature, we can support both.
Another enhancement is that we can deal with the data received from
the iSCSI login response with an target redirection status,
in which contains the Target Address in the format
domainname[:port][,portal-group-tag] required by RFC 3720.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The ChooseFile handler, UpdateCAFromFile, has to be EFIAPI or gcc would
use the wrong ABI and cause the crash of the firmware. This commit also
removes the unnecessary type casting in ChooseFile.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Ip6ConfigSetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is used to enable HTTPS feature. HttpDxe driver
will consume TlsDxe driver. It can both support http and https
feature, that’s depended on the information of URL, the HTTP
instance can be able to determine whether to use http or https.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch provides the UI to support TLS auth configuration.
* EFI_SIGNATURE_LIST format is used for 'TlsCaCertificate'
variable. So, TLS supports multiple certificate configuration.
* The variable attribute is BS with NV, which only target at
preventing runtime phase attack.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
v3:
* Typo fix and code refine.
* Rename the internal macros and function:
TLS_INSTANCE_FROM_PROTOCOL_THIS -> TLS_INSTANCE_FROM_PROTOCOL
TLS_INSTANCE_FROM_CONFIGURATION_THIS -> TLS_INSTANCE_FROM_CONFIGURATION
TlsEcryptPacket -> TlsEncryptPacket
v2:
* Refine the TlsEcryptPacket/TlsDecryptPacket function
according the community feedback.
This patch is the implementation of EFI TLS Service Binding
Protocol, EFI TLS Protocol and EFI TLS Configuration Protocol
Interfaces.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This commit refines the logic for HttpBootUintnToAscDecWithFormat and
PxeBcUintnToAscDecWithFormat. It avoids using the decrement operator '--'
for array index to prevent possible mis-reports by static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This patch remove the ASSERT when receive a DHCP packet large than the maximum
cache buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This patch updates the PXE and HTTP boot driver to drop the input DHCP packet
if it exceed the maximum length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to RFC 3720, the TargetAddress provided in a redirection
might be a DNS host name, a dotted-decimal IPv4 address, or a
bracketed IPv6 address. Current ISCSI driver in Networkpkg only
supports dotted-decimal IPv4 address, so we need add IPv6 address
support since it is a combo driver supporting dual stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
There may be an error happens when we use the
configure function to set or change the configuration
data for the DNS6 instance, So we will free the
DnsServerList without configured to NULL. If we reset
the instance with the parameter DnsConfigData to NULL, the
DnsServerList will be freed twice.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The BootFileURL option (59) in dhcpv6 is used to deliver
the next server address with bootfile name, as an example
"tftp://[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]/BOOTFILE_NAME;
mode=octet", it can also be “tftp://domain_name/BOOTFILE_NAME;
mode=octet”, this patch is to support this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT
once redirection occurs, which removes the possibility of the OS
to reconnect to the configured IP for load balancing. The behavior
is not explicitly described in IBFT spec, though the MSFT expert
confirm we should record original user setting rather than
publish the redirected IP.
Thanks Sriram for reviewing and validating this patch in his test-bed.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
The previous DNS server data will be retained after the policy
changes from Auto to Manual. This patch is used to clean the
previous dhcp configuration data.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
When HostNameToIp() and GeneralLookUp() are called with a invalid
host name, RCODE (4 bit field is set as part of responses) error
will returned in packet to identify the domain name referenced in
the query does not exist. So, EFI_NOT_FOUND should be returned
directly.
Current implementation only check the RCODE in successful condition.
Need update the code for more error check according to RFC 1035 4.1.1
section.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
v2:
* Code refine.
* For DnsCache, the minimum value of TTL is selected between CNAME and A/AAAA record.
According RFC 1034 - 3.6.2, if the query name is an alias, the name server
will include the CNAME record in the response and restart the query at the
domain name specified in the data field of the CNAME record. RFC also provides
one example server action when A query received:
Suppose a name server was processing a query with for USCISIC.ARPA, asking for
type A information, and had the following resource records:
USC-ISIC.ARPA IN CNAME C.ISI.EDU
C.ISI.EDU IN A 10.0.0.52
Both of these RRs would be returned in the response to the type A query.
