Similar to how OVMF implements this, add a FD definition for the varstore
firmware volume and the FTW areas. The template was taken from the file
OvmfPkg/VarStore.fdf.inc, and subsequently modified to accommodate the
differences in NOR flash layout. This affects the FvLength, Checksum and
BlockMap[0] fields in the FV header, the Size field of the varstore header,
and the Crc and WriteQueueSize fields of the FTW header. The event log
region is not used by ArmVirtQemu, so it has been omitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There is no longer a reason to use a different implementation of
NorFlashDxe for secure boot builds now that the varstore FV header can
carry either gEfiVariableGuid or gEfiAuthenticatedVariableGuid, and the
dependent code has been updated to deal with that. So move the secure
boot capable builds to the common NorFlashDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The interface to PL011UartInitializePort has changed in
ArmPlatformPkg/Drivers/PL011Uart with the title:
"ArmPlatformPkg: Add support to configure PL011 UART clock"
This patch updates the calls to PL011UartInitializePort(), in line with
that change, adding a parameter value using the PCD previously used
directly by the driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtPkg's Platform BDS has never had a progress bar. We can easily add
one, by copying the PlatformBootManagerWaitCallback() function verbatim
from
Nt32Pkg/Library/PlatformBootManagerLib/PlatformBootManager.c
It can be tested by passing the following option to QEMU (5 seconds):
-boot menu=on,splash-time=5000
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the course of porting ArmVirtPkg to the MdeModulePkg BDS, commit
1f73aef50c
ArmVirtPkg/PlatformBootManagerLib: add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 1f73aef50c, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
To support UEFI Secure Boot and the Linux persistent store with UEFI
variables, set PcdMaxVariableSize to 0x2000 bytes as is done in OvmfPkg.
For reference, the related Ovmf commits: 8cee3de72d441ca9
Also increase the maximum size for Authenticated variables in order to
handle a larger Signature List size as is done in OvmfPkg. Related Ovmf
commit: f5404a3e
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Linn Crosetto <linn@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Based on OvmfPkg commit 79c098b6d2.
Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that
ArmVirtPkg is less widely used by non-developers than OvmfPkg.
ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg.
About this patch:
- DxeServicesLib and SortLib are resolved generally (they have broad
client module type lists).
- ReportStatusCodeLib is resolved for UEFI_APPLICATION modules.
- GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib
and PlatformBootManagerLib, and resolved from under MdeModulePkg and
ArmVirtPkg, respectively.
- QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance.
- FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by
BootMaintenanceManagerUiLib, which we link into UiApp.
- PcdBootManagerMenuFile carries the FILE_GUID of
"MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from
"MdeModulePkg/MdeModulePkg.dec" points to
"MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf",
which, according to the commit that introduced it (a382952f82), only
'provides a very simple UI showing all the boot options recorded by
"BootOrder" and user can select any of them to boot'.
- Include the new core BDS driver, and include the boot manager
application, with the usual main menu entries.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: https://github.com/tianocore/edk2/issues/83
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
UefiBootManagerLib does not provide these functions, we have to implement
them. (EnableQuietBoot() puts up the nice TianoCore logo.)
OvmfPkg commits 817fb3ac2a and 8e8fd30377 have extracted these
functions already,
- from "IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c"
- to "OvmfPkg/Library/PlatformBootManagerLib/QuietBoot.c".
Copy the latter file, with minimal changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
QemuBootOrderLib can only filter out and reorder boot options; it cannot
create boot options. It relies on Platform BDS to auto-generate all
possible boot options first (for example, for new virtual devices that
have been configured since the last run of the virtual machine). Then it
will decide, case-by-case, whether each of those auto-generated boot
options should be preserved (and at what position), or removed.
Thus far, the only implementation of SetBootOrderFromQemu(), used in
connection with IntelFrameworkModulePkg BDS, has expected said complete
boot option list as an input parameter:
BdsEntry() [IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c]
// create empty list
InitializeListHead (
&BootOptionList
)
PlatformBdsPolicyBehavior( [ArmVirtPkg/Library/PlatformIntelBdsLib/IntelBdsPlatform.c]
BootOptionList
)
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(
BootOptionList
)
// at this point, BootOptionList starts with the preexistent boot
// options, and ends with the auto-generated options
SetBootOrderFromQemu( [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
BootOptionList
)
// write out changed boot order to UEFI variables
// The "BootOrder" variable may have changed. Refresh BootOptionList
// from it, and return it to BdsEntry().
With MdeModulePkg BDS, a BootOptionList is not propagated from BdsEntry()
to SetBootOrderFromQemu() and back. All processing is based directly on
the underlying "BootOrder" and "Boot####" variables.
In OvmfPkg, commit d27ec22d11 introduced a new instance of
QemuBootOrderLib, called QemuNewBootOrderLib. It is based on
UefiBootManagerLib, and rather than taking a complete BootOptionList as a
parameter, it expects that the "BootOrder" and "Boot####" variables are
complete in the above sense.
Rebase the boot order manipulation to UefiBootManagerLib and
QemuNewBootOrderLib, while keeping the requirement satisfied, like this:
BdsEntry() [MdeModulePkg/Universal/BdsDxe/BdsEntry.c]
PlatformBootManagerAfterConsole() [ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c]
EfiBootManagerConnectAll()
EfiBootManagerRefreshAllBootOption()
// at this point all auto-generated options exist at the end of
// "BootOrder"
SetBootOrderFromQemu() [OvmfPkg/Library/QemuNewBootOrderLib/QemuBootOrderLib.c]
// read boot options from "BootOrder" and "Boot####", then
// manipulate them
This patch parallels OvmfPkg commit 04fe914ba5.
