Add a driver for the virtio serial device.
The virtio serial device also known as virtio console device because
initially it had only support for a single tty, intended to be used as
console. Support for multiple streams and named data ports has been
added later on.
The driver supports tty ports only, they are registered as SerialIo
UART in the system.
Named ports are detected and logged, but not exposed as devices. They
are usually used by guest agents to communicate with the host. It's not
clear whenever it makes sense for the firmware to run such agents and if
so which efi protocol could be to expose the ports. So leaving that for
another day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add header files with structs and defines for the virtio serial device.
The virtio serial device also known as virtio console device because
initially it had only support for a single tty, intended to be used as
console. Support for multiple streams and named data ports has been
added later on.
https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2900003
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initialize gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString with
with the value of the variable "FIRMWARE_VER", if is is defined. Applies
to all flavors of OvmfPkg.
This behavior is already implemented in ArmVirtXen.dsc. It allows
specifying the firmware version string on the build command line with
-D FIRMARE_VER=...
Introduce a common include file to be used in the .dsc files for the
different OVMF flavors, and add the changes there. (ArmVirtPkg already
has such a file).
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Currently OVMF tries to rely on the base size advertised via the CPUID
table entries corresponding to leaf 0xD, sub-leafs 0x0/0x1. This will
generally work for KVM guests, but might not for other SEV-SNP
hypervisor implementations. Make the handling more robust by simply
using the base area size documented by the APM.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
CPUID leaf 0xD sub-leafs 0x0 and 0x1 contain cumulative sizes for the
enabled XSave areas. Those sizes are calculated by tallying up all the
other sub-leafs that contain per-area size information for XSave areas
that are currently enabled in XCr0/XSS. The current check has the logic
inverted. Fix that.
This doesn't seem to cause problems currently, but could in the future
if OVMF made more extensive use of XSave areas. It was noticed while
implementing SNP-related tests for KVM Unit Tests, which re-uses the
OVMF #VC handler in some cases.
Reported-by: Pavan Kumar Paluri <papaluri@amd.com>
Cc: Pavan Kumar Paluri <papaluri@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The Confidential Computing blob defined here is intended to match the
definition defined by linux guest kernel. Previously, both definitions
relied on natural alignment, but that relies on both OVMF and kernel
being compiled as 64-bit. While there aren't currently any plans to
enable SNP support for 32-bit compilations, the kernel definition has
since been updated to use explicit padding/reserved fields to avoid
this dependency. Update OVMF to match that definition.
While at it, also fix up the Reserved fields to match the numbering
used in the kernel.
No functional changes (for currently-supported environments, at least).
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The SEV-SNP Confidential Computing blob contains metadata that should
remain accessible for the life of the guest. Allocate it as
EfiACPIReclaimMemory to ensure the memory isn't overwritten by the guest
operating system later.
Reported-by: Dov Murik <dovmurik@linux.ibm.com>
Suggested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
OvmfPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
The generic and XCODE5 versions of this library are now identical, so
drop the special case. The library will be removed entirely in a
subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
This patch substitutes the macros that were renamed in the second
patch with the new, shared alignment macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
This patch is a preparation for the patches that follow. The
subsequent patches will introduce and integrate new alignment-related
macros, which collide with existing definitions in OvmfPkg.
Temporarily rename them to avoid build failure, till they can be
substituted with the new, shared definitions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
This is causing excessive boot times in the VS2019 IA32/X64 Full
run to shell tasks (> 2 minutes) and blocking all edk2 CI.
This patch removes the change so it can be root caused separately
without blocking other patches unrelated to OVMF.
Reverts f92a9dce10
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
The CLANGDWARF toolchain has the same problem as XCODE5 linking
CpuExceptionHandlerLib. So, use the
Xcode5SecPeiCpuExceptionHandlerLib.inf when building with the CLANGDWARF
toolchain.
Since the difference is that the non-Xcode5 version uses `mov` while the
Xcode5 version uses `lea`, they can be merged in future with the single
version using `lea`.
[ardb: the main difference is that the 'mov' instructions result in
absolute symbol references, which are necessary because the code
in question is copied in memory independently from the code that
carries the symbols it refers to. The Xcode5 version has
additional runtime handling to fix up the copied code with the
correct absolute references.]
