BdsEntry marks the read-only variables if the Variable Lock protocol exists.
So, this protocol usage is updated from CONSUMES to SOMETIMES_CONSUMES.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When capsule updates are staged for processing after a warm reboot,
they are copied into memory with the MMU and caches enabled. When
the capsule PEI gets around to coalescing the capsule, the MMU and
caches may still be disabled, and so on architectures where uncached
accesses are incoherent with the caches (such as ARM and AARCH64),
we need to ensure that the data passed into UpdateCapsule() is
written back to main memory before performing the warm reboot.
Unfortunately, on ARM, the only type of cache maintenance instructions
that are suitable for this purpose operate on virtual addresses only,
and given that the UpdateCapsule() prototype includes the physical
address of a linked list of scatter/gather data structures that are
mapped at an address that is unknown to the firmware (and may not even
be mapped at all when UpdateCapsule() is invoked), we can only perform
this cache maintenance at boot time. Fortunately, both Windows and Linux
only invoke UpdateCapsule() before calling ExitBootServices(), so this
is not a problem in practice.
In the future, we may propose adding a secure firmware service that
permits performing the cache maintenance at OS runtime, in which case
this code may be enhanced to call that service if available. For now,
we just fail any UpdateCapsule() calls performed at OS runtime on ARM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Commit 180ac200da changes the input parameter
from BOOLEAN to UINTN. Its comparison logic should be updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Replace the call to and implementation of the function
FpdtAllocateReservedMemoryBelow4G() with a call to
AllocatePeiAccessiblePages, which boils down to the same on X64,
but does not crash non-X64 systems that lack memory below 4 GB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If Fvb is a NULL, return EFI_UNSUPPORTED.
If the remaining size is not enough, return EFI_OUT_OF_RESOURCES.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Fix the issue that failed to update or add a UEFI variable if the remaining size is equal to the data size
of the variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: cinnamon shia <cinnamon.shia@hpe.com>
Signed-off-by: Ansen Huang <ansen.huang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
AcpiPlatformDxe solely performs one-time tasks and does not expose
any services or create any events. Hence it can safely be unloaded
after the Entry Point execution by returning an error code.
V2: Return EFI_REQUEST_UNLOAD_IMAGE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=917
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=933
We see UEFI spec is saying to use EfiBootServicesData for ESRT table.
UEFI 2.7 chapter 23.3:
The ESRT shall be stored in memory of type EfiBootServicesData.
And we see EsrtDxe is using AllocatePool for ESRT table, but
EsrtFmpDxe is using AllocateRuntimeZeroPool for ESRT table.
This patch updates code to use EfiBootServicesData for ESRT table
in EsrtFmpDxe.
Change-Id: I72a73e0cc0a37e429cc262d68eb284fb268cb5ef
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
We have updated performance infrastructure in previous commits:
between
73fef64f14
and
115eae650b
Update FPDT drivers to collect the performance data reported by
gEdkiiFpdtExtendedFirmwarePerformanceGuid.
The old implementation which collected performance data through
gEfiFirmwarePerformanceGuid is not supported now.
We should add error message to remind user for this unsupported
case in case anyone use it by mistake.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The variable driver doesn't distinguish "non-volatile non-authenticated"
variables from "volatile non-authenticated" variables, when checking
individual variable sizes against the permitted maximum.
PcdMaxVariableSize covers both kinds.
This prevents volatile non-authenticated variables from carrying large
data between UEFI drivers, despite having no flash impact. One example is
EFI_TLS_CA_CERTIFICATE_VARIABLE, which platforms might want to create as
volatile on every boot: the certificate list can be several hundred KB in
size.
Introduce PcdMaxVolatileVariableSize to represent the limit on individual
volatile non-authenticated variables. The default value is zero, which
makes Variable/RuntimeDxe fall back to PcdMaxVariableSize (i.e. the
current behavior). This is similar to the PcdMaxAuthVariableSize fallback.
Whenever the size limit is enforced, consult MaxVolatileVariableSize as
the last option, after checking
- MaxAuthVariableSize for VARIABLE_ATTRIBUTE_AT_AW,
- and MaxVariableSize for EFI_VARIABLE_NON_VOLATILE.
EFI_VARIABLE_HARDWARE_ERROR_RECORD is always handled separately; it always
takes priority over the three cases listed above.