Once the USE_OLD_BDS fallback is removed from OvmfPkg, the parameter list
of the SetBootOrderFromQemu() prototype can be updated to VOID.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Register the Enter key as the continue key (hot key to skip the boot
timeout). Map the F2 and ESC keys to the UI. Register the memory-mapped
Shell boot option.
The patch parallels OvmfPkg commit 07dd96e820. The
PlatformRegisterFvBootOption() and PlatformRegisterOptionsAndKeys()
functions are copied almost verbatim. The only changes are: internal
linkage for these functions (i.e., STATIC), and mentioning the ESC key in
the comments.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
MdeModulePkg/BDS doesn't launch the UI (Boot Manager Menu) from the
platform side. The platform is expected to store the boot timeout only, in
PcdPlatformBootTimeOut. This is usually done in
PlatformBootManagerBeforeConsole().
(ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg, not ArmVirtPkg.)
The patch parallels OvmfPkg commit 8dc0f0a6aa.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
With IntelFrameworkModulePkg BDS, the platform code is responsible for
updating console variables (e.g., with BdsLibUpdateConsoleVariable()), and
then connecting them (e.g., with BdsLibConnectAllDefaultConsoles()). This
is usually (although not necessarily) done in PlatformBdsPolicyBehavior().
With MdeModulePkg BDS, the platform is responsible for updating the
console variables in PlatformBootManagerBeforeConsole(). When that
function returns, BdsEntry() will automatically connect the consoles; the
platform is not responsible for the connection.
IntelFrameworkModulePkg MdeModulePkg
BdsEntry BdsEntry
PlatformBdsInit PlatformBootManagerBeforeConsole
+----> EfiBootManagerUpdateConsoleVariable
|
dispatch Driver#### | dispatch Driver####
| +> connect consoles
| |
PlatformBdsPolicyBehavior | | PlatformBootManagerAfterConsole
BdsLibUpdateConsoleVariable <--+ |
BdsLibConnectAllDefaultConsoles <+
display splash screen display splash screen
Thus, move the console variable massaging from the beginning of
PlatformBootManagerAfterConsole() (originally PlatformBdsPolicyBehavior())
to the end of PlatformBootManagerBeforeConsole(), and drop the explicit
BdsLibConnectAllDefaultConsoles() call.
This patch parallels OvmfPkg commit e9e9ad644f.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
The general BDS helper functions are now provided by MdeModulePkg's
UefiBootManagerLib, and no longer by IntelFrameworkModulePkg's
GenericBdsLib.
This patch parallels OvmfPkg commit 2b23b8d45b.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
In this rather mechanical patch, we replace the calls to GenericBdsLib's
BdsLibUpdateConsoleVariable() with calls to UefiBootManagerLib's
EfiBootManagerUpdateConsoleVariable(), which has the same purpose.
The latter uses CONSOLE_TYPE enum constants from
"MdeModulePkg/Include/Library/UefiBootManagerLib.h", for identifying the
console type / underlying UEFI variable in the first parameter.
This patch parallels OvmfPkg commit 9dc08ec657.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
"IntelFrameworkModulePkg/Include/Library/PlatformBdsLib.h" declares the
following interfaces:
- PlatformBdsInit
- PlatformBdsPolicyBehavior
- PlatformBdsBootFail
- PlatformBdsBootSuccess
- PlatformBdsLockNonUpdatableFlash
- LockKeyboards
From these, we've been using PlatformBdsInit() and
PlatformBdsPolicyBehavior().
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h" declares the three
interfaces below:
- PlatformBootManagerBeforeConsole
- PlatformBootManagerAfterConsole
- PlatformBootManagerWaitCallback
Comparing the BdsEntry() functions between
- "IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" and
- "MdeModulePkg/Universal/BdsDxe/BdsEntry.c",
we can establish the following mapping:
IntelFrameworkModulePkg MdeModulePkg
BdsEntry() BdsEntry()
PlatformBdsInit() <--------------> PlatformBootManagerBeforeConsole()
dispatch Driver#### <--------------> dispatch Driver####
connect consoles
PlatformBdsPolicyBehavior() <------> PlatformBootManagerAfterConsole()
The difference in connecting the consoles will be addressed in a later
patch, now we just rename the functions according to the mapping above,
and copy the call site comments from MdeModulePkg's BdsEntry().
For the third interface, PlatformBootManagerWaitCallback(), add an empty
implementation (and copy the comment from the library class header).
Platform BDS can use this callback to draw a progress bar, for example.
This patch parallels OvmfPkg commit a7566234e9.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Create a copy of PlatformIntelBdsLib under the name
PlatformBootManagerLib, with the following initial changes:
- replace PlatformBdsLib references with PlatformBootManagerLib in
comments,
- replace "IntelBdsPlatform" with "PlatformBm" in file names and their
references,
- generate a new FILE_GUID.
PlatformBootManagerLib will be linked into the BDS driver from
MdeModulePkg.
This patch parallels OvmfPkg commit 3054188189.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Now that we have moved the handling of the xen,xen DT node to XenioFdtDxe,
remove its handling from VirtFdtDxe. Since the only functionality that
remains is handling the virtio,mmio DT node, rename VirtFdtDxe to
VirtioFdtDxe to reflect that. Also update the platforms that use this
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the only functionality that remains in VirtFdtDxe is enumerating
the respective virtual I/O buses, it no longer makes sense to have a driver
that is shared between Xen domU and QEMU. So move the Xen I/O DT node
handling to a new driver, and update ArmVirtXen to switch to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that FdtClientDxe is the core driver that takes ownership of the host
supplied FDT, it makes sense to put it in charge of installing the FDT
configuration table as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This type is not used in the code, so drop the definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We no longer care when VirtFdtDxe executes, since
- the driver sets no dynamic PCDs any longer, and
- the only remaining functionality centers on VirtioMmioInstallDevice()
and XenIoMmioInstall() function calls and FDT configuration table
installation.