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Replace the static struct initialization with a call to ZeroMem to avoid
generating a call to memset in certain build configurations.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
With the new mmconfig location at 0xe0000000 above the 32-bit PCI MMIO
window we don't have to special-case the mmconfig xbar any more. We'll
just add a mtrr uncachable entry starting at MMIO window base and ending
at 4GB.
Update comments to match reality.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Also swap the ordering of 32bit PCI MMIO window on q35, i.e. use the
room between end of low memory and the start of the mmconfig bar.
With a typical configuration on modern qemu with gigabyte-aligned memory
the MMIO window start at 0x8000000, sized 1532 MB. In case there is
memory present above 0x80000000 the window will start at 0xc0000000
instead, with 512 MB size.
This depends on qemu commit 4a4418369d6d ("q35: fix mmconfig and
PCI0._CRS"), so it raises the bar for the lowest supported version
to qemu 4.1 (released Aug 2019).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Move the commment up so it is placed just before the address space
calculations start. Also add q35 memory layout.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
M-mode firmware ranges should not be used by EDK2/OS.
Currently, we search for mmode_resv0 node in FDT and mark it as the
reserved memory in EFI memory map. However, if there are multiple
M-mode firmware ranges, then this will miss those extra ranges
allowing the OS to access the memory and hit a fault.
This issue is exposed since recent opensbi started creating
two ranges for text and data.
Fix this by searching for all reserved memory nodes and marking
them as reserved in the EFI memory map.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Time to leave behind relics from the last century and arrive in the
modern world. Drop PC-ANSI Terminal Type for the serial console, use
UTF-8 instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for building RiscVVirtQemu platform in CI.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
In case PcdFirmwareReleaseDateString is not set use a valid date
as fallback. Using "unknown" makes Windows unhappy.
Fixes: 4cb94f20b0 ("OvmfPkg/SmbiosPlatformDxe: use PcdFirmware*")
Reported-by: ruifeng.gao@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested with a PCIe pass-thru'd AHCI controller.
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4337
This patch is to check SmBase relocation supported or not.
If gSmmBaseHobGuid found, means SmBase info has been relocated
and recorded in the SmBase array. ASSERT it's not supported in OVMF.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4350
Currently, stack HOB is not created for the stack memory. This causes
stack memory to be treated as free memory and any memory allocation which
happens at this address causes random memory corruption. Fix this by
creating the stack HOB which marks the memory as BS data.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Andrei Warkentin <andrei.warkentin@intel.com>
Tested-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Fix the UEFI memory range calculation by including the correct
stack memory range. Without this fix, SCT hangs in MemoryAllocation
test cases which call AllocateAddress().
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add infrastructure files to build edk2 for RISC-V qemu virt machine.
- It follows PEI less design.
- EDK2 for qemu virt is booted in S-mode as a payload for M-mode FW
- Leveraged from ArmVirtQemu
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Add the SEC module for RISC-V Qemu virt machine support.
It uses the PEI less design.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add PciCpuIo2Dxe driver to implement EFI_CPU_IO2_PROTOCOL
to add the translation for IO access. This is copied from
ArmPciCpuIo2Dxe driver.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Qemu NOR flash driver needs this library. Add this
library for RISC-V leveraged from SbsaQemu.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
RISC-V Qemu virt uses SBI calls to implement the reset.
Add the base class library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
RISC-V Qemu Virt platfform needs the PlatformBootManagerLib similar
to the one in ArmVirtPlatform. Add the library in OvmfPkg/RiscVVirt
leveraging the one from Arm.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This module is required by other architectures like RISC-V.
Hence, move this to OvmfPkg.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
This event should only trigger once. It should be idempotent, but the
allocation of the memory map itself is observable and can cause
ExitBootServices to fail with a modified map key.
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The hard-coded attributes for the re-added memory space should instead
forward the replaced descriptor's capabilities.
