Commit Graph

196 Commits

Author SHA1 Message Date
Ard Biesheuvel b89919ee8f BaseTools AARCH64: override XIP module linker alignment to 32 bytes
Now that GenFw converts small code model ADRP instructions to ADR on
the fly, we can reduce the alignment for XIP modules, where large
alignment values may cause considerable waste of flash space due to
excessive padding. This limits the module size to 1 MB, but this is
not a concern in practice.

So set the XIP section alignment to 0x20 for DEBUG_GCC49, DEBUG_GCC5
and *_CLANG35, all of which use the small code model.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2016-08-02 10:58:25 +02:00
Ard Biesheuvel 4a8466d4ba BaseTools GCC: introduce GCC5 toolchain to support GCC v5.x in LTO mode
This adds support for GCC 5.x in LTO mode for IA32, X64, ARM and
AARCH64. Due to the fact that the GCC project switched to a new
numbering scheme where the first digit is now incremented for every
major release, the new toolchain is simply called 'GCC5', and is
intended to support all GCC v5.x releases.

Since IA32 and X64 enable compiler optimizations (-Os) for both DEBUG
and RELEASE builds, LTO support is equally enabled for both targets.
On ARM and AARCH64, DEBUG builds are not optimized, and so the LTO
optimizations are only enabled for RELEASE.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-08-02 10:54:11 +02:00
Ard Biesheuvel a1b8baccc3 BaseTools GCC: use 'gcc' as the linker command for GCC44 and later
To accommodate upcoming GCCx toolchain versions that require 'gcc' to
be used as the linker in order to support LTO, switch GCC44 and later
(including CLANG35) to a new DLINK build rule that invokes 'gcc' as the
linker instead of 'ld'. Since gcc expects its command line arguments in
a different format, and expects arguments that it needs to pass to the
linker to be prefixed with '-Wl,', this involves changes to most of the
DLINK_FLAGS definitions in tools_def.template, as well as some changes to
module .INF files that set their own linker options.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-08-02 08:40:43 +02:00
Ard Biesheuvel befb3ba515 BaseTools UNIXGCC ELFGCC CYGGCC: clone GCC build rule family into GCCLD
Before we can make non-backward compatible changes to the GCC build rules
regarding the use of the 'gcc' binary as the linker, clone the existing
GCC build rules into a 'GCCLD' build rule family, and move the legacy
toolchains UNIXGCC, CYGGCC, CYGGCCxASL and ELFGCC over to it.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-08-02 08:40:31 +02:00
Ard Biesheuvel 1c63516075 BaseTools CLANG35: drop problematic use-movt and save-temps options
Some versions of Clang fail on every input file when using the
-save-temps options, and produces the following heplful error message:

  <unknown>:0: error: Undefined temporary symbol

Simply dropping the option for CLANG35 is the simplest way around this,
since the value of storing .i and .s files is dubious anyway.

Also, drop the arm-use-movt option, which does not appear to be
supported anymore by recent versions of clang.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
2016-08-02 08:21:46 +02:00
Ard Biesheuvel f49513f666 BaseTools/tools_def: switch GCC/X64 to the PIE small model
The ordinary small code model for x86_64 cannot be used in UEFI, since
it assumes the executable is loaded in the first 2 GB of memory.
Therefore, we use the large model instead, which can execute anywhere,
but uses absolute 64-bit wide quantities for all symbol references,
which is costly in terms of code size.