So drop the A PRIORI declaration.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The RTC driver no longer relies on VirtFdtDxe to set the pl031 RTC base
address in a dynamic PCD, so drop the handling altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This moves QEMU based platforms to ArmVirtPL031FdtClientLib, so that we no
longer have to rely on VirtFdtDxe to execute first and set the PL031 base
address in a dynamic PCD.
The only driver which [transitively] depends on this PcdPL031RtcBase PCD is
EmbeddedPkg/RealTimeClockRuntimeDxe, so this conversion cannot affect any
other users and is thus safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library ArmVirtPL031FdtClientLib which is intended to
be incorporated into RealTimeClockRuntimeDxe via NULL library class
resolution. This allows us to make RealTimeClockRuntimeDxe depend on the
FDT client protocol, and discover the PL031 base address from the device tree
directly rather than relying on VirtFdtDxe to set the dynamic PCDs.
The NULL library class resolution approach to strictly order production and
consumption of dynamic PCDs is not generally safe in cases such as this one,
where the producer and the consumer of the PCD are both libraries. However,
since the PCD is produced in this library's constructor, and the consumer
library's constructor 'LibRtcInitialize' is not a 'true' constructor (it is
invoked explicitly by RealTimeClockRuntimeDxe), this case is guaranteed to
be safe after all.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 03b6bed17e ArmVirtPkg/XenRelocatablePlatformLib: rewrite DTB
memory node retrieval in C") introduced a FindMemNode () C function
that takes pointers to system memory base and size as arguments, but the
calling code passes them in the wrong order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Now that the PCI host bridge driver parses the DT node that describes
the PCI host bridge directly via the FDT client protocol, we can drop the
handling from VirtFdtDxe completely.
This means some PCI related PCDs are no longer set, such as PcdPciBusMin,
PcdPciBusMax, PcdPciIoBase, PcdPciIoSize, PcdPciIoTranslation,
PcdPciMmio32Base and PcdPciMmio32Size. Since these PCDs are specific to
ARM (and declared in ArmPlatformPkg), and not used anywhere else by the
ArmVirtPkg platforms, we can simply stop populating them, and drop all
references to them.
It also means that we can no longer rely on PcdPciDisableBusEnumeration
to be set before it is consumed by PciBusDxe and QemuFwCfgAcpiPlatformDxe,
so make those depend on FdtPciPcdProducerLib explicitly via NULL library
class resolution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate various dynamic PCDs with
information retrieved from the host-provided device tree, perform the
PCI ECAM related DT node parsing directly in PciHostBridgeDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make BaseCachingPciExpressLib depend on PciPcdProducerLib, so that we
have a chance to populate PcdPciExpressBaseAddress based on the contents
of the device tree.
Also update the platforms under ArmVirtPkg that support PCI to use the
special MAX_UINT64 value as the build time default for
PcdPciExpressBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library FdtPciPcdProducerLib which is intended to
be incorporated into modules that consume the PCI related dynamic PCDs
PcdPciExpressBaseAddress and PcdPciDisableBusEnumeration, either via NULL
library class resolution or via a direct dependency (for other libraries
or modules in ArmVirtPkg). This allows us to make them depend on the FDT
client protocol, and populate these PCDs based on the presence and the
contents of a 'pci-host-ecam-generic' DT node.
This also overloads the meaning of PcdPciExpressBaseAddress, which we will
set to MAX_UINT64 to signify that the actual values of these two PCDs have
not been assigned yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove the handling of the fw_cfg DT node from VirtFdtDxe now that the
fw_cfg client library has been moved to the FDT client protocol, and no
longer relies on VirtFdtDxe to pass this information via dynamic PCDs.
Since the PCDs in question are now no longer used, remove them from the
various DEC and DSC files as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make this library depend on the FDT client protocol to access the
host supplied device tree directly rather than depending on VirtFdtDxe
to set them using dynamic PCDs.
Since this library is used by several drivers (BdsDxe, SmbiosPlatformDxe,
SmbiosDxe and QemuFwCfgAcpiPlatformDxe), we will end up parsing the device
tree and the fwcfg node at least four times. However, no dynamic PCDs are
involved anymore, and will even be removed completely in a subsequent
patch. So the conversion is not optimal, but guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The timer code no longer relies on VirtFdtDxe to set the PCDs, so remove
the handling of the timer node and the references to those PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new dedicated ArmVirtTimerFdtClientLib to populate the
various timer related PCDs at driver load time rather than relying on
VirtFdtDxe to do it. Since ArmPkg/TimerDxe is the only consumer of these
PCDs, which is the DXE driver ArmVirtTimerFdtClientLib is intended to
complement, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library ArmVirtTimerFdtClientLib which is intended to
be incorporated into TimerDxe via NULL library class resolution. This
allows us to make TimerDxe depend on the FDT client protocol, and
discover the timer interrupts from the device tree directly rather than
relying on VirtFdtDxe to set the dynamic PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The detection of the PSCI method has been moved to the EfiResetSystemLib
implementation, so drop the handling from VirtFdtDxe. Since no users
remain of gArmVirtTokenSpaceGuid.PcdArmPsciMethod, remove that as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to detect the PSCI method, move our
EfiResetSystemLib to the FDT client protocol to interrogate the device
tree directly.
Since this library is only consumed by EmbeddedPkg/ResetRuntimeDxe, and
considering that the PCD is no longer set, and even removed completely in a
subsequent patch, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that we moved the GIC discovery to our ArmGicArchLib implementation,
we can remove it from VirtFdtDxe, since it is no longer used. Remove the
PcdArmGicRevision declaration and definitions as well: VirtFdtDxe no longer
sets it, and no other drivers consume its value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate the GIC related PCDs, move
this handling to our implementation of ArmGicArchLib, and retrieve the
required DT info using the new FDT client protocol.