Tested on Linux with efi=debug. Prior to this change, an 8GiB VM running
a kernel without unaccepted memory support shows this entry
efi: mem94: [Conventional| | |CC| | | | | | | | | | | ]
range=[0x0000000100000000-0x000000023fffffff] (5120MB)
This does not have the cache capabilities one would expect for system
memory, UC|WC|WT|WB.
After this change, the same entry becomes
efi: mem94: [Conventional| | |CC| | | | | | | |WB|WT|WC|UC]
range=[0x0000000100000000-0x000000023fffffff] (5120MB)
This has all the expected attributes.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
[ardb: drop the EFI_MEMORY_CPU_CRYPTO flag - it isn't used anywhere else
in EDK2 or Linux so it doesn't actually do anything, and it is
unclear whether it is intended for use by the guest in the first
place]
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Allow users to build OVMF then run QEMU by moving the build block above
the run block and removing the exit line.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
TDVF's README is updated based on the latest feature.
- RTMR based measurement is supported in OvmfPkgX64 (Config-A)
- Features of Config-B have all been implemented, such as removing
unnecessary attack surfaces.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2506
In all DSC files that define SECURE_BOOT_ENABLE, opt-in into requiring
self-signed PK when SECURE_BOOT_ENABLE is TRUE.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Jan Bobek <jbobek@nvidia.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
This patch enables Tdx measurement in OvmfPkgX64 with below changes:
1) CC_MEASUREMENT_ENABLE is introduced in OvmfPkgX64.dsc. This flag
indicates if Intel TDX measurement is enabled in OvmfPkgX64. Its
default value is FALSE.
2) Include TdTcg2Dxe in OvmfPkgX64 so that CC_MEASUREMENT_PROTOCOL
is installed in a Td-guest. TdTcg2Dxe is controlled by
TDX_MEASUREMENT_ENABLE because it is only valid when Intel TDX
measurement is enabled.
3) OvmfTpmLibs.dsc.inc and OvmfTpmSecurityStub.dsc.inc are updated
because DxeTpm2MeasureBootLib.inf and DxeTpmMeasurementLib.inf
should be included to support CC_MEASUREMENT_PROTOCOL.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
TdxHelperBuildGuidHobForTdxMeasurement is called in PlatformPei to build
GuidHob for Tdx measurement.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
TdHob and Configuration FV (Cfv) are external inputs from VMM. From the
security perspective, they should be measured before they're consumed.
This patch measures TdHob and Cfv and stores the measurement values in
WorkArea.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
TdxHelperLib provides below helper functions for a td-guest.
- TdxHelperProcessTdHob
- TdxHelperMeasureTdHob
- TdxHelperMeasureCfvImage
- TdxHelperBuildGuidHobForTdxMeasurement
PeiTdxHelperLib is the PEI instance of TdxHelperLib. It implements 1
function for tdx in PEI phase. Other functions are not supported in
PEI phase.
- TdxHelperBuildGuidHobForTdxMeasurement builds GuidHob for tdx
measurement in PEI phase.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
TdHob and Configuration FV (Cfv) are external inputs from VMM. From the
security perspective, they should be measured before they're consumed.
This patch measures TdHob and Cfv and stores the measurement values in
WorkArea.
After TdHob and Configuration FV (Cfv) are measured in SecMain, the
same measurements in PeilessStartupLib are deleted.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
ProcessHobList once was implemented in PlatformInitLib and it walks thru
TdHob list and accept un-accepted memories.
This patch moves the codes to SecTdxHelperLib and rename ProcessHobList
as TdxHelperProcessTdHob
After TdxHelperProcessTdHob is introduced, below changes are applied:
- Call TdxHelperProcessTdHob instead of ProcessHobList in SecMain.c
(in both OvmfPkgX64/Sec and IntelTdx/Sec).
- Delete the duplicated codes in PlatformInitLib
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Gerd Hoffmann
Oliver Steffen
Roth, Michael via groups.io
Michael Roth
Jeff Brasen
Rebecca Cran
Ard Biesheuvel
Michael Kubacki
Sunil V L
Yu Pu
Zhiguang Liu
Andrei Warkentin
Yuanhao Xie
Wu, Jiaxin
Dionna Glaze
Rebecca Cran
Min M Xu
Jan Bobek