Currently, DnsDxe driver doesn't handle the CNAME type response, which will cause
any exception result. The driver need continue the packet parsing while CNAME type
record parsed. So, this patch is used to handle it correctly.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
This path made the following update:
* Generate SPI randomly.
* Correct IKE_SPI_BASE value according RFC 4302/4303.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
*v2: update the commit log and refine the code comments.
There are three kinds of IKE Exchange process:
#1. Initial Exchange
#2. CREATE_CHILD_SA_Exchange
#3. Information Exchange
The IKE header "FLAG" update is incorrect in #2 and #3 exchange,
which may cause the continue session failure. This patch is used
to correct the updates of IKE header "FLAG" according the RFC4306
section 3.1.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
*v2: update the commit log.
IKE Initial Exchange message should cover below process:
Initiator Responder
Message1 HDR,SAil,KEi,Ni ------>
Message2 <------ HDR,SArl,KEr,Nr,[CERTREQ]
Message3 HDR,SK{} ------>
Message4 <------ HDR,SK{}
If Initial Exchange message is initiated by Linux IKE, it works well.
But the failure will happen if it's initiated by UEFI IKE. This issue
is caused by the no status check of NotifyCookiePayload.
While parsing the IKEv2 packet for IKE_SA_INIT exchange, if the packet
doesn't contain COOKIE Notify payload, EFI_INVALID_PARAMETER will be
returned from Ikev2ParserNotifyCookiePayload(). Current implementation
return this error status directly, then the session will be broken. The
correct behavior should check this status. If no COOKIE Notify payload,
initiator don't need to retry the IKE_SA_INIT.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the AttemptConfig structure
will be freed, but the mCallbackInfo->Current is not
configured as null and this pointer will be used again in
IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxeBcDxe.lib(PxeBcBoot.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 148 in file NetworkPkg\UefiPxeBcDxe\PxeBcBoot.c. The
third parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IScsiDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
IScsiDxe.lib(IScsiProto.obj) : error LNK2001: unresolved external symbol
__allmul
The cause is line 141 in file NetworkPkg\IScsiDxe\IScsiProto.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The size of the ClassIdentifier is apparently wrong in the structure. In my
testing it caused the vendor class data to be displayed as bogus
"HTTPClient:Arch00016x:UNDI00300". After correcting the size the vendor class
data is "HTTPClient:Arch00016:UNDI003000" which looks good to me.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
The bug existed in replacing AsciiStrToUnicodeStr with AsciiStrToUnicodeStrS,
since MacString now is a pointer, the value sizeof(MacString)/sizeof (MacString[0])
is not correct here as the third parameter.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After boot image has been downloaded, the HTTP boot driver leaves the service
in the started state, with an active TCP child. This may cause some problems:
1. The HTTP session may become unavaiable after a while, then a following HTTP
Boot will fail.
2. An active TCP child will send RST to any incoming TCP message, which may
break other driver which tries to setup a TCP connection.
The HTTP boot driver doesn't provide any interface to the boot loader, so it's
unnecessary to keep the service running after a boot image is downloaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
The commit of 6b16c9e7 removes ASSERT and use error handling
in IpSecDxe driver, but may cause the potential NULL pointer
dereference. So, this patch is used to avoid NULL pointer
dereference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
v2:
*Since we have redefined the name of arch types in Dhcp.h for http boot,
it need to change corresponding codes.
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*Fix some memory leak issue.
This patch is used to replace ASSERT with error handling in Http boot
Driver and IScsi driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Use goto to simplify code logic.
This patch is used to replace ASSERT with error handling in
DnsDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is used to refine the code by removing ASSERT and
using error handling in IpSecDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
This patch is used to fix unspecified address use case in
ConstructSpdIndexer() function. Indexer->Name for
ConstructSpdIndexer is unspecified, that will be a problem
for UnicodeStrToAsciiStr.
This patch also refine the code by removing ASSERT and user
error handling.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
QClass value may be not equal to 1(DNS_CLASS_INET) when
GeneralLookUp query is called. So, remove QClass value check.
