This adds the .dsc and .fdf descriptions to build a UEFI image that
is bootable by a Xen guest on 64-bit ARM (AArch64)
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16981 6f19259b-4bc3-4df7-8a09-765794883524
This patchs adds support to VirtFdtDxe for the Xen DT node which
contains the base address of the Grant Table. This data is communicated
to XenBusDxe using a XENIO_PROTOCOL instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16980 6f19259b-4bc3-4df7-8a09-765794883524
This implements a dummy RealTimeClockLib for Xen, as there is no
guest interface to access the time kept by Xen that can be shared
between UEFI and the OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16977 6f19259b-4bc3-4df7-8a09-765794883524
Add a ArmPlatformLib instance that can deal with the self relocation
and truly dynamic discovery of system RAM base and size.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16964 6f19259b-4bc3-4df7-8a09-765794883524
Allow the use of patchable PCDs for gArmTokenSpaceGuid.PcdFvBaseAddress
and gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
by moving them from the [FixedPcd] to the [Pcd] section in the INF file of
PlatformPeiLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16963 6f19259b-4bc3-4df7-8a09-765794883524
This implements a MemoryInitPeiLib instance that differs from the
stock ArmPlatformPkg version only in the fact that it does not remove
the memory used by the flash device (FD). The reason is that, when using
PrePi, the DXE core is started immediately and never returns so there is
no reason to preserve any of the memory that the flash device occupied
originally, and it is preferable to release is so that the OS loader
can reuse it. This is especially important for the relocatable PrePi
configuration, which is aimed at being launched from a boot loader that
itself adheres to the Linux arm64 boot protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martn@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16962 6f19259b-4bc3-4df7-8a09-765794883524
This patch introduces a relocatable PrePi, which can execute
from arbitrary offsets in RAM. This is intendend to be run
from a boot loader which passes a description of the actual
platform in a device tree, for instance.
This module is based on the PrePi implementations residing under
ArmPlatformPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16961 6f19259b-4bc3-4df7-8a09-765794883524
Our primary user QEMU/mach-virt presents us with a FDT blob padded
to 64 KB with plenty of room to set additional properties. However,
in the general case, we should only add properties after making sure
there is enough room available.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16960 6f19259b-4bc3-4df7-8a09-765794883524
Instead of using a dynamic PCD, store the device tree address in a HOB
so that we can also run under a configuration that does not support
dynamic PCDs.
This also adds MemoryAllocationLib to the [LibraryClasses] section of
ArmVirtualizationPlatformLib/ArmVirtualizationPlatformLib.inf, as this
dependency was formerly satisfied transitively through one of the
library dependencies that were dropped.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16959 6f19259b-4bc3-4df7-8a09-765794883524
This is partially motivated by the desire to use PrePi in a virt
environment, and in that configuration, ArmPlatformInitializeSystemMemory()
is never called. But actually, this is a more suitable place anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16958 6f19259b-4bc3-4df7-8a09-765794883524
To allow a runtime self relocating PrePi instance to discover the base
address of the device tree at runtime, allow the use of a patchable PCD
for gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress.
We will not be using the build time patch tool in this case, but using
a patchable PCD will make the build system aware that its value is not
a compile time constant.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16957 6f19259b-4bc3-4df7-8a09-765794883524
This adds support for detecting the presence of a GICv3 interrupt
controller from the device tree, and recording its distributor and
redistributor base addresses in their respective PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16956 6f19259b-4bc3-4df7-8a09-765794883524
This moves the reference to gArmTokenSpaceGuid.PcdFdBaseAddress
from the [FixedPcd] to the [Pcd] section in the INF file of
PrePiArmPlatformGlobalVariableLib so that its users may choose
to use a patchable PCD instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16955 6f19259b-4bc3-4df7-8a09-765794883524
The DT binding for the ARM generic timer describes the secure,
non-secure, virtual and hypervisor timer interrupts, respectively.