Introduce the GetMaxVariableSize() helper to consider
PcdMaxVolatileVariableSize, in addition to
GetNonVolatileMaxVariableSize(). GetNonVolatileMaxVariableSize() is
currently called at three sites, and two of those need to start using
GetMaxVariableSize() instead:
- VariableServiceInitialize() [VariableSmm.c]: the SMM comms buffer must
accommodate all kinds of variables,
- VariableCommonInitialize() [Variable.c]: the preallocated scratch space
must also accommodate all kinds of variables,
- InitNonVolatileVariableStore() [Variable.c] can continue using
GetNonVolatileMaxVariableSize().
Don't modify the ReclaimForOS() function as it is specific to non-volatile
variables and should ignore PcdMaxVolatileVariableSize.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: set MaxVolatileVariableSize where Star suggested]
Reviewed-by: Star Zeng <star.zeng@intel.com>
VariableRuntimeDxe will have OnEndOfDxe() callback function at
TPL_NOTIFY level on EndOfDxe event when DXE variable solution is
used.
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
OnEndOfDxe,
NULL,
&gEfiEndOfDxeEventGroupGuid,
&EndOfDxeEvent
);
VariableSmm will have SmmEndOfDxeCallback() callback function at
TPL_CALLBACK level on SmmEndOfDxe event when SMM variable solution
is used.
SmmIplGuidedEventNotify() - PiSmmIpl.c TPL_CALLBACK on EndOfDxe
->
SmmEndOfDxeHandler() - PiSmmCore.c install SmmEndOfDxe protocol
->
SmmEndOfDxeCallback() - VariableSmm.c
The TPL level for (Smm)EndOfDxe callback between VariableRuntimeDxe
and VariableSmm is inconsistent, it will make the unified platform
code could not make sure its TPL_NOTIFY EndOfDxe callback function
(to use variable lock/check) executed before (Smm)EndOfDxe callback
function in variable driver. The variable lock/check will start to
protect after (Smm)EndOfDxe callback function in variable driver is
executed.
This patch is to algin the TPL level to TPL_CALLBACK for (Smm)EndOfDxe
callback between VariableRuntimeDxe and VariableSmm.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Add the partition type GUID for every partition to the installed handle,
this is required per the UEFI specification.
"The firmware must add the PartitionTypeGuid to the handle of every
active GPT partition using EFI_BOOT_SERVICES.InstallProtocolInterface()."
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen.qdt@qualcommdatacenter.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The example of UNION storage is not good, now update it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch should not impact the functionality.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
TPL deadlock issue was enrolled by the commit of 39b0867d. To resolve the issue,
this patch separated the timer ticking for all the MTFTP clients to calculate the
packet live time in TPL_NOTIFY level.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031a
Update BootGraphicsResourceDxe to produce both the Boot Logo
Protocol and the Boot Logo 2 Protocol.
The Boot Logo 2 Protocol service GetBootLogo() is amended
to return the pointer to the GOP BLT buffer previously
registered with the SetBootLogo() service.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The updated Length value should be returned
for EFI_BUFFER_TOO_SMALL case.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit places the check for MediaId at the beginning of Block IO
services:
RamDiskBlkIoReadBlocks and
RamDiskBlkIoWriteBlocks
This aligns with the Block IO protocol implementations for other
devices.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Use UefiMultiPhase.h in Vfr.vfr instead of duplicating EFI_VARIABLE_*
definitions.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
Use BmpSupportLib to convert a GOP BLT Buffer to the BMP graphics
image that is published in an ACPI BGRT table.
* Remove use of IndustryStandard/Bmp.h include file
* Remove mBmpImageHeaderTemplate. This is handled by BmpSupportLib
* Clean up code style with function prototypes at top
and all module global variables together
* Update SetBootLogo() to use SafeIntLib to check input parameters
for overflows.
* Remove internal function BgrtAcpiTableChecksum(). Use
CalculateCheckSum8() directly from BgrtReadyToBootEventNotify()
* Remove InstallBootGraphicsResourceTable(). Move all the code into
BgrtReadyToBootEventNotify() that is signaled at ready to boot.
* Remove all logic that converts a GOP BLT buffer to a BMP graphics image
and use BmpSupportLib function TranslateGopBltToBmp() instead.
* Use AllocatePool() instead of AllocatePages() to allocate copy of
BMP image that is provided by BGRT. This is required to be compatible
with BmpSupportLib function TranslateGopBltToBmp() that uses
AllocatePool().
