REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Current reset vector uses 0xffffffe0 as AP waking vector, and expects
GenFv generates code aligned on a 4k boundary which will jump to this
location. However, some issues are listed below
1. GenFV doesn't generate code as the comment expects, because GenFv
assumes no modifications are required to the VTF-0 'Volume Top File'.
2. Even if removing VFT0 signature and let GenFv to modify, Genfv is
hard-code using another flash address 0xffffffd0.
3. In the same patch series, AP waking vector code is removed from
GenFv, because no such usage anymore. The existing of first two issues
also approve the usage is not available for a long time.
Therefore, remove AP waking vector related code.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The OvmfPkgX86 build reserves memory regions in MEMFD. The memory regions
get accessed in the SEC phase. AMD SEV-SNP require that the guest's
private memory be accepted or validated before access.
Introduce a Guided metadata structure that describes the reserved memory
regions. The VMM can locate the metadata structure by iterating through
the reset vector guid and process the areas based on the platform
specific requirements.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
Note: Intel TDX is only available on X64, so the Tdx related changes are
in X64 path. In IA32 path, there may be null stub to make the build
success.
This patch includes below major changes.
1. Ia32/IntelTdx.asm
IntelTdx.asm includes below routines used in ResetVector
- IsTdx
Check if the running system is Tdx guest.
- InitTdxWorkarea
It initialize the TDX_WORK_AREA. Because it is called by both BSP and
APs and to avoid the race condition, only BSP can initialize the
WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
is set.
- ReloadFlat32
After reset all CPUs in TDX are initialized to 32-bit protected mode.
But GDT register is not set. So this routine loads the GDT then jump
to Flat 32 protected mode again.
- InitTdx
This routine wrap above 3 routines together to do Tdx initialization
in ResetVector phase.
- IsTdxEnabled
It is a OneTimeCall to probe if TDX is enabled by checking the
CC_WORK_AREA.
- CheckTdxFeaturesBeforeBuildPagetables
This routine is called to check if it is Non-TDX guest, TDX-Bsp or
TDX-APs. Because in TDX guest all the initialization is done by BSP
(including the page tables). APs should not build the tables.
- TdxPostBuildPageTables
It is called after Page Tables are built by BSP.
byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
leave spin and go.
2. Ia32/PageTables64.asm
As described above only the TDX BSP build the page tables. So
PageTables64.asm is updated to make sure only TDX BSP build the
PageTables. TDX APs will skip the page table building and set Cr3
directly.
3. Ia16/ResetVectorVtf0.asm
In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
descriptor (paging disabled). But in Non-Td guest the initial state of
CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
real mode, then jump to the corresponding entry point.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX when host VMM creates a new guest TD, some initial set of
TD-private pages are added using the TDH.MEM.PAGE.ADD function. These
pages typically contain Virtual BIOS code and data along with some clear
pages for stacks and heap. In the meanwhile, some configuration data
need be measured by host VMM. Tdx Metadata is designed for this purpose
to indicate host VMM how to do the above tasks.
More detailed information of Metadata is in [TDVF] Section 11.
Tdx Metadata describes the information about the image for VMM use.
For example, the base address and length of the TdHob, Bfv, Cfv, etc.
The offset of the Metadata is stored in a GUID-ed structure which is
appended in the GUID-ed chain from a fixed GPA (0xffffffd0).
In this commit there are 2 new definitions of BFV & CFV.
Tdx Virtual Firmware (TDVF) includes one Firmware Volume (FV) known
as the Boot Firmware Volume (BFV). The FV format is defined in the
UEFI Platform Initialization (PI) spec. BFV includes all TDVF
components required during boot.
TDVF also include a configuration firmware volume (CFV) that is
separated from the BFV. The reason is because the CFV is measured in
RTMR, while the BFV is measured in MRTD.
In practice BFV is the code part of Ovmf image (OVMF_CODE.fd). CFV is
the vars part of Ovmf image (OVMF_VARS.fd).
Since AMD SEV has already defined some SEV specific memory region in
MEMFD. TDX re-uses some of the memory regions defined by SEV.
- MailBox : PcdOvmfSecGhcbBackupBase|PcdOvmfSecGhcbBackupSize
- TdHob : PcdOvmfSecGhcbBase|PcdOvmfSecGhcbSize
[TDVF] https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Split the existing 4KB page reserved for SEV launch secrets into two
parts: first 3KB for SEV launch secrets and last 1KB for firmware
config hashes.
The area of the firmware config hashes will be attested (measured) by
the PSP and thus the untrusted VMM can't pass in different files from
what the guest owner allows.
Declare this in the Reset Vector table using GUID
7255371f-3a3b-4b04-927b-1da6efa8d454 and a uint32_t table of a base
and size value (similar to the structure used to declare the launch
secret block).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Co-developed-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
SEV needs an area to place an injected secret where OVMF can find it
and pass it up as a ConfigurationTable. This patch implements the
area itself as an addition to the SEV enhanced reset vector table using
an additional guid (4c2eb361-7d9b-4cc3-8081-127c90d3d294).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201130202819.3910-5-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: fix typo in "ResetVectorVtf0.asm" comments]
Convert the current ES reset block structure to an extensible guid
based structure by appending a header and length, which allow for
multiple guid based data packets to be inserted.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201130202819.3910-2-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guest's register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead an SEV-ES AP must be
re-directed from within the guest to the actual requested staring location
as specified in the INIT-SIPI-SIPI sequence.
Use the SEV-ES work area for the reset vector code that contains support
to jump to the desired RIP location after having been started. This is
required for only the very first AP reset.
This new OVMF source file, ResetVectorVtf0.asm, is used in place of the
original file through the use of the include path order set in
OvmfPkg/ResetVector/ResetVector.inf under "[BuildOptions]".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
In some environments, the accessed bit should be set to allow the
global descriptor table (GDT) to reside in unmodifiable flash
memory.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9675 6f19259b-4bc3-4df7-8a09-765794883524
Previously it was:
ESI/RSI - SEC Core entry point
EDI/RDI - PEI Core entry point
EBP/RBP - Start of BFV
Now it is:
RAX/EAX Initial value of the EAX register
(BIST: Built-in Self Test)
DI 'BP': boot-strap processor, or
'AP': application processor
RBP/EBP Address of Boot Firmware Volume (BFV)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9571 6f19259b-4bc3-4df7-8a09-765794883524
Zhiguang Liu
Brijesh Singh via groups.io
Min Xu
James Bottomley
Tom Lendacky
geekboy15a
jljusten