Moreover, the 'Identification' and 'Type' filed in Query packet
should not be changed to little endian since the packet maybe
retransmitted while there is any error happened.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
TokenEntry should be removed from Token list before freed.
Otherwise, invalid TokenEntry will be existed in Token list.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is used to fix HTTP IPv6 boot failure in diff net segment
issue. IPv6 gateway address should be registered before DNS query,
otherwise, DNS query will fail.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
This patch is used to handle timeout case when downloading
the message. The Status in the token should also be checked
to handle any response error case including timeout case.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Remove timeout check for http body message receive. It should be handled
in HttpBootDxe driver for http response unblocking implementation. After
timeout removed, the Wrap date should not be freed immediately. Only the
TCP CompletionToken in Wrap date is canceled or signaled, the Wrap date
could be freed.
In addition, Http cancel token is also incorrect. Tcp Cancel should be called
to cancel TCP CompletionToken in Wrap date before close it directly. Otherwise,
some exception behavior may happened.
This patch also refine the coding style for HttpDxe driver.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
This path is used to support TCP Cancel function to abort an
asynchronous connection, listen, transmission or receive request.
If any TCP CompletionToken is not signaled, it should not be closed
directly by calling CloseEvent (Still in the TCP TokenList). If not,
any exception behavior may be triggered. We should cancel it by calling
Tcp->Cancel() first. In such a case, TCP Cancel function is
necessary.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
In Ip6CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This patch updates the HTTP driver to initialize the local variable for NULL
and check the NULL pointer before dereference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The HTTP Token Wrap is created in EfiHttpResponse() and then passed
to the deferred Receive event callback, HttpTcpReceiveNotifyDpc.
HttpTcpReceiveHeader and HttpTcpReceiveBody use a Tcp polling loop to
monitor the socket status and trigger the Receive event when a new
packet arrives. The Receive event brings up HttpTcpReceiveNotifyDpc
to process the HTTP message and the function will set Wrap->TcpWrap.IsRxDone
to TRUE to break the Tcp polling loop.
However, HttpTcpReceiveNotifyDpc mistakenly freed Wrap, so the Tcp
polling loop was actually checking a dead variable, and this led the
system into an unstable status.
Given the fact that the HTTP Token Wrap will be freed in EfiHttpResponse
or HttpResponseWorker, this commit removes every "FreePool (Wrap)" in
HttpTcpReceiveNotifyDpc.
v2:
* Free Wrap after HttpTcpReceiveBody returns normally.
Cc: "Wu, Jiaxin" <jiaxin.wu@intel.com>
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "El-Haj-Mahmoud, Samer" <samer.el-haj-mahmoud@hpe.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Hegde, Nagaraj P" <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
SockProcessRcvToken only returns the number of the received bytes, not
an EFI Status.
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "Jiaxin Wu" <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Code changes enables HttpDxe to handle PUT/POST operations.
EfiHttpRequest assumes "Request" and "HttpMsg->Headers" can
never be NULL. Also, HttpResponseWorker assumes HTTP Reponse
will contain headers. We could have response which could contain
only a string (HTTP 100 Continue) and no headers. Code changes
tries to do-away from these assumptions, which would enable
HttpDxe to support PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P nagaraj-p.hegde@hpe.com
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Per the description of HttpBootGetBootFile, the function should return
EFI_BUFFER_TOO_SMALL if the given buffer is smaller than the remote image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
If two attempts added on different NIC and enable
MPIO attribute, then change the attempts order. If
both two attempts succeed to connect the target,it
should abort the later one in the order and uninstall
ExtScsiPassThruProtocol Interface, But now it
unistall it twice.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Make sure "File" field is not overloaded to carry other DHCP options before use
it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Make sure "File" field is not overloaded to carry other DHCP options before use
it in HTTP boot driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
We always need to call EfiBootManagerFreeLoadOption because the memory allocated
for NewOption (description and device path) is no longer needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This issue can be reproduced by the following steps:
1. Boot to HTTP boot option and the boot file is a ISO file like Ubuntu PE image.
2. Exit from boot option (GRUB) and then back to boot manager menu.
3. Boot to the same HTTP boot option again or a HTTP boot option pointing to the same HTTP ISO file. It will fail to boot.
