BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1088
Per UEFI spec, the fake capsule image with the header only is a valid case
in QueryCapsuleCpapbilities(). So, SupportCapsuleImage() is updated to
support this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Substitute HttpIoCharToUpper with AsciiCharToUpper which is a public function
with the same effect. And remove the implement of HttpIoCharToUpper.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1482
Add a new function to support Capsule-on-Disk feature.
This function is used to get next full DevicePath from a load option.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In some cases, such as MD RAID1 in Linux, the bootloader may be in a
nested EFI system partition partition. For example, sda1 and sdb1 are
combined as md0 and the first partition of md0, md0p1, is an EFI system
partition. Then, the bootloader can be located by the following device
paths:
PCI()/SATA(sda)/Partition(sda1)/Partition(md0p1)/File(bootloader.efi)
PCI()/SATA(sdb)/Partition(sdb1)/Partition(md0p1)/File(bootloader.efi)
To make the boot option more resilient, we may create a boot option with
the short-form device path like "Partition(md0p1)/File(bootloader.efi)".
However, BmMatchPartitionDevicePathNode() only matched the first
partition node and ignored the nested partitions, so the firmware would
refuse to load bootloader.efi since "Partition(md0p1)" doesn't match
either "Partition(sda1)" or "Partition(sda2)".
This commit modifies BmMatchPartitionDevicePathNode() to iterate all
nested partitions so that the above boot option could work.
v2 - Simplify the node matching logic
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Permit CheckUefiLib to be used by MM_STANDALONE modules. Since this
library has a constructor, change the library's module type into
BASE so its constructor prototype is compatible with MM_STANDALONE
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add MM_STANDALONE to the list of permitted module types of the
VarCheckLib library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
AuthVariableLibNull library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of
MemoryAllocationLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
The comments are incorrect for the base version of this lib.
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Expose BaseSortLib for use in SEC and PEI phases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove unused module type restriction for NULL instance.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This change is to pass static analysis.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem
The library Pcdlib is not linked， so "#include <Library/PcdLib.h>"
is deleted.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch is to resolve the lock-up issue if the value of HTTP header
is blank. The issue is recorded @
https://bugzilla.tianocore.org/show_bug.cgi?id=1102.
Cc: Stephen Benjamin <stephen@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Stephen Benjamin <stephen@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process.
When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine
whether destination IP address is on-link or not, so it will always try to send all the
packets to the destination IP address directly first, if failed it will continue
to try the default gateway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1100
SmmCorePerformanceLib consume the DxeServicesLib, but miss to
add the library class in INF file.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
DxeSmmPerformanceLib previously is used by DP tool.
But in new pweformance infrastructure, we have updated
Dp tool to get the performance data from firmware
performance data table in ACPI.
Now the DxeSmmPerformanceLib is not used by
any module. So remove it from edk2 code base to
avoid being used by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add NULL check to the return buffers from GetFmpHandleBufferByType().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Hao A Wu <Hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <Hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current DxeCapsuleLibFmp always do reset for FMP capsule.
Actually, the code should use Attributes from FMP descriptor to know
whether reset is required or not.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The code to check FmpImageSize again OFFSET_OF
(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, UpdateHardwareInstance)
can be refined to check against FmpImageHeaderSize.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The patch adds a new API PlatformBootManagerUnableToBoot()
to PlatformBootManagerLib.
The new API is provided by platform bds library and is called when
no boot option could be launched.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After calling SetVariable, the allocated memory in Variable should be
freed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In mSmmBootPerformanceTable there are two parts,
one is the FPDT table header and the other is FPDT records.
Currently:
mPerformanceLength: The length of existing FPDT records.
mMaxPerformanceLength: The maximum length allocated for
mSmmBootPerformanceTable(including FPDT table header length
and existing FPDT records length)
But when compare mPerformanceLength with mMaxPerformanceLength
to check whether need to allocate new buffer for new FPDT
record, we miss to add mPerformanceLength with header length,
which will cause pool allocation behavior is not correct.
Now update the mPerformanceLength to fix this issue:
updated mPerformanceLength = FPDT table header length
+ existing FPDT records length.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
RESET_UTILITY_GUID_SPECIFIC_RESET_DATA structure should be declared
as pack(1).
The patch adds the missing pack(1) pragma.
(GUID *)((UINT8 *)&ResetData +
OFFSET_OF (RESET_UTILITY_GUID_SPECIFIC_RESET_DATA, ResetSubtype))
is used to replace &ResetData.ResetSubType to resolve C4366 VS
compiler warning.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch adds check logic to make sure that for a input BMP file,
the width or height is not 0; for a input GOP blt buffer, the width
or height is not 0. Otherwise, UNSUPPORTED status is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Replace old Perf macros with the new added ones.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the performance library instances in MdeModulePkg
to implement the APIs used for new added Perf macros.
V2:
Share the common logics of creating FPDT record for
new added Perf macros and existing Perf macros.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Constructor is too early that ConnectAll() may not do. Move refresh boot
option in form open.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Xu WeiX <weix.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If the first call to UpdateImageProgress() fails, there is no point
in passing a pointer to it to Fmp->SetImage(), since it is highly
unlikely to succeed on any subsequent calls.
This permits the FMP implementation to fall back to an alternate means
of providing feedback to the user, e.g., via the console.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Put the UART in FIFO Polled Mode by clearing IER after setting FCR.
Also, add comments to show DLAB state for registers 0 and 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Star Zeng <star.zeng@intel.com>
CC: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
* Change Update_Image_Progress() to UpdateImageProcess()
* Call DisplayUpdateProgressLib from UpdateImageProgress().
* Split out a boot service and runtime version of
UpdateImageProgress() so the DisplayUpdateProgressLib is
not used at runtime.
* If gEdkiiFirmwareManagementProgressProtocolGuid is present,
then use its progress bar color and watchdog timer value.
* If gEdkiiFirmwareManagementProgressProtocolGuid is not present,
then use default progress bar color and 5 min watchdog timer.
* Remove Print() calls during capsule processing. Instead,
the DisplayUpdateProgressLib is used to inform the user
of progress during a capsule update.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Make the comment align with Edk2 coding style.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current DxeResetSystemLib depends on UefiRuntimeLib because it calls
EfiResetSystem() API exposed by UefiRuntimeLib.
Due to the commit:
"MdePkg/UefiRuntimeLib: Do not allow to be linked by DXE driver"
which reverts UefiRuntimeLib to only support DXE_RUNTIME_DRIVER,
removing UefiRuntimeLib dependency makes the DxeResetSystemLib
can be used by DXE drivers.
The patch also disallows the DxeResetSystemLib to be linked by
runtime driver, SMM drivers.
Runtime driver cannot link to this library because the gRT is not
converted when entering to RT.
SMM driver cannot link to this library because calling RT services
from SMM after EndOfDxe violates security guideline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=801
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
Add DisplayUpdateProgressLib instances for text consoles
and graphical consoles.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Liming Gao
Shenglei Zhang
Chen A Chen
Gary Lin
Ard Biesheuvel
Jaben Carsey
Jeff Brasen
Jiewen Yao
Jiaxin Wu
Star Zeng
Fu Siyuan
Bi, Dandan
Ruiyu Ni
Thomas Palmer
Leo Duran
Kinney, Michael D