2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
1.It keeps the rule that Leading zero’s compression(Yes/Not) need to be consistent throughout the whole IP address.
2.It also fixes some issue to recognize some invalid representation.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10777 6f19259b-4bc3-4df7-8a09-765794883524
1. add library function NetLibDetectMedia to NetLib for media detection
2. update MnpDxe to periodically poll for media status update and check for media status before packet transmit
3. update Ip4Dxe to return ModeData using Mnp->GetModeData()
4. update IScsiDxe to check for media status before try to do DHCP and session login
5. update UefiPxeBcDxe to check for media status before PXE start
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9919 6f19259b-4bc3-4df7-8a09-765794883524
1. add some comments to clarify AsciiStrDecimalToUintn() can help filtering un-decimal characters.
2. change the condition judgment to “Index < 15” rather than (Index + 1 ) <16.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9803 6f19259b-4bc3-4df7-8a09-765794883524
1. Add GLOBAL_REMOVE_IF_UNREFERENCED to all globals
2. Update NTOHL and NTOHS to be BaseLib func SwapBytes32/SwapBytes16
3. Remove duplicate NET_SWAP_SHORT (to use NTOHS instead)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9648 6f19259b-4bc3-4df7-8a09-765794883524
1. Update NetLib to a combined NetLib support dual network stack:
1) Add Network Debug facility for IPv4 stack.
2) Extend the library APIs to support IPv6 stack:
a. NetIp6IsUnspecifiedAddr
b. NetIp6IsLinkLocalAddr
c. NetIp6IsNetEqual
d. NetLibCreateIPv6DPathNode.
e. NetIp6PseudoHeadChecksum
f. NetIp6IsValidUnicast
3) Update the structure definitions:
a. Update NET_BUF to add EFI_IP6_HEADER and EFI_UDP_HEADER
b. Add NET_IP6_PSEUDO_HDR
4) Update Ip4IsUnicast to NetIp4IsUnicast
2. Update the impacted modules to adopt the combined NetLib.
3. Clean up coding style errors in all network drivers and libraries.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9391 6f19259b-4bc3-4df7-8a09-765794883524
2. Update Dhcp4 and Mtftp4 driver to adopt the combined UdpIo.
3. Clean up coding style problems in combined IpIoLib/NetLib. Update Tcp4 and Udp4 to adopt the changes.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9382 6f19259b-4bc3-4df7-8a09-765794883524
1. Add new interface Ip6IsValidUnicast
2. Add new enum IP6_EXTENSION_HEADER_TYPE
3. Add new structure IP6_ICMP_* definitions
4. Update structure from EFI_UDP4_HEADER to EFI_UDP_HEADER
5. Add new macro EFI_IP6_EQUAL
IpIoLib:
1. Update the IpIoLib to a combined library for both v4 and v6 network stack
2. Fix a bug in IpIoIcmpHandler() - for IPv6 packet, the header length is variable (basic header + extension) rathar than fixed length.
The fix removes the IPv6 header fields and notify the user with the ICMPv6 packet only containing payload.
TcpDxe/UdpDxe:
1. Update to adapt the new combined IpIoLib
2. Add gEfiIp6ProtocolGuid/gEfiIp6ServiceBindingProtocolGuid to [Protocols] in INF file since the Ip6.h is included in IpIoLib and NetLib.
3. Pass the TCP4/UDP4 UEFI SCT test on NT32 platform.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9374 6f19259b-4bc3-4df7-8a09-765794883524
2. moved NicIp4ConfigVariableGuid to Include/Guid/NicIp4ConfigNvData.h
3. updated Ip4ConfigDxe module to publish one setup page to Get/Set network parameters. Also, Ip4ConfgiDxe installed EFI HII Config Access protocol for each network devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8309 6f19259b-4bc3-4df7-8a09-765794883524
Remove //#include <Protocol/Ip4.h>
Remove #include <Library/UefiLib.h>
Fix one function header description error
Fix filer header
Fix function header
Fix return status issues
Fix in out issues
Fix no Boolean expression issues
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7096 6f19259b-4bc3-4df7-8a09-765794883524
Move IsHexDigit, BufToHexString, HexStringToBuf from BaseLib to MdeModulePkg IfrSupportLib. The reason is:
1) IsHexDigit function provides the logic to check Hex Digit and convert it to Decimal value, which is required by IScsi LUN and HII user input. But this logic is not provided by any functions in MdeLib. So, it can't be deleted. It is moved to IfrSupportLib.
2) BufToHexString function converts a array of buffers to hex string. If the buffer length is less than sizeof (UINT64), it can be directly replaced by UnicodeValueToString(). But HII modules may use BufToHexString to convert the buffers whose length > sizeof (UINT64). For example:
.\MdeModulePkg\Universal\HiiDatabaseDxe\ConfigRouting.c line 201, 1148
.\Universal\SetupBrowserDxe\Setup.c line line 1457, 1503
Like this case, it is not easy to use UnicodeValueToString to replace BufToHexString. So, BufToHexString is still kept. Because such usages are in HII modules, this function is moved to IfrSupportLib.
3) HexStringToBuf is moved to IfrSupportLib. The reason is similar to BufToHexString.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6782 6f19259b-4bc3-4df7-8a09-765794883524
2. Add DpcDxe module and DxeDpcLib module in MdeModulePkg
3. Port network stack module to use DPC.
4. Use MIN, and MAX defined in MdePkg to replace NET_MIN and NET_MAX.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4307 6f19259b-4bc3-4df7-8a09-765794883524
sfu5
tye1
niruiyu
xdu2
hhuan13
rsun3
jjin9
lgao4
vanjeff
hhtian
geekboy15a
qianouyang
tye
mdkinney
ywu21
klu2
jji4
qwang12
qhuang8