This removes one of the reasons we need to load VirtFdtDxe first using
an 'A PRIORI' declaration in the platform FDF.
As Laszlo kindly confirms:
So, ultimately, the only user of this library instance is
"ArmPkg/Drivers/ArmGic/ArmGicDxe.inf". ... Indeed, checking the build
report file for ArmVirtQemu (AARCH64), I find ArmVirtGicArchLib (and
ArmGicLib too) only under "ArmPkg/Drivers/ArmGic/ArmGicDxe.inf".
which means that the constructor is only invoked once, and so the dynamic
PCDs are set in time for ArmGicDxe to consume them, and never afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add FdtClientDxe to the various platforms under ArmVirtPkg, so that the
drivers we will update to depend on the FDT client protocol in subsequent
patches will remain in working order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a new DXE driver FdtClientDxe to produce the FDT client
protocol based on a device tree image supplied by the virt host.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This introduces the FdtClientProtocol, which will be used to expose the
device tree provided by the host to other DXE drivers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdPeim dynamic PCD driver is dispatched explicitly via an 'A PRIORI'
declaration in the platform DSC. Without that declaration, the PEI module
can never be dispatched since it transitively (via PeiPcdLib) depends on
a PPI it produces itself. So use the NULL PcdLib explicitly only for
this driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The PcdDxe dynamic PCD driver is dispatched explicitly via an 'A PRIORI'
declaration in the platform DSC. Without that declaration, the DXE driver
can never be dispatched since it transitively (via DxePcdLib) depends on
protocols it produces itself. So use the NULL PcdLib explicitly only for
this driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Nothing we use on any of the ArmVirtPkg platforms depends on the
ArmPlatformSecExtraActionLib library class, so drop the resolution
from ArmVirt.dsc.inc
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The built in Linux loader was a temporary solution to boot ARM Linux
without EFI support in the OS. Now that EFI support is merged in the
upstream v4.5 release, we no longer need it. So drop it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Edk2 commit 8a45f80eda ("MdeModulePkg: Make HII configuration settings
available to OS runtime") implements the optional UEFI feature described
in "31.2.11.1 OS Runtime Utilization" in UEFI v2.6.
While this feature might show benefits down the road even in QEMU virtual
machines, at the moment it only presents drawbacks:
- it increases the EfiRuntimeServicesData footprint,
- it triggers HII compatibility problems between edk2 and external drivers
unconditionally, even if the end-user is not interested in HII and/or in
configuring said drivers (see
<https://www.redhat.com/archives/vfio-users/2016-March/msg00153.html>
and <http://thread.gmane.org/gmane.comp.bios.edk2.devel/9894> for an
example).
While the feature was being introduced, popular demand for a controlling
Feature PCD rose (see
<http://thread.gmane.org/gmane.comp.bios.edk2.devel/7626>), which is why
we can set it now to FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This introduces the .DSC define 'PURE_ACPI_BOOT_ENABLE', defaulting to
FALSE, which controls the value of the feature PCD 'PcdPureAcpiBoot'.
This allows an ArmVirtQemu image to be built that restricts the OS to
booting in ACPI mode.
This feature is only added to ArmVirtQemu, and not to ArmVirtQemuKernel,
the reason being that the latter is mostly intended for development work,
where the burden of adding 'acpi=force' if you need it is much more
tolerable than when trying to boot an installer on a production KVM guest
instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The arm64 kernel is hardwired to prefer DT over ACPI, unless 'acpi=force'
is passed on the kernel command line. The only other way to force the
kernel to use ACPI is not to pass an FDT to it in the first place. So
introduce a PCD that inhibits the installation of the QEMU supplied FDT
as a configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
At this point, this signal doesn't do anything yet.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Change our resolution for the previously unused CpuExceptionHandlerLib
from the null implementation to the newly added implementation specific
to AARCH64 and ARM. This is needed since our CpuDxe will start using it
in a subsequent patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Unlike Linux on x86, which typically honors the PCI configuration performed
by the firmware, Linux on ARM assumes that the PCI subsystem needs to be
configured from scratch. This is not entirely unreasonable given the
historical background of embedded systems using very basic bootloaders,
but is no longer tenable with Linux on arm64 moving to UEFI and ACPI in the
server space. For this reason, PCI support in the arm64 kernel running under
ACPI is likely to move to the x86 model of honoring the PCI configuration
done by the firmware.
So let's align with that in our DT based configuration as well, and set the
/chosen/linux,pci-probe-only property to 1 in the Device Tree before we
hand it to the OS.
In case we are exposing an emulated VGA PCI device to the guest, which may
subsequently get exposed via the Graphics Output protocol and driven as an
efifb by the OS, this ensures the PCI resource allocations for the framebuffer
are not overridden, since that would cause the framebuffer to stop working.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc files of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This adds the new Virtio-RNG DXE module to the default build of
ArmVirtQemu. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ACPI spec predates the AARCH64 architecture by 5 versions, so there
is no point in supporting anything below v5.0. So set the PCD that
controls the ACPI table generation to the appropriate value.
