since we manually make each entry a set(), just use defaultdict(set)
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the dict is not needed as BaseTools can check the set
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the function doesn't use self and can be static
defaultdict replaces dict and removes the dict initialization code
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
the variable is a string type since we just used .strip() on it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround for KVM timer
handling") removed the virtual timer handling quirk that cleared the
mask bit in the control register when enabling the timer, under the
assumption that only ancient KVM host implementations required it.
However, Julien reports that Xen also masks the timer interrupt in the
guest view of the timer control register, and therefore needs the same
quirk.
So let's reinstate it, but using a Xen specific implementation of the
timer support library, so that other virt platforms remain unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=937
In NvmeExpressPassthru.c near line 659:
Prp = NvmeCreatePrpList (
PciIo,
PhyAddr,
EFI_SIZE_TO_PAGES(Offset + Bytes) - 1,
&PrpListHost,
&PrpListNo,
&MapPrpList
);
if (Prp == NULL) {
goto EXIT;
}
Status is not set to an error code - Status is initialized to
EFI_SUCCESS, or set by a PciIo->Map to EFI_SUCCESS above this
code. This error path should set Status to an error code before
goto EXIT.
Change-Id: I8a5cdf981aa609534c205d3676395805ac60a003
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=933
We see UEFI spec is saying to use EfiBootServicesData for ESRT table.
UEFI 2.7 chapter 23.3:
The ESRT shall be stored in memory of type EfiBootServicesData.
And we see EsrtDxe is using AllocatePool for ESRT table, but
EsrtFmpDxe is using AllocateRuntimeZeroPool for ESRT table.
This patch updates code to use EfiBootServicesData for ESRT table
in EsrtFmpDxe.
Change-Id: I72a73e0cc0a37e429cc262d68eb284fb268cb5ef
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the new section for HTTPS Boot.
Changes in v2:
- Fixed the typos
- Added the command for p11-kit based on Laszlo's suggestion
- Also added the efisiglist command
- Elaborated how to create the customized cipher suite list
- Mentioned the changes in QEMU in the future based on Laszlo's
suggestion
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trivial typo fixes; update-crypto-policies URL fix]
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew J. Fish <afish@apple.com>
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.
This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.
Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case. There is also an unfortunate lack of control on the placement of
the framebuffer.
This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.
This change has no impact on current code, only enables the option
of build time reservation of framebuffers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add definitions for new display modes such as HD 720.
This has no effect on existing display drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.
If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.
NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms. Rather than have
divergent code, this build switch allows a simple, pragmatic solution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format
In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.
Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.
This change adds PcdGopPixelFormat to configure pixel format as
PixelRedGreenBlueReserved8BitPerColor or
PixelBlueGreenRedReserved8BitPerColor or
PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.
Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask. Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
LcdIdentify function does not currently check presence of HDLCD
controller.
Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clean up the leading comment and the prototype of
EfiBootManagerAddLoadOptionVariable():
- the function may modify Option on output, annotate the parameter with
OUT and update the documentation;
- "@retval EFI_STATUS" and "@retval Others" are not idiomatic
documentation, use @return instead;
- sync comment and prototype between lib instance and lib class header.
Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PcdRsa2048Sha256PublicKeyBuffer is referenced but not used in the
library, that makes me a little confusing.
Actually, the PublicKeyData should be from the caller of
AuthenticateFmpImage() as input parameter, for example
EdkiiSystemCapsuleLib.
This patch is to remove the PCD reference in this library instance
to be aligned with FmpAuthenticationLibPkcs7 that does not reference
PcdPkcs7CertBuffer.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Carsey, Jaben
Ard Biesheuvel
Star Zeng
Gary Lin
Leif Lindholm
Girish Pathak
Girish Pathak
Ruiyu Ni
Carsey, Jaben