So switch to the PIE small code model, this uses 32-bit relative
references where possible, but does not make any assumptions about the
load address (i.e., all absolute symbol references are 64-bits wide).
Note that, due to the 'protected' visibility pragma introduced in an
earlier patch, there is no need for the EDK2 build system to deal with
GOT related ELF relocation types.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-07-21 13:32:09 +02:00
Ard Biesheuvel 247093f45d BaseTools/tools_def: enable Os optimization for GCC X64 builds
Now that we switched to the __builtin_ms_va_list VA_LIST type for
GCC/X64, we can trust the compiler to do the right thing even under
optimization, and so we can enable -Os optimization all the way back
to GCC44, and drop the -D define that prevents the use of the __builtin
VA_LIST types. Note that this requires the -maccumulate-outgoing-args
switch as well.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-07-21 13:32:09 +02:00
Laszlo Ersek 9c4dbdff1d BaseTools/tools_def.template: bump minimum required NASM versions
NASM had been unable to assemble segment register operations before the
following git commit:

  http://repo.or.cz/nasm.git/commitdiff/21d4ccc3c338

That commit was first released in NASM 2.10:

  http://repo.or.cz/nasm.git/commitdiff/ff62f33da0a2

This makes NASM 2.07 unusable for edk2 in general, because now we have a
lot of X64 assembly code that works with segment registers. For example
in:

  UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ExceptionHandlerAsm.nasm

Bump the minimum required version to 2.10, for use with GCC toolchains.

Furthermore, list NASM 2.12.01 as a requirement for all other toolchains.
In particular, for source level debugging, VS20xx requires CodeView 8
debug symbols, and only NASM 2.12.01 and later produce those. (Suggested
by Liming, Mike, and Andrew.)

Cc: Andrew Fish <afish@apple.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/14612
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-07-18 19:22:58 +02:00
Leif Lindholm 3f7f287178 BaseTools: use unsigned chars on ARM architectures
By default, the ARM architectures have unsigned chars, whereas the other
architectures supported by EDK2 by default have signed chars.
However, EDK2 uses -funsigned-chars on those architectures to change the
default behaviour.

Unfortunately, the ARM architectures explicitly break their default
behaviour by specifying -fsigned-chars (I presume in a pre-emptive
attempt at avoiding incompatibility).

Since this situation is already confusing enough, switch the ARM
architectures to also specify -funsigned-chars explicitly rather than
just dropping the current parameter.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-04-12 13:19:38 +08:00
Cinnamon Shia 716132efb1 BaseTools: Remove /Oi from Visual Studio tool chains.
Remove /Oi from Visual Studio tool chains. because of the following reasons:
1. Intrinsic is Compiler-dependent.
2. Adding /Oi (Generate Intrinsic Functions) doesn't promise 100% replacing
   the function call with inline functions.
   /Oi is only a request, but doesn't force, the compilers to use the intrinsic.
   The visual studio optimizer can still use the library version.
3. Since EDK2 doesn't include Visual Studio header files, intrinsic function
   should not be used.

Built Nt32Pkg, OvmfPkg, ShellPkg, MdeModulePkg and CryptoPkg successfully.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
2016-04-08 11:23:27 +08:00
Ard Biesheuvel f37d891c1b BaseTools AARCH64: move DEBUG GCC49 to the small code model
When building AARCH64 platforms that include a Shell binary built from
source, we run into trouble when using the tiny code model for DEBUG
builds. The reason is that the Shell binary built in DEBUG mode exceeds
the 1 MB range of the ADR instruction, so anything that gets pulled into
the final link of the Shell binary either needs to be built with the small
or large model, or needs to be sorted in some way to put the ADR references
close to their targets.

Since code size is not a big concern for DEBUG builds anyway, let's move
to the small code model for all modules when using DEBUG GCC49. This way,
there is no need for workarounds that are specific to UEFI_APPLICATION
modules in general, or the Shell application in particular.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2016-03-25 12:37:47 +01:00
Ard Biesheuvel 20d00edf21 BaseTools/GCC: set -Wno-unused-but-set-variables only on RELEASE builds
This aligns the GCC definitions for 4.6 and up to align with the ARM and
AARCH64 definitions, which is to ignore unused but set variables only on
RELEASE builds. This allows us to find instances of unused variables that
are left behind after refactoring. It also allows us to find bad new code,
which, due to the EDK2 coding style which disallows initialized automatic
variables, may contain such variables without having been noticed by other
toolchains.