However, under virtualization, only the virtual timer is usable, and
the device tree may omit the hypervisor timer interrupt. (Other timer
interrupts cannot be omitted simply due to the fact that the virtual
timer is listed third)
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16953 6f19259b-4bc3-4df7-8a09-765794883524
Juno R1 can run in two configurations:
- A57x2
- A57x2-A53x4
The Device Tree tell Linux which configuration has been selected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16942 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
The MIDR register of the CPU on which the UEFI firmware is running on
is used to infer if the platform is a Juno r0 or a Juno r1. The right
device path to the platform FDT is then stored in the
"gEmbeddedTokenSpaceGuid.PcdFdtDevicePaths" dynamic PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16939 6f19259b-4bc3-4df7-8a09-765794883524
Remove the installation of the FDT for Juno into the UEFI Configuration
Table from the Juno specific DXE driver. Use the FdtPlatformDxe driver to
do it instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16938 6f19259b-4bc3-4df7-8a09-765794883524
There are three FVP variants for the Base and Foundation models:
- model with GICv2 legacy memory map (same location as the Versatile Express model)
- model with GICv2 and Base model memory map
- model with GICv3 and Base model memory map
The new code detects the variants to load the appropriate device tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16932 6f19259b-4bc3-4df7-8a09-765794883524
Add a function to ArmVExpressDxe to identify the current platform we
are running on. This includes ARM32 and AArch64 models and hardware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16931 6f19259b-4bc3-4df7-8a09-765794883524
- 'earlycon' is the new name for 'earlyprintk'
- Support Linux EFI stub by default
- The command line is expected to be in unicode when
booting an EFI application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16928 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the build error:
Error #188-D: enumerated type mixed with another type
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16927 6f19259b-4bc3-4df7-8a09-765794883524
Detect the video displays dynamically, and add them to the console and
error output variables.
Add a short-form, "wild card" USB_CLASS_DEVICE_PATH to the console input
variable, which causes the USB keyboard to be handled automatically.
Add the fixed location serial console to all of the console input, console
output, and error output variables.
This patch enables QEMU users to drop "addr=..." PCI address
specifications from the -device options (or to use whatever addresses they
like). For example, the following works:
-device VGA \
\
-device ich9-usb-ehci1,multifunction=on,id=ehci \
-device ich9-usb-uhci1,multifunction=on,masterbus=ehci.0,firstport=0 \
-device ich9-usb-uhci2,multifunction=on,masterbus=ehci.0,firstport=2 \
-device ich9-usb-uhci3,multifunction=on,masterbus=ehci.0,firstport=4 \
-device usb-kbd,bus=ehci.0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16924 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we remove all dependencies on ARM BDS libraries. We also
remove empty and/or unneeded functions, includes, etc.
PlatformIntelBdsLib "goes back to basics" temporarily -- there are no
consoles configured, and it's practically not possible to interact with
the user interface. Bisection remains available in the sense that
"ArmVirtualizationQemu.dsc" continues to build and should boot preexistent
boot options, but user interaction does regress temporarily.
The reason for this is that it's preferable to keep this patch and the
next one separate for readability's sake -- they amount to a rewrite from
scratch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16923 6f19259b-4bc3-4df7-8a09-765794883524
Similarly to the previous patch, we can now multiplex input from the USB
keyboard.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as
well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set
PcdDefaultConOutPaths such that the console output is multiplexed to the
video window as well. (Our platform BDS lib doesn't (yet) locate the VGA
device automatically.)
OvmfPkg/PlatformDxe is included too; it allows users to select a video
resolution. (Note that PcdSetupVideoHorizontalResolution and
PcdSetupVideoVerticalResolution are independent; see git commit 848834cb
(SVN r16311) for explanation.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
In the following call chain:
PlatformBdsPolicyBehavior()
PlatformBdsConnectConsole()
InitializeConsolePipe() x 3
BdsConnectDevicePath() [ArmPkg/Library/BdsLib/BdsFilePath.c]
the three InitializeConsolePipe() function calls pass through
- (&gST->ConsoleOutHandle, &gST->ConOut),
- (&gST->ConsoleInHandle, &gST->ConIn),
- (&gST->StandardErrorHandle, &gST->StdErr)
to BdsConnectDevicePath(), in ArmPkg's BdsLib.
At least when more than one console device paths are specified in the
ConIn / ConOut / ErrOut variables, the above resuls in:
- unchanged protocol interfaces (ConOut, ConIn, StdErr) in the system
table (because ConSplitterDxe installs its non-NULL interfaces first),
- but, changed handles in the system table.