Note that the current consumers of this PCD only check whether bit 1
is set or not (i.e., ACPI v1.0b), but this may change in the future,
so let's choose a meaningful value right away.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
No ARM support for ACPI is planned under any OS we intend to run under
ArmVirtQemu-ARM, so remove the drivers from the ARM build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a version of ArmVirtQemu that does not execute in place from
emulated NOR flash, but implements the Linux kernel boot protocol, and executes
from DRAM instead. This allows UEFI to be loaded as a payload by a previous
bootloader stage such as ARM Trusted Firmware/OP-TEE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This introduces ArmQemuRelocatablePlatformLib, which started out as a
straight copy of ArmXenRelocatablePlatformLib, but has been modified so
that ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf can be used with
QEMU as well as with Xen. It retains the self relocation and FDT parsing
for the system memory, but uses the QEMU MMU layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Allow the use of a patchable PCD for the initial DT base address recorded in
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress, so that the module
can be reused by a relocatable version of ArmVirtQemu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds ARM support to the ArmVirtXen platform. As is the case for
AARCH64, the ARM port adheres to the ARM Linux boot protocol, i.e.,
it expects the address of a DTB describing the platform to be passed
in r2, and relocates itself at runtime to the actual load time memory
offset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19333 6f19259b-4bc3-4df7-8a09-765794883524
This is a port of the AARCH64 low level init routines to ARM. This
mainly covers the platform boot code that extracts the system base
and size from the DTB, copies it and updates the FD and FV base
addresses according to the load time offset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19332 6f19259b-4bc3-4df7-8a09-765794883524
This adds support to the self relocating PrePi instance that is built
as a PIE ET_DYN executable. It primarily involves porting the relocation
routine to use ELF32 REL entries instead of ELF64 RELA entries which is
what AArch64 uses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19331 6f19259b-4bc3-4df7-8a09-765794883524
Parsing the DTB early on using a handcoded assembly routine is a pointless
waste of brain cycles, since the UEFI firmware always executes from RAM
under Xen. So instead, set up a temporary stack in the memory region at the
beginning of the image, and use the libfdt C library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19330 6f19259b-4bc3-4df7-8a09-765794883524
This adds the RVCT armlink command line switches to build modules of type
DXE_RUNTIME_DRIVER with 4 KB PE/COFF section alignment, allowing the OS
to apply stricter permissions to the .text and .data sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19237 6f19259b-4bc3-4df7-8a09-765794883524
Here we add the memory space for the high memory nodes except the lowest
one in FDT. So these spaces will show up in the UEFI memory map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap at 79 chars, use NULL, print Status]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19124 6f19259b-4bc3-4df7-8a09-765794883524
While QEMU NUMA support on ARM will introduce more than one /memory node
in the device tree, it needs to find the lowest one and set
PcdSystemMemorySize with the actual size of this memory node.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19123 6f19259b-4bc3-4df7-8a09-765794883524
The ARM RVCT compiler does not allow implicit casts between enumerated
types and integer types. In this particular case, the STUB_FILE::Position
member is overloaded as a KERNEL_BLOB_TYPE identifier, so it does not
hurt to make that cast explicit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19108 6f19259b-4bc3-4df7-8a09-765794883524
Building the 32-bit ARM targets with secure boot enabled requires
a library resolution for the ArmSoftfloatLib dependency of
OpenSslLib. So provide one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19032 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePi init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18991 6f19259b-4bc3-4df7-8a09-765794883524
Now that all PeiServicesTablePointerLib and PrePiHobListPointerLib
library dependencies in both ArmVirtQemu and ArmVirtXen are satisfied
by implementations that do not depend on ArmPlatformGlobalVariableLib,
we can remove all mention of it from the various .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18986 6f19259b-4bc3-4df7-8a09-765794883524
As pointed out by Eugene, the ArmPlatformPkg implementation of
PeiServicesTablePointerLib violates the PI sec, since it uses
ArmPlatformGlobalVariableLib to store the PEI services table pointer
rather than the thread ID cpu registers as the spec requires.
So instead, move to the ArmPkg version of this library, which does
adhere to the PI spec.
Reported-by: Eugene Cohen <eugene@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18985 6f19259b-4bc3-4df7-8a09-765794883524
Beyond just changing the directly related lines in the FDF and DSC files,
we have to adapt the EarlyFdtPL011SerialPortLib and FdtPL011SerialPortLib
instances as well, in the same patch. This is because the EmbeddedPkg
driver expects the SerialPortSetAttributes(),
SerialPortSetControl() and SerialPortGetControl() functions from
SerialPortExtLib, while the MdeModulePkg driver expects them from
SerialPortLib itself.
We cannot implement these functions in ArmVirtPkg's SerialPortLib
instances *before* flipping the driver, because it would cause double
function definitions in the EmbeddedPkg driver. We also can't implement
the functions *after* flipping the driver, because it would cause
unresolved function references in the MdeModulePkg driver. Therefore
we have to implement the functions simultaneously with the driver
replacement.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18973 6f19259b-4bc3-4df7-8a09-765794883524
The ID mapping routines on virtual platforms simply map the entire
hardware supported physical address space as device memory, and then
punch some holes for regions that need to be mapped cacheable.
On virtual platforms hosted on CPUs that support a large physical
address range, this may result in a lot of overhead, i.e., 4 KB of page
tables for each 512 GB of address space, which quickly adds up (i.e.,
2 MB for the architectural maximum of 48 bits).
Since there may be a platform specific limit to the size of the (I)PA
space that is not reflected by CPU id registers, restrict the range of
the ID mapping to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize bits.
This makes sense by itself, since we cannot manipulate mappings above
that limit anwyay (because they are not covered by GCD), and it allows
the PCD be set to a lower value by platforms whose (I)PA space is
smaller than the hardware supported maximum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18929 6f19259b-4bc3-4df7-8a09-765794883524
KVM uses a fixed size of 40 bits for its intermediate physical address
space, so there is no need to support anything beyond that even if the
host hardware does.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18928 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture version 7 and later mandates that device mappings
have the XN (non-executable) bit set, to prevent speculative instruction
fetches from read-sensitive regions. This implies that we should not map
regions as device if we want to execute from them, so the NOR region that
contains our FD image should be mapped as normal memory instead.
The MMU code deals correctly with overlapping ARM_MEMORY_REGION_DESCRIPTOR
entries, and later entries in the array take precedence over earlier ones.