(Slightly edited) observation from Jordan Justen
<jordan.l.justen@intel.com>: RELEASE builds must keep the flag because
debug code (such as assertions) may collapse to nothing -- e.g. if a
platform defines MDEPKG_NDEBUG for RELEASE -- and therefore trigger the
warning.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
[lersek@redhat.com: incorporate commit message update from Jordan]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2016-03-25 10:53:02 +01:00
Michael Kinney c261c27dce BaseTools/tools_def.txt: Add -march=i586 for IA32 GCC targets
Newer GCC compilers use a default of march higher than i586
for -m32 (IA32 configuration) and this is causing generation of
instructions that are not compatible with all IA32 targets.
Specically Galileo platform support in the QuarkPlatformPkg does
not boot if GCC48 or higher is used.

This is similar to the following checkin that was done to address
this same issue for VS2012 and higher tool chains:

SHA-1: 71028ba2c4

Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leroy Leahy <leroy.p.leahy@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
2016-02-24 20:28:07 -08:00
Ard Biesheuvel d764d59849 BaseTools AARCH64: build XIP modules with strict alignment
GCC for AARCH64 recognizes byte swapping load and store sequences
and may replace them with wider loads or stores combined with rev
instructions. In some cases (i.e., with GCC version 5 and later)
this may result in unaligned accesses, which are not allowed before
we turn the MMU on.

So build any modules or static libraries that may execute with the MMU
off with -mstrict-align. Other modules don't need this switch, so we
can remove it from the CLANG35/AARCH64 common CC flags.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19638 6f19259b-4bc3-4df7-8a09-765794883524
2016-01-11 08:50:49 +00:00
Ard Biesheuvel c2a892d7c8 BaseTools CLANG35: use -target in PP flags as well
The Clang preprocessor may rely on builtin defines that are target
dependent, so we should add the -target argument also when invoking
the preprocessor directly.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19584 6f19259b-4bc3-4df7-8a09-765794883524
2016-01-04 09:31:42 +00:00
Ard Biesheuvel d4dcd5542a BaseTools CLANG35: use linux-gnu target triplets explicitly
Since we are combining Clang with the GNU linker, make that explicit in
the target triplet. This affects certain builtin defines and other compiler
behavior that may be unspecified otherwise.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19583 6f19259b-4bc3-4df7-8a09-765794883524
2016-01-04 09:31:33 +00:00
Ard Biesheuvel b9f7890c47 BaseTools ARM: add CLANG35 support
This extends the existing CLANG35 toolchain definition with support for
building for the ARM architecture. In order to be able to reuse the existing
ARM GCC definitions as much as possible, the following changes have been
made to the existing ARM GCC support:
- the -mapcs option has been removed; it is a no-op under Thumb (our default)
  and we use AAPCS (-mabi=aapcs) anyway
- the -mword-relocations option has been moved from GCC_ARM_CC_FLAGS to
  the GCC4x specific option: CLANG does not support it, and uses '-mllvm
  -marm-use-movt=0' instead.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19284 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-15 15:02:24 +00:00
Ard Biesheuvel b12ef6b964 BaseTools RVCT: use scatter file to enforce minimum section alignment
Up until SVN r18540, GenFw created invalid PE/COFF binaries for the ARM
architecture, by allowing PE/COFF .data sections to appear at offsets
that were not aligned to the global PE/COFF section alignment. The
reason for this was that the relocation metadata emitted by RVCT's
armlink only contains dynamic absolute relocations, so it is impossible
to recalculate relative relocations between .text and .data, and so the
relative offset between the two needs to be preserved.

Since r18540, we do align .data to the PE/COFF section alignment,
resulting in potentially corrupt PE/COFF binaries unless .data happens
to appear at a 32-byte aligned offset. So let's introduce a RVCT scatter
file that sets this alignment for the ELF .data section (and subsequent
.bss section).