This effectively separates the handle fields in the system table from the
protocol interfaces in the same that should always be associated with the
handles. The end result is that clients using the handles break (splitting
/ multiplexing doesn't work for them), while clients directly using the
protocol interfaces work.
Therefore, do not attempt to connect consoles separately. ConSplitterDxe
is dispatched before PlatformBdsPolicyBehavior() is called (the latter
happens in the BDS phase), and ConSplitterDxe installs virtual handles and
protocol interfaces for input / output / error.
BdsLibConnectAll() covers all devices, including consoles; as those
consoles are connected, ConPlatformDxe and ConSplitterDxe pick them up
nicely as "slaves". We just need to make sure that the variables are set
first, for the variables -> ConPlatformDxe -> ConSplitterDxe dependency
chain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16912 6f19259b-4bc3-4df7-8a09-765794883524
If there is a PCI host, then PCI enumeration (which happens inside
BdsLibConnectAll()) blocks ACPI table installation (correctly). Make sure
we install ACPI tables before trying to direct-boot a QEMU kernel.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16911 6f19259b-4bc3-4df7-8a09-765794883524
Beyond including the foundational drivers in the DSC and FDF files, we
enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device
path translation for PCI devices.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
The BarExisted() function in
"MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c" raises the TPL to
TPL_HIGH_LEVEL before accessing PCI config space.
The PciExpressLib instance under "MdePkg/Library/BasePciExpressLib" --
serving the PCI config space access -- calls
PcdGet64(PcdPciExpressBaseAddress) in turn, for each such call.
The PcdGet64() function, when issued at TPL_HIGH_LEVEL, triggers an
ASSERT(). PcdGet64() is based on a protocol in this UEFI phase, and
protocol handler services are not allowed above TPL_NOTIFY (see Table 23
"TPL Restrictions" in the UEFI spec).
Clone the library, and in a new constructor, cache the PCD in a global
variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16909 6f19259b-4bc3-4df7-8a09-765794883524
When there are no devices connected to the root bridge, no resources are
needed. GetProposedResources() currently considers this an invalid
condition (the PI spec doesn't regulate it).
Emitting an empty set of EFI_ACPI_ADDRESS_SPACE_DESCRIPTORs, followed by
the required EFI_ACPI_END_TAG_DESCRIPTOR, allows
PciHostBridgeResourceAllocator() [MdeModulePkg/Bus/Pci/PciBusDxe/PciLib.c]
to advance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16908 6f19259b-4bc3-4df7-8a09-765794883524
According to Volume 5 of the PI spec, 10.8.2 PCI Host Bridge Resource
Allocation Protocol, SubmitResources(),
It is considered an error if no resource requests are submitted for a
PCI root bridge. If a PCI root bridge does not require any resources, a
zero-length resource request must explicitly be submitted.
Under MdeModulePkg/Bus/Pci/PciBusDxe/, we have:
PciHostBridgeResourceAllocator() [PciLib.c]
ConstructAcpiResourceRequestor(..., &AcpiConfig) [PciEnumerator.c]
PciResAlloc->SubmitResources(..., &AcpiConfig)
ASSERT_EFI_ERROR ()
If ConstructAcpiResourceRequestor() finds no resources to request (for
example because no PCI devices are on the root bridge), it places a
zero-length EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR followed by an
EFI_ACPI_END_TAG_DESCRIPTOR in "AcpiConfig"; satisfying the PI spec.
However, PciHostBridgeDxe's SubmitResources() function does not expect
such input; the following part of the code rejects it:
switch (Ptr->ResType) {
case 0:
//
// Check invalid Address Sapce Granularity
//
if (Ptr->AddrSpaceGranularity != 32) {
return EFI_INVALID_PARAMETER;
}
Skip EFI_ACPI_ADDRESS_SPACE_DESCRIPTORs with zero AddrLen early. Also,
allow PciHostBridgeResourceAllocator() to proceed to the AllocateResources
phase by setting "ResourceSubmited" to TRUE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16907 6f19259b-4bc3-4df7-8a09-765794883524
This is our MMIO space map:
> GCD:AddMemorySpace(Base=0000000010000000,Length=000000002EFF0000)
> GcdMemoryType = MMIO
> Capabilities = 0000000000000001
> Status = Success
> GCDMemType Range Capabilities Attributes
> ========== ================================= ================ ================
> NonExist 0000000000000000-0000000003FFFFFF 0000000000000000 0000000000000000
> MMIO 0000000004000000-0000000007FFFFFF C000000000000001 8000000000000001
NorFlashDxe adds this, but does not allocate it.