* Zero OemId in BGRT header before filling in value from PCD.
* Get size of PcdAcpiDefaultOemId and only copy the the size of the PCD
if it is smaller than the size of the OemId field in the BGRT header.
* Use WriteUnaligned24() instead of CopyMem() for the OemTableId field
of the BGRT header.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=802
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
The EsrtFmpDxe module is a lightweight version of the EsrtDxe
module that produces ESRT entries based only on FMP Protocol
instances.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
For a structure with a series of bit fields and used as a storage
in vfr file, and if the bit fields do not add up to the size of
the defined type.In the C code use sizeof() to get size of the
structure, the results may vary form the compiler(VS,GCC...).
But the size of the storage calculated by VfrCompiler is fixed
(calculate with alignment).To avoid the issue cased by above case,
we need to make the total width of the bit fields in the structure
aligned with the size of the defined type for these bit fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
This driver implements Reset2, ResetFilter and ResetHandler PPIs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The patch adds more debug message in ResetSystem().
It also removes unnecessary check of mResetNotifyDepth.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
V3:
a. Remove unused definitions
b. Get records size form the records buffer when getting size action
is triggered.
V2:
Update FirmwarePerformanceSmm to receive the address
of performance records instead of records content.
Receive buffer address of Boot performance records
which are reported by SmmCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V4:
Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
V3:Add handling for the case when performance feature is not enabled.
V2:
Update FirmwarePerformanceDxe to receive the address
of performance records instead of records content.
1. Remove the macro EXTENSION_RECORD_SIZE, since the extension
size can be got through PcdExtFpdtBootRecordPadSize.
2. Hook EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT to install ACPI table
3. Copy SMM record accord to the allocated size
4. Receive Boot performance table address instead of
contents which are reported DxeCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The call in ProbeMediaStatusEx() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
The similar fix was applied to ProbeMediaStatus in commit
df473cc1fc
* MdeModulePkg/PartitionDxe: Fix media probe
Somehow ProbeMediaStatusEx() wasn't changed together.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Jian J Wang <jian.j.wang@intel.com>
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
triggered by BootScriptExecutorDxe.
The root cause is that this driver will allocate memory of
EfiReservedMemoryType and relocate itself into this new memory. Since
EfiReservedMemoryType of memory is marked non-executable, re-start this
driver after relocation will cause exception. The fix is removing the NX
attribute after memory allocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This change is the additional fix of commit
14b351e2ed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update PCD driver to retrieve the default setting and set the initial
EFI variable when PcdSetNvStoreDefaultId is set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update HiiDataBase to retrieve the default setting and patch IFR data
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PEI may report the normal format variable storage HOB for the default
EFI variable. VariableDxe needs to support it and set them into NV variable
region.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch fixes a bug in Ip4ConfigProtocol, that new created IP interface is
not freed if Open ARP protocol failed.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Instance->Dhcp4Event is not necessary to be created in Ip4Config2InitInstance.
Because it will created in Ip4StartAutoConfig() later.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in MdeModulePkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
This patch updates the IP4 driver to use error status code instead of ASSERT
if failed to allocate memory buffer.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to resolve the issue reported @
https://bugzilla.tianocore.org/show_bug.cgi?id=804.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to discard the normal ICMP packets and recycle the received
ICMP data to avoid the memory leak.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When UEFI receives ICMP echo packets it will enter Ip4IcmpReplyEcho
function, and then call Ip4Output. However, if Ip4Output gets some
error and exits early, e.g. fails to find the route entry, memory
buffer of "Data" gets no chance to be freed and memory leak will be
caused. If there is such an attacker in the network, we will see UEFI
runs out of memory and system hangs.
So we explicitly free the memory when error status is returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Junbiao Hong <hongjunbiao@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In CheckRemainingSpaceForConsistencyInternal, one of the return paths leaves a loose
VA_COPY with no matching VA_END.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Sort and merge memory resource entries to handle the case that
the memory resource HOBs are reported differently between
BOOT_ON_FLASH_UPDATE boot mode and normal boot mode, and the
capsule buffer from UpdateCapsule at normal boot sits across
two memory resource descriptors at BOOT_ON_FLASH_UPDATE boot mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Tested-by: Dakota Chiang <dakota.chiang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=761
When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters. The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.
The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.