At the same time, set the start offset to 0x220 bytes (which is the size
of our 32-bit PE/COFF header) so that the memory layouts are identical
between ELF and PE/COFF. Also add a 4 KB aligned version that can be
used to build DXE_RUNTIME_DRIVER modules with runtime memory protection
enabled.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19235 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-14 07:55:46 +00:00
Ard Biesheuvel 214a3b7941 BaseTools GCC: avoid the use of COMMON symbols
The default behavior of the GCC compiler is to emit uninitialized globals
with external linkage into a COMMON section, where duplicate definitions
are merged. This may result in unexpected behavior, since global variables
defined under the same name in different C files may not refer to the same
logical data item.

For instance, the definitions of EFI_EVENT mVirtualAddressChangeEvent that
[used to] appear in the following files:

  CryptoPkg/Library/BaseCryptLib/SysCall/RuntimeMemAllocation.c
  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c

will be folded into a single instance of the variable when the latter
module includes the former library, which can lead to unexpected results.

Even if some may argue that there are legal uses for COMMON allocation, the
high modularity of EDK2 combined with the low level of awareness of the
intracicies surrounding common allocation and the generally poor EDK2
developer discipline regarding the use of the STATIC keyword* make a strong
case for disabling it by default, and re-enabling it explicitly for packages
that depend on it.

So prevent GCC from emitting variables into the COMMON section, by passing
-fno-common to the compiler, and discarding the section in the GNU ld linker
script.

* Any function or variable that is only referenced from the translation unit
  that defines it could be made STATIC. This does not only prevent issues
  like the above, it also allows the compiler to generate better code, e.g.,
  drop out of line function definitions after inlining all invocations or
  perform constant propagation on variables.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19164 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-08 07:40:12 +00:00
Wang Yu 5d9cd24ede BaseTools: Add VS2015 tool chain in tools_def.template
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Yu <yu.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19101 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-03 03:19:01 +00:00
Eugene Cohen 8e18fbd70d BaseTools RVCT: add preprocessor preinclude for AutoGen.h
Ensure that AutoGen.h is force-included when the RVCT preprocessor
is invoked.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19097 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-02 16:11:33 +00:00
Ard Biesheuvel 67b3c0f958 BaseTools GCC: move PECOFF_HEADER_SIZE definition before LD script
Older versions of binutils need all symbols to be defined when consuming
the linker script passed via the command line. So move the definition
'--defsym=PECOFF_HEADER_SIZE=...' before the '--script=...' command line
argument.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18747 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-09 08:39:28 +00:00
Ard Biesheuvel 63e1c23b22 BaseTools/AARCH64: use large code model for GCC <= 4.8
As it turns out, upstream GCC only supports the AArch64 'tiny' code
model as of version 4.9. Since the default 'small' code model requires
4 KB section alignment (which is undesirable for the XIP modules),
revert GCC 4.7 and 4.8 to using the 'large' code model instead.

Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18569 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-02 14:48:30 +00:00
Ard Biesheuvel 64a63d6942 BaseTools/ARM: move to unified GCC linker script
Instead of using the ARM builtin linker script for GNU ld, use the
new unified one instead. This will allow us to increase the section
alignment for DXE_RUNTIME_MODULEs, which is a prerequisite for
enabling the UEFIv2.5 Properties Table memory protection feature.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18565 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-01 14:01:07 +00:00
Ard Biesheuvel 0bd0d6dff6 BaseTools/GenFw: disable RVCT linker size optimization
Disable the RVCT size optimization that may put sections at an offset
that is not aligned to their own alignment, by adding the --no_legacyalign
switch to the RVCT linker command line. This is necessary since such sections
cannot be correctly converted into PE/COFF sections without padding them at
the front, which defeats the purpose of the optimization anyway.

With the optimization gone, we can also remove the special case for ARM in
GenFw that could result in corrupt PE/COFF images to be emitted. Instead,
sections whose base address is not aligned correctly are outright rejected.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18540 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-24 19:35:16 +00:00
Ard Biesheuvel 06cd723125 BaseTools AARCH64: use tiny code model by default
The AARCH64 tiny code model produces more efficient code, since it
uses relative symbol references rather than absolute references, i.e.,
an emitted relative reference refers to the symbol directly rather
than a literal containing its 64-bit absolute address. This saves
space in the binary, and reduces the number of relocation fixups that
need to be applied by the PE/COFF loader.