> NonExist 0000000008000000-000000000900FFFF 0000000000000000 0000000000000000
> MMIO 0000000009010000-0000000009010FFF C000000000000001 8000000000000001
Added by RealTimeClockRuntimeDxe, but also not allocated.
> NonExist 0000000009011000-000000000FFFFFFF 0000000000000000 0000000000000000
> MMIO 0000000010000000-000000003EFEFFFF C000000000000001 0000000000000000
Added by ourselves.
> NonExist 000000003EFF0000-000000003FFFFFFF 0000000000000000 0000000000000000
> SystemMem 0000000040000000-00000000BFFFFFFF 800000000000000F 0000000000000008*
> NonExist 00000000C0000000-0000FFFFFFFFFFFF 0000000000000000 0000000000000000
In the EfiPciHostBridgeAllocateResources phase, we allocate memory BARs
bottom up, from whichever MMIO range comes first and has room left.
Unfortunately, this places memory BARs into MMIO ranges that belong to
other devices. (Arguably, their respective drivers should not just add,
but immediately allocate those ranges as well.)
(
This problem is not seen in OVMF / PcAtChipsetPkg, because there we
allocate bottom-up from the range
[max(2GB, top-of-low-RAM), 0xFC000000).
(See the MMIO resource descriptor HOB created in MemMapInitialization()
[OvmfPkg/PlatformPei/Platform.c].)
That MMIO range fits in the static [2GB, 4GB) aperture given in
"mResAperture" in PcAtChipsetPkg/PciHostBridgeDxe; plus other MMIO
ranges (IO-APIC, HPET, LAPIC, flash chip) are higher than 0xFC000000.
Hence the bottom-up BAR allocation in OvmfPkg always finds the right
MMIO range first.
)
In ArmVirtualizationPkg/PciHostBridgeDxe we can solve the problem by
working our way downwards from the top of our own aperture.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16906 6f19259b-4bc3-4df7-8a09-765794883524
Currently we allocate IO BARs bottom-up in the
EfiPciHostBridgeAllocateResources phase of the enumeration.
> GCD:AddIoSpace(Base=0000000000000000,Length=0000000000010000)
> GcdIoType = I/O
> Status = Success
> GCDIoType Range
> ========== =================================
> I/O 0000000000000000-000000000000FFFF
Because the IO aperture is based at zero, the first allocation happens to
get the zero address. However, a zero address for a PCI BAR is considered
unmapped; see eg.:
- <http://www.pcisig.com/reflector/msg00459.html>,
- the (new_addr == 0) part in QEMU, pci_bar_address() [hw/pci/pci.c]:
new_addr = pci_get_long(d->config + bar) & ~(size - 1);
last_addr = new_addr + size - 1;
/* Check if 32 bit BAR wraps around explicitly.
* TODO: make priorities correct and remove this work around.
*/
if (last_addr <= new_addr || new_addr == 0 || last_addr >= UINT32_MAX)
{
return PCI_BAR_UNMAPPED;
}
We can avoid this problem by allocating top-down in the IO aperture.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16905 6f19259b-4bc3-4df7-8a09-765794883524
Quite non-intuitively, we must allow guest-side writes to emulated PCI
MMIO regions to go through the CPU cache, otherwise QEMU, whose accesses
always go through the cache, may see stale data in the region.
This change makes no difference for QEMU/TCG, but it is important for
QEMU/KVM, at the moment.
Because gDS->SetMemorySpaceAttributes() is ultimately implemented by
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes() -- see
"MdeModulePkg/Core/Dxe/Gcd/Gcd.c" and "ArmPkg/Drivers/CpuDxe/" -- we add
the CPU architectural protocol to the module's DepEx.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16904 6f19259b-4bc3-4df7-8a09-765794883524
VirtFdtDxe parses the following address space properties from the DTB (and
saves them in PCDs) :
ProcessPciHost: Config[0x3F000000+0x1000000)
Bus[0x0..0xF]
Io[0x0+0x10000)@0x3EFF0000
Mem[0x10000000+0x2EFF0000)@0x0
In order to allow PCI enumeration to allocate IO and MMIO resources from
the above ranges for devices, we must add the ranges to the Global
Coherency Domain.