So simply add an entry to the end of the array that overrides the mapping
attributes of the FD image, wherever it resides.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18889 6f19259b-4bc3-4df7-8a09-765794883524
Drop the call to ArmInvalidateDataCache () from the PrePi startup
sequence. This kind of data cache maintenance should not be performed
when running under virtualization.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18757 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 toolchains also invoke the software stack checker
functions on certain code - so include BaseStackCheckLib for
AARCH64 as well as for ARM. Since this was the only difference
between [LibraryClasses.ARM] and [LibraryClasses.AARCH64],
merge the two into the existing [LibraryClasses.common].
At the same time, fix the grammar for the related comments.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18617 6f19259b-4bc3-4df7-8a09-765794883524
In order to support the Properties Table memory protection feature
on 32-bit ARM, build DXE_RUNTIME_DRIVER type binaries with 4 KB section
alignment by setting the common-page-size linker command line option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18566 6f19259b-4bc3-4df7-8a09-765794883524
The TFTP command is easy to use, it has very nice documentation
(accessible with "HELP TFTP" in the shell), and it's a very versatile
tool for downloading files from the host to the guest, via virtual
network, while the guest is in the UEFI shell.
Even better, enabling this command in the shell increases the
uncompressed FVMAIN size only by 8192 bytes, in my AARCH64 build of
VirtArmQemu.dsc, and the final size increase (after LZMA compression)
that is visible in the FVMAIN_COMPACT volume is merely 1976 bytes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18555 6f19259b-4bc3-4df7-8a09-765794883524
A DMA-like transfer interface has recently been implemented in QEMU for
fw-cfg. For ARM and AARCH64 virtual machines, the binding prescribes a new
8-byte wide register at offset 0x10 in the register block. Make VirtFdtDxe
expose this register if it is present.
Please see "docs/specs/fw_cfg.txt" in the QEMU tree for more information.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18544 6f19259b-4bc3-4df7-8a09-765794883524
Commit SVN r18503 ("MdeModulePkg DxeCore: Take the range in resource
HOB for PHIT as higher priority") changed the GCD init logic to take
the sum of the region sizes in gMemoryTypeInformation[] into account
when estimating the minimal amount of memory needed to boot the system.
Unfortunately, as an unintended side effect, this change results in boot
failures of ArmVirtQemu when running with QEMU's default memory size of
128 MB. The reason is that the sum of the gMemoryTypeInformation region
sizes plus the size of the inital PEI region exceeds 128 MB. Since we do
not actually need to preallocate 20,000 pages' worth of BootServicesData
memory, reduce this figure to the more reasonable 12,000.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18533 6f19259b-4bc3-4df7-8a09-765794883524
According to the UEFI spec, EFI_EVENT_GROUP_READY_TO_BOOT "is notified by
the system when the Boot Manager is about to load and execute a boot
option". ArmVirtPkg doesn't do this currently when launching a kernel from
the QEMU command line. OvmfPkg does (see git commit 28a34033ee).
At least two edk2-wide callbacks are worth mentioning:
- OnReadyToBoot() in
"MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c" performs
variable reclaim and (optionally) installs variable usage statistics as
a vendor config table;
- OnReadyToBoot() in
"SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.c"
installs the image execution info table if it doesn't exist yet, in
SecureBoot-enabled builds.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18513 6f19259b-4bc3-4df7-8a09-765794883524
When executing on a LPAE capable 32-bit ARM platform, we support
up to 40 bits of physical address space so set PcdPrePiCpuMemorySize
accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18428 6f19259b-4bc3-4df7-8a09-765794883524
On 32-bit ARM, split system memory into a region below (and up to) 4 GB
and a region above 4 GB. This is necessary to get the DXE core to consider
the former as the resource descriptor that describes the primary memory
region that also covers the PHIT region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18427 6f19259b-4bc3-4df7-8a09-765794883524
The recent changes to ArmVExpress-FVP-AArch64 in SVN r18309
contained a hunk to ArmVirt.dsc.inc which was included in
error. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18321 6f19259b-4bc3-4df7-8a09-765794883524
Now that the PL180 and PL111 drivers know how to behave when executed
on the Foundation model (which does not emulate the hardware), we can
remove the ARM_FOUNDATION_FVP ifdefs and produce a single build that
runs on both the Foundation model and the Base model.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18309 6f19259b-4bc3-4df7-8a09-765794883524
The ArmVirtPrePiUniCoreRelocatable module comes with its own GNU
linker script to create a PIE executable that can relocate itself
at runtime. In order to be able to build this module using CLANG,
we need to adhere to the section alignment passed via to the linker
using -z commmon-page-size, so add this to the linker script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18203 6f19259b-4bc3-4df7-8a09-765794883524
The relocated immediate notation supported by GNU as (e.g., #:lo12:foo)
is not supported by clang. Since we are loading a constant value, they
were not entirely appropriate here anyway, so simply replace them with
assembler arithmetic expressions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18202 6f19259b-4bc3-4df7-8a09-765794883524
When MdeModulePkg/Universal/SmbiosDxe is instructed to compose & install
an SMBIOS 3.0 entry point, it keys the Docrev (specification document
revision) field of that structure off of PcdSmbiosDocRev. An upcoming
OvmfPkg patch will have OvmfPkg/Library/SmbiosVersionLib set this PCD
dynamically. Because we use that driver in the ArmVirtQemu.dsc platform,
we must provide a default for the dynamic PCD.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18181 6f19259b-4bc3-4df7-8a09-765794883524
The upcoming OvmfPkg patches will implicitly affect the ArmVirtQemu.dsc
build, necessitating a default value for the new dynamic
PcdQemuSmbiosValidated. Add it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18179 6f19259b-4bc3-4df7-8a09-765794883524
This reverts git commit d2733aa9 (SVN r18042), because it is empty now.