So now that we support relative relocations in GenFw, move to the
tiny code model by default. Note that the large model can still be
selected by individual modules by adding -mcmodel=large to the
appropriate CC_FLAGS.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18242 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-20 06:39:12 +00:00
Liming Gao 71028ba2c4 BaseTools: Add /arch:IA32 option in VS2012 and VS2013
VS2012 and VS2013 turn on optimizations by default that generate the
use of CMOV instruction. This is a change from previous version VS2008.
This means when you build with VS2012 or VS2013, it will generate UD
exceptions on Quark.

To resolve it, add /arch:IA32 options to not use enhanced instructions.
https://msdn.microsoft.com/en-us/library/7t5yh4fd(v=vs.140).aspx

Update the default options of VS2012 & VS2013 tool chain IA32 arch in
BaseTools\Conf\tools_def.template to make sure the generated Quark
compatibility driver.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18230 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-18 02:52:32 +00:00
Ard Biesheuvel 70bd69912a BaseTools GCC: prevent unaligned memory accesses on ARM GCC 4.6
In GCC 4.7, a feature was added to the ARM backend that allows
unaligned loads and stores to be emitted. Since it is enabled by
default on ARMv6 and later CPUs, and since such code is not suitable
in our case (i.e., bare metal code), we must disable it by passing the
-mno-unaligned-access option if we are using GCC 4.7 or later.

However, this particular feature and its enabling by default have been
backported to version 4.6 by Linaro. Since the Linaro toolchains are
widely used for ARM development, and also shipped by distros such as
Ubuntu, we should disable the feature on version 4.6 as well.
Unfortunately, since the upstream version does not support the feature,
it also does not understand the -mno-unaligned-access option.

Since GCC sets the builtin #define __ARM_FEATURE_UNALIGNED to 1 when
-munaligned-access is in effect, we can force the build to fail in this
case by passing -D__ARM_FEATURE_UNALIGNED=0 on the GCC command line.

This will produce the following error message:

  <command-line>:0:0: error: "__ARM_FEATURE_UNALIGNED" redefined [-Werror]
  <built-in>:0:0: note: this is the location of the previous definition

and terminate the build.

This patch may cause some existing builds to fail, but they will be
builds that were previously at risk of unexpected runtime exceptions.
Those builds can also easily be switched to the GCC47 profile instead,
generating safe binaries.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18228 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-17 12:02:50 +00:00
Ard Biesheuvel 26ecc55c02 BaseTools IA32/X64: prevent .eh_frame sections from being generated
After the recent GNU linker script changes, the following warning is
emitted many times during the OVMF build:

BFD: <...>: warning: Empty loadable segment detected, is this intentional ?

This is caused by the fact that, now that the section layout has changed
somewhat, the .eh_frame section is assigned an ELF segment of its own,
which ends up with no contents at all after we strip the .eh_frame
section from the output. (Note that the program headers that contain the
segment information are completely irrelevant to us since the PE/COFF
conversion does not rely on them.)

Since we only retain the .eh_frame data for external debugging, and not
for things like stack unwinding or generating backtraces at runtime, we
can remedy the situation by passing -fno-asynchronous-unwind-tables on
the GCC command line. This option instructs the compiler to emit the
unwind data into a debug section called .debug_frame instead of into
.eh_frame.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18217 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-13 06:02:00 +00:00
Ard Biesheuvel 64ffb95441 BaseTools: remove ARMGCC and ARMLINUXGCC toolchains
The ARMGCC and ARMLINUXGCC toolchains are specific to the ARM and
AARCH64 architectures, and overlap with the toolchain configuration
that is provided by the GCC44 - GCC49 toolchains, which are defined
for all architectures.