Root cause:
When booting a HTTP boot option, the HTTP boot driver will save the Boot File's information in its private data as cache data for skipping the Boot file discovery from next time boot. However, the cache data doesn't include ImageType data, which would cause HTTP boot driver using the invalid ImageType (ImageTypeMax) and then fail to boot the cached boot file. In other words, for the second time boot, the HttpBootLoadFile() doesn't update ImageType (it returns a valid ImageType), which causes that the HttpBootDxeLoadFile() skips to Register a RAM Disk for downloaded HTTP ISO file and then BDS code can't find the RAM disk to boot.
Solution:
Save ImageType to private data for next time HTTP boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
EFI_PXE_BASE_CODE_PROTOCOL has interface to set the TTL and ToS value, but
not used by the UdpWrite() interface. The code always use a hard coded 16
for the TTL and 0 for ToS.
This patch update the UpdWrite() to use the TTL and ToS which have been set
by the SetParameters().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This patch updates the HTTP boot driver to use the API in UefiBootManagerLib to
create new load option, to avoid duplicate code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: : Ye Ting <ting.ye@intel.com>
Reviewed-by: : Ni Ruiyu <ruiyu.ni@intel.com>
FragmentBuffer of each TcpWrap in HttpDxe should not be
freed in HttpTcpTokenCleanup(). This buffer points to
HttpMsg body actually, which is the responsibility of the
caller to allocate a buffer for Body.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Need the timer check to avoid the indefinite wait case
in HttpDxe driver
A.HTTP receive Header process in HttpTcpReceiveHeader();
B.HTTP receive Body process in HttpTcpReceiveBody();
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
HttpGenRequestString is updated to HttpGenRequestMessage,
with an additional argument. This patch updates the caller
of the DxeHttpLib API. Also, we will avoid adding any '\0'
to the string, which was added to make AsciiStrLen to
work on the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This patch updates the HTTP Boot Configuration page to allow the user to create
a corporate mode HTTP boot option, by leaving the URI string empty.
The patch also fix a bug that the L"https://" should use StrnCmp() with Length 8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
EFI_NOT_READY should not be treated as an error status
returned from SetData for Ip6ConfigDataTypeManualAddress
since there is an asynchronous operation for DAD process.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
This patch updates the HTTP Boot driver to support the download and boot
a RAM disk image from HTTP server.
The HTTP RAM disk boot is described in section 23.7 "HTTP Boot" in
UEFI 2.6. HTTP server could provide either an UEFI image or a RAM disk image
for the HTTP boot client to use. The RAM disk image must contain a UEFI
compliant file system in it.
HTTP boot driver will identify the image type either by the "Content-Type"
entity header filed or by the file name extension as below:
"application/efi" or *.efi -> EFI Image
*.iso -> CD/DVD Image
*.img -> Virtual Disk Image
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
v2:
*refine some codes
Add 2 macros in NetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
Arbitrary length of packet may be received from network, including the
packets with zero payload data or malformed protocol header. So the code
much check the actually received data size before using it. For example, in
current edk2 network stack, an zero payload UDP packet may cause the
platform ASSERT in NetbufFromExt() because of the zero fragment number.
This patch update the IpIoLib and UdpIoLib to check and discard the zero
payload data packet to avoid above assert. Some other network drivers are
also updated to check the packet size to guarantee the minimum length of
protocol header is received from upper layer driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
when to parse the DHCP6 reply packet,there will be 6
bytes offset before the option data according to
RFC 3315.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
When http boot download the second time without return
out of the boot manager, the DHCP process will start twice
with the same Boot file uri and print the information twice
which we not expected. This is caused by wrong logic
of handling the device path of the boot file when loading it.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According to UEFI spec, HII_Config_Access.RouteConfig() should return success
if the required configuration has been processed. Current HTTP boot driver
may return error code in some situation, which failed the UEFI SCT test.