GEOMETRICSHAPE_UP_TRIANGLE '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE '>'
GEOMETRICSHAPE_DOWN_TRIANGLE 'v'
GEOMETRICSHAPE_LEFT_TRIANGLE '<'
ARROW_UP '^'
ARROW_DOWN 'v'
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".
Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
=> Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
=> Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
=> No more character so SerialPortPoll() will return FALSE and loop
until timeout
=> Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed
After some investigation, I found it is related to the Timeout value.
The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
2 * 1000000 / (UINTN) Mode->BaudRate;
}
For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8 + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).
When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
SerialIo->SetAttributes() ->
SerialSetAttributes() ->
SerialPortSetAttributes()
Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.
SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.
And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
According the UEFI spec 2.7 A:
In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
the default IPv4 address if it is not available yet."
In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these configurations
are retrieved from DHCP server or other auto-configuration mechanism."
This patch is to align with the above description. When the default IPv4
address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
Ip4Config2 protocol will be called to retrieve the default address by setting
the policy to Ip4Config2PolicyDhcp.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
VariableRuntimeDxe deletes and locks the MorLock variable in
MorLockInit(), with the argument that any protection provided by MorLock
can be circumvented if MorLock can be overwritten by unprivileged code
(i.e., outside of SMM).
Extend the argument and the logic to the MOR variable, which is supposed
to be protected by MorLock. Pass Attributes=0 when deleting MorLock and
MOR both.
This change was suggested by Star; it is inspired by earlier VariableSmm
commit fda8f631ed ("MdeModulePkg/Variable/RuntimeDxe: delete and lock
OS-created MOR variable", 2017-10-03).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to the TCG Platform Reset Attack Mitigation Specification (May
15, 2008):
> 5 Interface for UEFI
> 5.1 UEFI Variable
> 5.1.1 The MemoryOverwriteRequestControl
>
> Start of informative comment:
>
> [...] The OS loader should not create the variable. Rather, the firmware
> is required to create it and must support the semantics described here.
>
> End of informative comment.
However, some OS kernels create the MOR variable even if the platform
firmware does not support it (see one Bugzilla reference below). This OS
issue breaks the logic added in the last patch.
Strengthen the MOR check by searching for the TCG or TCG2 protocols, as
edk2's implementation of MOR depends on (one of) those protocols.
The protocols are defined under MdePkg, thus there's no inter-package
dependency issue. In addition, calling UEFI services in
MorLockInitAtEndOfDxe() is safe, due to the following order of events /
actions:
- platform BDS signals the EndOfDxe event group,
- the SMM core installs the SmmEndOfDxe protocol,
- MorLockInitAtEndOfDxe() is invoked, and it calls UEFI services,
- some time later, platform BDS installs the DxeSmmReadyToLock protocol,
- SMM / SMRAM is locked down and UEFI services become unavailable to SMM
drivers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1498159
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The "MemoryOverwriteRequestControl" (a.k.a. MOR) variable comes from the
"TCG Platform Reset Attack Mitigation Specification":
https://www.trustedcomputinggroup.org/wp-content/uploads/Platform-Reset-Attack-Mitigation-Specification.pdf
The "MemoryOverwriteRequestControlLock" variable (a.k.a. MORL) is a
Microsoft extension, called "Secure MOR implementation":
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/device-guard-requirements
Currently the VariableSmm driver creates MORL without regard to MOR. This
can lead to a situation where a platform does not support MOR from the
prerequisite spec (because it does not include the
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf" driver), but appears
to support MORL from the dependent Microsoft spec.
"winload.efi" notices this inconsistency, and disables the Device Guard
Virtualization Based Security in Windows Server 2016 and Windows 10 64-bit
Enterprise.
If the platform includes
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf", then MOR will exist
by the time EndOfDxe is reached, and VariableSmm can safely create MORL.
Otherwise, do not create MORL (delete it if it exists), and also prevent
other modules from creating it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=727
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1496170
Reported-by: Ladi Prosek <lprosek@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Liming Gao
Fu Siyuan
Ard Biesheuvel
cinnamon shia
Marvin.Haeuser@outlook.com
Ruiyu Ni
Thomas Palmer
Star Zeng
Dandan Bi
Laszlo Ersek
Jeff Brasen
Jiaxin Wu
Michael D Kinney
Hao Wu
Leif Lindholm
Bret Barkelew
Jian J Wang
Wang Fan
chenc2
Heyi Guo
Zenith432
Julien Grall
Paulo Alcantara
Song, BinX
Zhang, Chao B