https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2265
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1801
Add a PCD for skipping password prompt in device unlocked status.
Previous change only support if storage device is in locked status.
This change is added to support the case that security status of the
storage device is unlocked.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
After change behavior to send BlockSid command at EndOfDxe point,
check device ownership command will return un-authority error, it
finally caused opal driver can't show "Enable Feature" menu.
Update the code logic to send detect device ownership command
before send BlockSID command.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
Change Send BlockSID command time from ReadyToBoot to
EndOfDxe.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1753
Add pop-up warning messages before secure erase action.
In order to notify user the secure erase action will take a longer time.
This change also fix some pop-up windows are unable to show up
complete message due to some strings are too long.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1503
A pointer variable should be checked if it is NULL or Valid before
using it.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1506
Updated some descriptions on SETUP page to avoid user confusion.
Currently it shows "1.0 UEFI Opal Driver", however it may be mislead user to think
it is only for Opal drive but not for Pyrite drive.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1484
Add a PCD for skipping password prompt and device unlock flow.
so that other pre-OS applications are able to take over Opal
devices unlock flow.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1421
"revert action will take long time..." warning should be removed
from pop up message when keep user data selected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When user input error password exceed the max allowed times, opal device
will return Invalid type error code even user input the correct password.
In this case, opal driver needs to force user shutdown the system before
let user input new password.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
For no warning message when do the PSID revert action, the
message in the popup dialog is not enough. The error use
of NULL for CreatePopUp function caused this regression.
This change fixed it.
Passed Unit Test:
1. Check PSID revert with/without warning message cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Current code uses string length as BufferSize input to UnicodeSPrint,
it is wrong and makes the pop up string trimmed. The BufferSize input
to UnicodeSPrint should be the size, in bytes, of the output buffer.
This is to use sizeof (mPopUpString) as the BufferSize input to
UnicodeSPrint, it also updates array size of mPopUpString from 256 to
100 that is enough, otherwise the pop up string may be too long.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Go to next loop instead of going to unlock OPAL password when
AhciModeInitialize is failed.
It is just error handling.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Return directly if no any device in EndOfDxe notification.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Chu, Maggie
Sean Brogan
Chu, Maggie
Joe Richey
Eric Dong
Michael D Kinney
Hao Wu
Chen A Chen
Liming Gao
Star Zeng