There are two ways for that:
- building resource descriptor HOBs in the HOB producer phase (basically,
PEI), and letting the DXE core process them,
- calling gDS->AddIoSpace() and gDS->AddMemorySpace() during DXE.
We opt for the second method for simplicity.
In the address space maps, the corresponding ranges change from
"nonexistent" to "IO" and "MMIO", from which the gDS->AllocateIoSpace()
and gDS->AllocateMemorySpace() services can later allocate PCI BARs.
GCD:AddIoSpace(Base=0000000000000000,Length=0000000000010000)
GcdIoType = I/O
Status = Success
GCDIoType Range
========== =================================
-> I/O 0000000000000000-000000000000FFFF
GCD:AddMemorySpace(Base=0000000010000000,Length=000000002EFF0000)
GcdMemoryType = MMIO
Capabilities = 0000000000000001
Status = Success
GCDMemType Range Capabilities Attributes
========== ================================= ================ ================
NonExist 0000000000000000-0000000003FFFFFF 0000000000000000 0000000000000000
MMIO 0000000004000000-0000000007FFFFFF C000000000000001 8000000000000001
NonExist 0000000008000000-000000000900FFFF 0000000000000000 0000000000000000
MMIO 0000000009010000-0000000009010FFF C000000000000001 8000000000000001
NonExist 0000000009011000-000000000FFFFFFF 0000000000000000 0000000000000000
-> MMIO 0000000010000000-000000003EFEFFFF C000000000000001 0000000000000000
NonExist 000000003EFF0000-000000003FFFFFFF 0000000000000000 0000000000000000
SystemMem 0000000040000000-00000000BFFFFFFF 800000000000000F 0000000000000008*
NonExist 00000000C0000000-0000FFFFFFFFFFFF 0000000000000000 0000000000000000
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16903 6f19259b-4bc3-4df7-8a09-765794883524
Set gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize to 16, which determines the
maximum "I/O address width".
This ensures, through the BuildCpuHob() call in
"ArmPkg/Drivers/CpuPei/CpuPei.c", that the inital I/O Space Map will
consist of a 16-bit wide "splittable" entry, when the DXE core starts (see
CoreInitializeGcdServices() in "MdeModulePkg/Core/Dxe/Gcd/Gcd.c"):
GCD:Initial GCD I/O Space Map
GCDIoType Range
========== =================================
NonExist 0000000000000000-000000000000FFFF
Otherwise this range would have size 0, and (since it could not be split)
any gDS->AddIoSpace() calls would fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16902 6f19259b-4bc3-4df7-8a09-765794883524
The RootBridgeIoCheckParameter() function currently relies on the range
limit being of the form (2^n - 1). This assumption is not necessarily
true; handle the general case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16901 6f19259b-4bc3-4df7-8a09-765794883524
There is no IO space on ARM, and there are no special instructions that
access it. QEMU emulates the IO space for PCI devices with a special MMIO
range. We're ready to use it at this point, we just have to switch the
Io(Read|Write)(8|16|32) primitives to their MMIO counterparts, because in
"MdePkg/Library/BaseIoLibIntrinsic/IoLibArm.c", the IO primitives
correctly ASSERT (FALSE).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16900 6f19259b-4bc3-4df7-8a09-765794883524
Unlike the one in PcAtChipsetPkg, our PciHostBridgeDxe module must handle
address space translation. IO addresses expressed in the respective
aperture are mapped to a different base in CPU address space.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16899 6f19259b-4bc3-4df7-8a09-765794883524
If VirtFdtDxe found no PCI host in the DTB, then the config space base
address will be left at zero -- the default is set in the DSC --, and we
should exit PciHostBridgeDxe immediately.