The original problem:
Many universal DXE drivers in edk2 can be controlled by setting dynamic
PCDs. Such a PCD must be set before the consumer DXE driver is
dispatched.
should be hereafter solved similarly to how
OvmfPkg/Library/SmbiosVersionLib is plugged into
MdeModulePkg/Universal/SmbiosDxe now (originally suggested by Jordan
Justen <jordan.l.justen@intel.com>).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18177 6f19259b-4bc3-4df7-8a09-765794883524
This patch de-duplicates the logic added in commit
ArmVirtPkg: QemuFwCfgToPcdDxe: set SMBIOS entry point version
dynamically
(git c98da334, SVN r18043) by hooking DetectSmbiosVersionLib into
SmbiosDxe.
Although said commit was supposed to work with SMBIOS 3.0 payloads from
QEMU, in practice that never worked, because the size / signature checks
in SmbiosVersionInitialization() would always fail, due to the SMBIOS 3.0
entry point being structurally different. Therefore this patch doesn't
regress ArmVirtPkg.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18176 6f19259b-4bc3-4df7-8a09-765794883524
Now that the ARM BDS has been removed, there is a remaining BdsLib
dependency in ArmVirtXen that has now become unresolved. So re-add
the BdsLib resolution that we removed from ArmVirt.dsc.inc to
ArmVirtXen.dsc
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18156 6f19259b-4bc3-4df7-8a09-765794883524
The ARM build still needs an intermediate loader to boot Linux,
since ARM/Linux has no builtin UEFI boot stub (yet).
So add the LinuxLoader UEFI application to the FV, and enable
the FvSimpleFileSystemDxe driver so that we can invoke the
Linux loader from the shell, e.g.,
Shell> linuxloader fs2:zImage -c console=ttyAMA0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18155 6f19259b-4bc3-4df7-8a09-765794883524
The PcdFirmwareVendor PCD was never used on this platform, since
it has never supported the ARM BDS. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18154 6f19259b-4bc3-4df7-8a09-765794883524
ARM BDS support in ArmVirtQemu has been broken since SVN r17969
("ArmPkg/BdsLib: Remove Linux loader from BdsLib") dated July 14th.
Instead of fixing this, let's get rid of the ARM BDS and LinuxLoader
altogether: they violate both the UEFI spec and the arm64 Linux boot
protocol, and lack the level of integration with the QEMU command
line that the Intel BDS has when running under ArmVirtPkg or OvmfPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18153 6f19259b-4bc3-4df7-8a09-765794883524
Move to the parametrised generic GCC linker script and set 64 KB
alignment, instead of using the AARCH64 specific incremental linker
script for 64 KB alignment which is about to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18140 6f19259b-4bc3-4df7-8a09-765794883524
Now that GenFw correctly propagates the minimum alignment of the ELF
input sections to the PE/COFF binary, we can simply select 'auto'
alignment in the FDF Rule section instead of tweaking it by hand.
Also add the FIXED FFS attribute to the module types that may execute
in place. This enables a newly added optimization in GenFfs that strips
redundant padding, preventing excessive waste of FV space if the section
alignment is considerable (i.e., 2 KB or 4 KB)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18122 6f19259b-4bc3-4df7-8a09-765794883524
Since it is arguably incorrect to infer the GIC revision from CPU
ID and GIC feature registers on platforms that describe the GIC in
the device tree, this implements the library class ArmGicArchLib
tailored for such platforms.
The supported GIC revision is retrieved from the dynamic PCD that
is set based on the GIC DT node.
This means this library can only execute post DXE core, but this is
not a problem for any of the virt platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18102 6f19259b-4bc3-4df7-8a09-765794883524
In order to allow a ArmGicArchLib to be implemented that returns
the supported GIC revision based on the device tree, add handling
to VirtFdtDxe to record the GIC revision at DT parsing time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18101 6f19259b-4bc3-4df7-8a09-765794883524
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
(This patch parallels OvmfPkg commit 37baf06b (SVN r17676).)
PcdSmbiosVersion controls the version number of the SMBIOS entry point
table (and other, related things) that the universal
"MdeModulePkg/Universal/SmbiosDxe" driver, providing EFI_SMBIOS_PROTOCOL,
installs.
The "virt" machine type of QEMU generates SMBIOS payload for the firmware
to install. The payload includes the entry point table ("anchor" table).
OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is
the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe"
driver); however, we can parse the entry point version from QEMU's anchor
table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that
version.
As default for PcdSmbiosVersion we should keep the current 0x0300 value
(ie. SMBIOS 3.0) from "MdeModulePkg/MdeModulePkg.dec"; that spec version
was specifically created for ARM / AARCH64 needs.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18043 6f19259b-4bc3-4df7-8a09-765794883524
Many universal DXE drivers in edk2 can be controlled by setting dynamic
PCDs. Such a PCD must be set before the consumer DXE driver is dispatched.
(In general we assume that the DXE driver will consume the PCD in its
entry point, or in the constructor of a library instance it links against.
In special cases this requirement can be relaxed a bit, if we know that
the DXE driver accesses the PCD only in a protocol member function that it
exports.)
On the QEMU platform, the PCD values to be set for the universal drivers
are frequently derived from fw_cfg files that QEMU exports.
In OvmfPkg we tend to handle this in the following way:
- For IA32 and X64, OvmfPkg provides a QemuFwCfgLib instance that is
usable in PEI.
- In PlatformPei, fw_cfg files can be loaded and transformed to PCD
values.
- Any DXE driver is bound to be dispatched after the PEI phase is done.
(In specific cases other ordering solutions might be possible, via Depex
or protocol notify, etc.)
In ArmVirtPkg/ArmVirtQemu, things differ a bit:
- We don't have an ArmVirtPkg-specific ("Platform") PEIM. This is actually
a good thing for now, so let's not introduce one just for this purpose.