To reduce the maintenance burden, and make it easier to keep these
different architectures aligned, remove the ARMGCC and ARMLINUXGCC
toolchains entirely.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18212 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-12 05:25:48 +00:00
Ard Biesheuvel 5c02fc49ae BaseTools: add CLANG35 toolchain with AARCH64 support
This adds support for building the AARCH64 platforms using the
Clang compiler and assembler combined with the GNU (cross-)linker.

The chosen name CLANG35 is based on version 3.5 being the oldest
supported version, but no issues are known that should prevent its
use with any later version.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18198 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-10 07:55:26 +00:00
Ard Biesheuvel c4a59af8c1 BaseTools IA32/X64: Use GccBase.lds instead of gcc*-ld-script
These scripts all now have the same contents, so we only need to use
GccBase.lds. Therefore we can delete gcc-4K-align-ld-script,
gcc4.4-ld-script and gcc4.9-ld-script.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18142 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-03 08:23:59 +00:00
Ard Biesheuvel 6b3720e438 BaseTools AARCH64: move to unified GCC linker script
Drop the GCC AARCH64 specific linker script and use the new
unified one instead.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18138 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-03 08:23:05 +00:00
Ard Biesheuvel c28a4ab663 BaseTools IA32/X64: get header size and alignment from ld commandline
Instead of hardcoding the values for the PE/COFF header size and the
section alignment, set them on the linker command line. This factors
out these values from the various linker scripts, which will allow us
to unify them in a subsequent patch.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18134 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-03 08:22:16 +00:00
Leif Lindholm 28e80befa4 BaseTools: aarch64: add -fno-asynchronous-unwind-tables to gcc cflags
Some toolchains, at least Fedora GCC, generate inline unwind tables in
object files. These confuses GenFw to no end, leading to build failures:
  GenFw: ERROR 3000: Invalid WriteSections64(): ...
         unsupported ELF EM_AARCH64 relocation 0x105.
  GenFw: ERROR 3000: Invalid WriteSections64(): ...
         unsupported ELF EM_AARCH64 relocation 0x0.

I am aware of no current use of these tables, so explicitly disable
their generation for aarch64.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17905 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-09 16:29:44 +00:00
Ard Biesheuvel 64a910f3da BaseTools: AArch64: use explicit linker scripts
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.

The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.

Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17824 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-06 15:57:50 +00:00
Jordan Justen 288ed59079 Revert tree to r17801
Revert r17802 "BaseTools: AArch64: use explicit linker scripts"
Revert r17803 "ArmVirtPkg: build runtime drivers with 64 KB section alignment"
Revert r17804 "IntelFrameworkModulePkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback"
Revert r17805 "IntelFrameworkModulePkg: AcpiS3SaveDxe: call S3Ready() at End-of-Dxe"
Revert r17806 "OvmfPkg: AcpiS3SaveDxe: prepare for End-of-Dxe callback"

Requested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17807 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02 07:23:33 +00:00
Ard Biesheuvel f0dbe9fa0a BaseTools: AArch64: use explicit linker scripts
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.

The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.

Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17802 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-02 06:36:00 +00:00
Yingke Liu bbb6369486 BaseTools: Updated tool_def to support 4K alignment.
Replace '/MERGE:.data=.text /MERGE:.rdata=.text' with /MERGE:.rdata=.data

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17726 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-29 03:14:33 +00:00
Yingke Liu 061eb5c31d BaseTools: Update IASL download link and remove specific version info.
The version of IASL compiler in the tools_def.template file no longer exists on the acpica.org site.
Update download link and remove the specific version info from the tools_def.template file.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17725 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-29 03:10:25 +00:00
Jordan Justen c85bc0c9d4 BaseTools/Conf: Don't support upper case nasm extensions
For *.asm and *.s, there have been cases of *.Asm and *.S files, but
since the nasm extensions are new, we don't need to support the upper
case extensions.