This causes gEfiPciRootBridgeIoProtocolGuid not to be installed, which in
turn prevents MdeModulePkg/Bus/Pci/PciBusDxe from binding (see
PciBusDriverBindingSupported()).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16898 6f19259b-4bc3-4df7-8a09-765794883524
Our PciHostBridgeDxe module creates one root bridge on the one and only
host bridge. The resource apertures of the root bridge (bus range, IO
space, MMIO space) are configured with the "mResAperture" array, which at
the moment carries static values inherited from PcAtChipsetPkg.
Set the array as first thing from the PCDs that we parsed from the device
tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16897 6f19259b-4bc3-4df7-8a09-765794883524
The Enhanced Configuration Access Mechanism provides access to 4096
register bytes per PCIe B/D/F. The MAX_PCI_REG_ADDRESS macro that we're
changing here is used by RootBridgeIoCheckParameter() for verifying config
space boundaries in EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() and
.Write().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16896 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg/Bus/Pci/PciBusDxe depends on
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL and
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. Here we clone the driver that produces
these from PcAtChipsetPkg, with the following immediate changes:
- a new FILE_GUID is generated;
- the assembly-language Ia32 / X64 specific IoFifo "accelerators" are not
copied, and their client code (which would be dead code anyway) is
removed;
- UNI files are not copied: they are used in conjunction with the UEFI
Packaging Tool (UPT), but the driver under ArmVirtualizationPkg will not
be part of UDK.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16895 6f19259b-4bc3-4df7-8a09-765794883524
This setting makes OvmfPkg/AcpiPlatformDxe not wait for PCI
enumeration to complete before installing ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16886 6f19259b-4bc3-4df7-8a09-765794883524
The FeaturePcd gArmTokenSpaceGuid.PcdArmGicV3WithV2Legacy was not
defined in the correct section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16881 6f19259b-4bc3-4df7-8a09-765794883524
ARM GICv3 specification introduces some new components and registers.
This patch adds their definitions.
The most important GICv3 component is the GIC Redistributor. It supports
LPIs (Locality-specific peripheral Interrupt), 8+ CPU configuration.
Some GIC distributor registers have moved to the GIC redistributor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16872 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
Roughly, there are two ways to "measure ticks" in UEFI:
- the SetTimer() boot service, which sets up a one-shot or periodic event
callback, and takes the interval length in units of 100ns,
- the Stall() boot service, which stalls the caller (but does not yield
the CPU) for the interval specified. The interval is taken as a number
of microseconds.
If the platform in question also follows the PI (Platform Init)
specification, then it is recommended to implement the above UEFI services
on top of the following DXE Architectural Protocols (described in PI
Volume 2):
- Timer Architectural Protocol:
"Used to set up a periodic timer interrupt using a platform specific
timer, and a processor-specific interrupt vector. This protocol enables
the use of the SetTimer() Boot Service. [...]"
- Metronome Architectural Protocol:
"Used to wait for ticks from a known time source in a platform. This
protocol may be used to implement a simple version of the Stall() Boot
Service. [...]"
Edk2 in general, and ArmVirtualizationQemu in particular, follow the above
pattern.
SetTimer() works correctly. The underlying Timer Architectural Protocol is
provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal
function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency.
Ultimately it boils down to reading the CNTFRQ_EL0 register.
The correct behavior of SetTimer() can be observed for example:
- in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"),
- in the Intel BDS front page countdown
("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c").
However, Stall() doesn't work correctly. The underlying Metronome
Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which
further delegates the job to the TimerLib library class. That in turn is
resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which
(finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz".
In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas,
that's incorect for:
- both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in
"target-arm/internals.h"),
- and KVM (where the host's virtualized timer can tick at 50 MHz, for
example).
Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as
well.
The change can be tested with eg. the following callers of Stall():
- the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on
Stall(),
- the UEFI shell command "stall" also uses Stall(). (Time it with a
stopwatch.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
pl011 releases earlier than r1p5 has a fifo depth of 16 bytes, whereas
version r1p5 upwards has a fifo depth of 32 bytes. The pl011 driver was
hardwired to 32 byte depth, causing dropped characters on some platforms
(including default settings on FVP Base and Foundation models).