This patch fix this issue by removing the returned error status code and adding
extra check point in the Callback() function, which will pop up a message box
if user input an unsupported URI string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Dong Eric <eric.dong@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The HTTP Boot driver have some UEFI driver model problems which will make the
code ASSERT when it's disconnected.
First, the driver opens the HttpSb protocol BY_CHILD without BY_DRIVER attribute.
So the driver binding stop won't be called when HTTP driver is disconnected, so
a child handle is left and made HTTP driver binding stop function goes into error.
This patch remove this unnecessary OpenProtocol and only unload the HII from when
both the IP4 and IP6 stack have been stopped completely.
The second issue is the HTTP boot driver always use the driver's image handle as
it's driver binding handle, it's not correct. HTTP Boot driver provides 2 separate
driver binding protocols from IP4 and IP6 stack, so it has 2 driver binding handle.
So this patch fix the code to use correct driver binding handle when create/open
a HTTP child handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This issue is caused by the string token ID for help message,
which is defined in the internal head file.
This head file is used for reference more than once. So,
multiple definition for the string token ID error will be
enrolled.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang, Lubo <lubo.zhang@intel.com>
After submitting changes for HttpLib, other modules should be able to use
those functions
1 remove the private function and their calls
2 update it with the functions from httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Commit fa848a4048 ("NetworkPkg: Add URI configuration form to HTTP boot
driver") causes the build to fail with gcc:
> NetworkPkg/HttpBootDxe/HttpBootConfig.c: In function
> 'HttpBootAddBootOption':
> NetworkPkg/HttpBootDxe/HttpBootConfig.c:148:14:
> error: passing argument 3 of 'GetVariable2' from incompatible pointer
> type [-Werror]
> );
> ^
> In file included from NetworkPkg/HttpBootDxe/HttpBootDxe.h:31:0,
> from NetworkPkg/HttpBootDxe/HttpBootConfig.c:15:
> MdePkg/Include/Library/UefiLib.h:708:1: note: expected 'void **' but
> argument is of type 'CHAR16 **'
> GetVariable2 (
> ^
> cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*Modify the logic of show SAD,SPD and PAD help info, include them in -?
instead of follow -p command.
Since Shell supports finding help information from resource section
of application image. We modify the Shell application Under NetworkPkg
to support print help information string using -? command.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch updates the HTTP boot driver to produce a setup page for the boot
file URI configuration. A new boot option will be created for the manual
configured URI address. This change is made to support the HTTP boot usage
in home environment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
'eb213f2f' is associated with '3d0a49ad' commit. So, this patch is
used to respond the revert for '3d0a49ad' to adapt the Ipv4 config
policy update.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic,
which results in all NIC ports starting SARR process when it
receives RA message with M flag from IPv6 router. So, this
patch is used to changes the the default IPv6 config policy to
Ip6ConfigPolicyManualand also defer the SetData operation after
Ip6ConfigProtocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip6ConfigProtocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Change HttpDxe and HttpBootDxe to use the standard definitions from
Http11.h instead of private duplicate definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is used to replace the internal function with
the exposed one defined in NetLib.h.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Fix a minor grammatical error in the PXE boot message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v4:
* Update macro HTTP_ERROR_STATUS to HTTP_ERROR_OR_NOT_SUPPORT_STATUS_CODE
Update copyright year.
When the Error Status of ResponseData returned from HttpIoRecvResponse
function during the Http HEAD method, it should also return error status
to Load file protocol.
Add a new error status code EFI_HTTP_ERROR in corresponding with the
UEFI 2.6 spec . When a HTTP error occurred during the network operation,
The EFI_HTTP_ERROR is returned in token.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch is used to fix suspicious dereference of pointer 'Mode.Ia'
before NULL check.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Fu Siyuan
Jiaxin Wu
Zhang, Lubo
Hao Wu
hegdenag
Liming Gao
Thomas Huth
Gary Lin
Laszlo Ersek
Ye Ting
Michael Chang
Giri P Mudusuru
Star Zeng
Fu, Siyuan
Zhang, Lubo
Sunny Wang
Ghazi Belaam
Samer El-Haj-Mahmoud