In other words, remove .Nasm and .NASM.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17544 6f19259b-4bc3-4df7-8a09-765794883524
2015-06-01 23:21:00 +00:00
Yingke Liu ec22bede67 BaseTools: Add default BuildRuleOrder in tools_def.template
*_*_*_*_BUILDRULEORDER = nasm Nasm NASM asm Asm ASM S s
*_XCODE32_*_*_BUILDRULEORDER    = S s nasm Nasm NASM
*_XCLANG_*_*_BUILDRULEORDER     = S s nasm Nasm NASM
*_XCODE5_*_*_BUILDRULEORDER     = S s nasm Nasm NASM

Tool Chain in Mac Os will use S as the first priority. Other tool chains
use nasm as the first priority.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17510 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-26 10:32:47 +00:00
Cinnamon Shia ca04b83afb NT32Pkg: Fix build errors from building secure boot with NT32 X64
Root cause: The CryptoPkg\Library\IntrinsicLib needs override MSFT build option to remove /Oi and /GL, 
but it doesn’t work because of the build option override in Nt32Pkg.dsc.
Solution: Remove /X in BaseTools/Conf/tools_def.template

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17069 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-23 05:39:51 +00:00
Liming Gao c5f1d437ed BaseTools Fix NASM tool version in comments of tools_def.template
NASM tool version should be 2.07 instead of 2.0.7.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16596 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-09 10:07:02 +00:00
Scott Duplichan 62771cee1d Fix ARM build failure with gcc 4.6.
Gcc option -mno-unaligned-access is supported by gcc 4.7 and newer, so it shouldn't be used with gcc 4.6.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16464 6f19259b-4bc3-4df7-8a09-765794883524
2014-12-02 00:44:04 +00:00
Scott Duplichan 915a379b1c BaseTools: Extend support for Windows hosted gcc to versions 4.4-4.7.
Revision 16400 adds support for Windows hosted gcc versions 4.8 and 4.9.
With this change, all of the GCCXX tool chains can be used from Windows.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16418 6f19259b-4bc3-4df7-8a09-765794883524
2014-11-24 02:43:17 +00:00
Scott Duplichan 285a175441 BaseTools: Modify gcc 4.8 and 4.9 tool chain definition to support building from Windows.
Here is a new patch that adds Windows support for both gcc 4.8.x and gcc 4.9.x. 
This time testing is more thorough: boot testing using Duet for all 4 combinations of 
IA32/X64 and gcc 4.8.2 and gcc 4.9.1 passes. A Windows hosted gcc 4.8.2 has been added here:
http://sourceforge.net/projects/edk2developertoolsforwindows/

The environment variable settings for Windows look like:

set UEFI_BUILD_TOOLS=%cd%\tools
set NASM_PREFIX=%UEFI_BUILD_TOOLS%\nasm211\
set GCC48_BIN=%UEFI_BUILD_TOOLS%\gcc482-x86\bin\
set GCC48_DLL=%UEFI_BUILD_TOOLS%\gcc482-x86\dll\;%GCC48_BIN%
set GCC48_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-arm\bin\
set GCC48_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-aarch64\bin\
set GCC49_BIN=%UEFI_BUILD_TOOLS%\gcc491-x86\bin\
set GCC49_DLL=%UEFI_BUILD_TOOLS%\gcc491-x86\dll\;%GCC49_BIN%
set GCC49_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-arm\bin\
set GCC49_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-aarch64\bin\

No change is needed for building from Linux. 

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16400 6f19259b-4bc3-4df7-8a09-765794883524
2014-11-18 02:38:20 +00:00
Liming Gao d808fc659d BaseTools: Correct NASM output file type for UNIXGCC and CYGGCC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16399 6f19259b-4bc3-4df7-8a09-765794883524
2014-11-18 02:19:47 +00:00
Nikolai Saoukh 0a0ca7877d BaseTools: Use '/' as path separator for objcopy --add-gnu-debuglink
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16172 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-25 02:29:18 +00:00
Andrew Fish e5367bfb61 BaseTools: Fix XCODE5 to work properly with NASM
The default object type for NASM is raw binary, and this will not link.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16085 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-10 16:48:59 +00:00