Update driver to select 16 or 32 on port initialization by checking the
component revision.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16656 6f19259b-4bc3-4df7-8a09-765794883524
Fix the check to prevent any reading past the end of the nor flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16655 6f19259b-4bc3-4df7-8a09-765794883524
This support makes the Juno UEFI Firmware to look into the Firmware Volume
for the ACPI Tables. But it does not provide the ACPI Tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16651 6f19259b-4bc3-4df7-8a09-765794883524
A number of tools depend on passing the kernel image, the initial ramdisk,
and the kernel command line to the guest on the QEMU command line (options
-kernel, -initrd, -append, respectively). At the moment, these QEMU
options work, but the guest kernel loaded this way is launched by a
minimal binary firmware that is dynamically composed by QEMU. As a
consequence, such a kernel has no UEFI environment.
This patch enables -kernel, -initrd, -append to work on top of the
ArmVirtualizationQemu firmware build. The approach it takes is different
from how the same functionality is implemented in OvmfPkg.
OvmfPkg contains a full-fledged Linux boot loader (see
"OvmfPkg/Library/PlatformBdsLib/QemuKernel.c" and
"OvmfPkg/Library/LoadLinuxLib/"). OVMF's LoadLinuxLib sets up the required
kernel environment in a sophisticated way (including x86-specific
artifacts like the GDT), calls ExitBootServices() itself (for legacy
kernels without EFI handover protocol), and jumps to the kernel (using x86
assembly).
In ArmVirtualizationPkg's PlatformIntelBdsLib, we require the kernel being
loaded to have an EFI stub -- that is, to be a genuine UEFI application.
(The EFI stub is not an additional burden for guest kernels -- the EFI
stub is a hard requirement anyway because it needs to process the DTB
heavily:
- it removes memory nodes,
- it removes memreserve entries,
- it adds UEFI properties to the "chosen" node,
- it calculates and installs virt-to-phys mappings with
SetVirtualAddressMap() in a way that enables kexec [planned].
Kudos to Ard Biesheuvel for summarizing the above.)
An EFI-stubbed Linux guest kernel can be loaded with plain
gBS->LoadImage(). The EFI stub will look up its own
EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL instance (ie. the device path where
it has been loaded from), and it will locate the initial ramdisk named by
the "initrd" command line parameter as a *sibling file* on the same
device.
The initrd file is then loaded using the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.
This approach enables the EFI stub to load the initial ramdisk from normal
EFI System Partitions, from remote PXE/TFTP directories -- and it enables
us to provide the initrd from memory as well.
In this patch:
- We download the kernel image, the initrd image, and the kernel command
line, using QEMU's fw_cfg interface.
- We create a read-only EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instance that has
just a root directory, with the three downloaded files in it.
- The handle that carries the simple file system has a single-node
VenHw(...) device path (not counting the terminator node).
- We load the EFI-stubbed kernel (which is a UEFI application) with
gBS->LoadImage(), passing "VenHw(...)/kernel" as device path. This
causes gBS->LoadImage() to call back into our filesystem.
- Appended to the downloaded command line, we pass "initrd=initrd" to the
EFI stub.
- Once the EFI stub is running, it loads the initial ramdisk from the
"sibling" device path "VenHw(...)/initrd", also calling back into our
filesystem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16578 6f19259b-4bc3-4df7-8a09-765794883524
The default value of this PCD (in "IntelFrameworkModulePkg.dec")
identifies the "old shell" from EdkShellBinPkg. Our build includes the
"new" shell from ShellBinPkg/UefiShell/UefiShell.inf; let's specify the
FILE_GUID of that.
Otherwise, no boot option will be generated for the Shell application.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16577 6f19259b-4bc3-4df7-8a09-765794883524
We have all the required pieces in place. Let's call
SetBootOrderFromQemu() in PlatformBdsPolicyBehavior().
We disable OFW-to-UEFI device path fragment translation for virtio-pci,
and enable it only virtio-mmio at this time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16576 6f19259b-4bc3-4df7-8a09-765794883524
Installing VenHw() device paths with this GUID, for the virtio-mmio
transports that we detect, enables other modules to recognize those
VenHw() nodes. (Note that the actual value doesn't change.)