- Even if we had such a PEIM, it could not easily access fw_cfg: the MMIO
addresses of the fw_cfg device are available only in the DTB that QEMU
exports.
(Accordingly, our QemuFwCfgLib instance is restricted to DXE_DRIVER
modules: VirtFdtDxe parses the DTB, stores the fw_cfg addresses in PCDs,
and then QemuFwCfgLib's constructor fetches those PCDs.)
There are some examples in ArmVirtPkg where early code is forced to
parse the DTB manually, but those examples are all painful, and our goal
here (controlling universal DXE drivers) doesn't justify more of that
pain.
Therefore, introduce a separate, minimal DXE driver that is dispatched
strictly after VirtFdtDxe (so that it can use QemuFwCfgLib), and strictly
before other DXE drivers (so that it can set dynamic PCDs for them).
Because VirtFdtDxe is already ordered with the APRIORI DXE file, it is
simplest to do the same for the new driver.
Actual fw_cfg files and PCDs shall be accessed in future patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18042 6f19259b-4bc3-4df7-8a09-765794883524
Change default terminal type to be consistent with default
ConIn/ConOut device path, which is now determined by TTY_TERMINAL
flag, TTYTERM or VT100.
I can't say this is a bug, as we can pass the whole console device
path to ConnectController, and TerminalDxe driver will pick up the
terminal in the remaining device path. However, in rare circumstances,
the console devices may be disconnected with the driver, and they will
be ignored by ConPlatformDxe until we pass the device path explicitly
just as BDS.
Changing default terminal type to be the same with console device
path could help serial terminal be reconnected with normal connect
controller operation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
PcdDefaultBootType has been removed when the embedded
Linux Loader has been removed from BdsLib.
The boot arguments (defined by PcdDefaultBootArgument)
are now always targetting EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17972 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17912 6f19259b-4bc3-4df7-8a09-765794883524
Enable selecting the TtyTerminal type for the ARM BDS build of QEMU using
the TTY_TERMINAL define.
Convert INTEL_BDS define to check for value (!if) rather than just definition
(!ifdef) to allow setting of either value on command line.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17899 6f19259b-4bc3-4df7-8a09-765794883524
Add a fixed pointer PCD to allow build-time selection of VT100 or TTY terminal
type. The default remains VT100 emulation.
Add support for building the ARM QEMU platforms with the TTY terminal
with the "-D TTY_TERMINAL" build option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[Roy Franz: minor edits: add TtyTerminal GUID, rename LINUX_TERMINAL to TTY_TERMINAL]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17898 6f19259b-4bc3-4df7-8a09-765794883524
The linker script is specific to GCC toolchain.
So, this script will not work with other linkers
(eg: ARM Toolchain Linker, Microsoft Linker, etc).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17865 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the declaration and definition of mSystemMemoryEnd so that it
is correctly annotated as a non-function symbol. Also adds the ASM_PFX
prefix, which is empty on AARCH64 but should be included for correctness.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17861 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the ArmVirtXen build that was broken by r17835, which adds
a global variable mSystemMemoryEnd which is shared between a module
and a library it depends on.
Add the same global variable to the relocatable PrePi used by ArmVirtXen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17837 6f19259b-4bc3-4df7-8a09-765794883524
This adds the 64 KB alignment overlay linker script to the linker
command line of DXE_RUNTIME_DRIVER modules. This makes these modules
compatible with the new Properties Table feature by aligning the .text
and .data sections to 64 KB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17825 6f19259b-4bc3-4df7-8a09-765794883524
This adds the 64 KB alignment overlay linker script to the linker
command line of DXE_RUNTIME_DRIVER modules. This makes these modules
compatible with the new Properties Table feature by aligning the .text
and .data sections to 64 KB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17803 6f19259b-4bc3-4df7-8a09-765794883524
AuthVariableLib and TpmMeasurementLib library classes are now linked with
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
to optionally support secure variables.
For ArmVirtPkg,
link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
when SECURE_BOOT_ENABLE = TRUE,
and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
when SECURE_BOOT_ENABLE = FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17763 6f19259b-4bc3-4df7-8a09-765794883524
Currently, the ArmVirtPkg platforms built with the Intel BDS fail
to signal the end-of-DXE event 'gEfiEndOfDxeEventGroupGuid' when
entering the BDS phase, which results in some loss of functionality,
i.e., variable reclaim in the VariableDxe drivers, and the splitting
of the memory regions that is part of the recently added UEFI 2.5
properties table feature.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal that event, since there may be
platform specific ordering constraints with respect to the signalling
of the event that are difficult to honor at the generic level.
So add the SignalEvent () call to PlatformBdsInit () of ArmVirtPkg's
PlatformBdsLib implementation for the Intel BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17713 6f19259b-4bc3-4df7-8a09-765794883524
This is a followup to r17554 ("ArmVirtPkg: increase memory
preallocations to reduce region count") that increases the sizes
of the preallocated regions to account for the footprint of the
crypto and authentication libraries. This is only done if secure
boot is enabled at build time, to prevent imposing a larger minimum
RAM size on non-secure builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17646 6f19259b-4bc3-4df7-8a09-765794883524
Both files originate from ArmPlatformPkg.
The copyright notices at the top of "License.txt" have been refreshed as
follows:
- I grepped ArmVirtPkg for "copyright", case-insensitively
- for each copyright holder company, I unified the intervals to the
strictest superset (no absent year was introduced in this process)
- I listed the copyright notices in decreasing order of last contribution
year.
- When a "last contribution year" was shared by several notices, I sorted
those between each other in descending "first contribution year" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Olivier Martin <olivier.martin@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17582 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Evan Lloyd
Laszlo Ersek
Linn Crosetto
Jordan Justen
Dandan Bi
Shannon Zhao
Star Zeng
Mark Rutland
Heyi Guo
Olivier Martin
Jiaxin Wu
Roy Franz