In addition, to avoid reusing GUIDs in unrelated contexts, detach the
driver's FILE_GUID from its previous value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16573 6f19259b-4bc3-4df7-8a09-765794883524
In PlatformBdsPolicyBehavior() we should follow the same pattern as in
OvmfPkg's: after the consoles are connected,
- connect all drivers and devices,
- enumerate all boot options,
- enter the Intel BDS FrontPage if the user presses a key different from
Enter.
We set the countdown to 3 seconds, similarly to the timeout that we
specify for ARM BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16569 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch(es) we'll customize the PlatformBdsLib instance used by
ArmVirtualizationQemu.dsc. Let's clone it first verbatim from
ArmPlatformPkg/Library/PlatformIntelBdsLib, changing only its FILE_GUID.
(Also, coding style errors like "missing space before open parenthesis"
and "missing space after comma or semicolon" have been cleaned up.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16568 6f19259b-4bc3-4df7-8a09-765794883524
After reviewing OvmfPkg's use of its own QemuFwCfgLib instances, it is
clear that its only pre-DXE fw_cfg dependency concerns S3 support (the
QemuFwCfgS3Enabled() call in "PlatformPei/Platform.c").
For ARM guests, S3 is in the distant future, but we can see several
shorter term applications for fw_cfg that all reside in DXE:
- controlling boot order (to be implemented in PlatformBdsLib for Intel
BDS),
- supporting -kernel / -initrd / -append boot on QEMU (to be implemented
in PlatformBdsLib for Intel BDS, similarly),
- loading and linking ACPI tables,
- installing SMBIOS tables.
Therefore it makes sense to add a simple MMIO-based fw_cfg client library
to ArmVirtualizationPkg that for the moment is only available to
DXE_DRIVER modules.
Because MMIO accesses are costly on KVM/ARM, InternalQemuFwCfgReadBytes()
accesses the fw_cfg data register in full words. This speeds up transfers
almost linearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16567 6f19259b-4bc3-4df7-8a09-765794883524
Qemu's firmware configuration interface for ARM consists of two MMIO
registers, a 16-bit selector, and a 64-bit data register that allows the
guest to transfer data with 8, 16, 32, and 64-bit wide accesses. Parse the
base address from the DTB, and expose the registers to the rest of DXE via
dynamic PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16566 6f19259b-4bc3-4df7-8a09-765794883524
The original patch was assuming PathLib moved to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16522 6f19259b-4bc3-4df7-8a09-765794883524
Rework the downloading of an image from a TFTP server to do not
depend on any "PXE specific" setting of the DHCP server.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16516 6f19259b-4bc3-4df7-8a09-765794883524
Device Paths were not freed after calling
BDS_LOAD_OPTION_SUPPORT.CreateDevicePathNode()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16514 6f19259b-4bc3-4df7-8a09-765794883524
Rework the setting of information about a file, in particular
file resizing, file renaming and the returned error codes in case
of error. This rework has implied a rework of the read, write, close
and flush functions.
To strickly separate what has been actually written to the media (flushed)
from what has not been written when a file is open, an "Info" field has
been added to the description of a file.
The field is used to store the modifications done to the file by the
means of SetInfo() like the change of the name or of the size. Such
changes are written to the media only when a flush occurs.
When a file is open, the information pointed to by the "Info" field is
always up-to-date. This is not the case of the information stored in
the "HwDescription" of the file description which from now is just a
mirror of what is written on the media.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16511 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
All the required pending BaseTools patches have been merged.
This patch is not required anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16275 6f19259b-4bc3-4df7-8a09-765794883524
ArmInvalidateInstructionAndDataTlb() was doing the same thing as
ArmInvalidateTlb().
Both invalidate Data and Instruction TLBs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16253 6f19259b-4bc3-4df7-8a09-765794883524
Rework the PL011UartGetControl() function removing a TODO by the way.
Update of the header comment blocks of (PL011Uart|SerialPort)GetControl() functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16252 6f19259b-4bc3-4df7-8a09-765794883524
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
Use the command to load and start a ARM Executable File from mass storage.
This is basically just an ELF file. The program is copied to memory and
the Entrypoint is called. Control is not expected to return back to the
Shell. This has only been tested on AArch64 with a limited set of AXF
binaries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16247 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Olivier Martin
Ronald Cron
Laszlo Ersek
Jordan Justen
Leif Lindholm
Scott Duplichan
Harry Liebel