While the alternative PEI-less SEC implementation in PrePi already
takes the EnableVFP PCD into account, the PrePeiCore code does not,
and so we may end up triggering synchronous exception when code
attempts to use FP or SIMD registers, which is permitted on AARCH64
by the spec.
So enable the VFP as early as feasible if the associated PCD is set.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib. Note that this means the hack to support warm
reboot by jumping to the SEC entry point with the MMU and caches off
is also no longer used, and can be removed as well, along with the PCD
PcdArmReenterPeiForCapsuleWarmReboot that was introduced for this
purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When downloading over TLS, each TLS message ("APP packet") is returned as
a (decrypted) fragment table by EFI_TLS_PROTOCOL.ProcessPacket().
The TlsProcessMessage() function in "NetworkPkg/HttpDxe/HttpsSupport.c"
linearizes the fragment table into a single contiguous data block. The
resultant flat data block contains both TLS headers and data.
The HttpsReceive() function parses the actual application data -- in this
case: decrypted HTTP data -- out of the flattened TLS data block, peeling
off the TLS headers.
The HttpResponseWorker() function in "NetworkPkg/HttpDxe/HttpImpl.c"
propagates this HTTP data outwards, implementing the
EFI_HTTP_PROTOCOL.Response() function.
Now consider the following documentation for EFI_HTTP_PROTOCOL.Response(),
quoted from "MdePkg/Include/Protocol/Http.h":
> It is the responsibility of the caller to allocate a buffer for Body and
> specify the size in BodyLength. If the remote host provides a response
> that contains a content body, up to BodyLength bytes will be copied from
> the receive buffer into Body and BodyLength will be updated with the
> amount of bytes received and copied to Body. This allows the client to
> download a large file in chunks instead of into one contiguous block of
> memory.
Note that, if the caller-allocated buffer is larger than the
server-provided chunk, then the transfer length is limited by the latter.
This is in fact the dominant case when downloading a huge file (for which
UefiBootManagerLib allocated a huge contiguous RAM Disk buffer) in small
TLS messages.
For adjusting BodyLength as described above -- i.e., to the application
data chunk that has been extracted from the TLS message --, the
HttpResponseWorker() function employs the following assignment:
HttpMsg->BodyLength = MIN (Fragment.Len, (UINT32) HttpMsg->BodyLength);
The (UINT32) cast is motivated by the MIN() requirement -- in
"MdePkg/Include/Base.h" -- that both arguments be of the same type.
"Fragment.Len" (NET_FRAGMENT.Len) has type UINT32, and
"HttpMsg->BodyLength" (EFI_HTTP_MESSAGE.BodyLength) has type UINTN.
Therefore a cast is indeed necessary.
Unfortunately, the cast is done in the wrong direction. Consider the
following circumstances:
- "Fragment.Len" happens to be consistently 16KiB, dictated by the HTTPS
Server's TLS stack,
- the size of the file to download is 4GiB + N*16KiB, where N is a
positive integer.
As the download progresses, each received 16KiB application data chunk
brings the *next* input value of BodyLength closer down to 4GiB. The cast
in MIN() always masks off the high-order bits from the input value of
BodyLength, but this is no problem because the low-order bits are nonzero,
therefore the MIN() always permits progress.
However, once BodyLength reaches 4GiB exactly on input, the MIN()
invocation produces a zero value. HttpResponseWorker() adjusts the output
value of BodyLength to zero, and then passes it to HttpParseMessageBody().
HttpParseMessageBody() (in "NetworkPkg/Library/DxeHttpLib/DxeHttpLib.c")
rejects the zero BodyLength with EFI_INVALID_PARAMETER, which is fully
propagated outwards, and aborts the HTTPS download. HttpBootDxe writes the
message "Error: Unexpected network error" to the UEFI console.
For example, a file with size (4GiB + 197MiB) terminates after downloading
just 197MiB.
Invert the direction of the cast: widen "Fragment.Len" to UINTN.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
The LoadFile protocol can report such a large buffer size that we cannot
allocate enough reserved pages for. This particularly affects HTTP(S)
Boot, if the remote file is very large (for example, an ISO image).
While the TianoCore wiki mentions this at
<https://github.com/tianocore/tianocore.github.io/wiki/HTTP-Boot#ram-disk-image-size>:
> The maximum RAM disk image size depends on how much continuous reserved
> memory block the platform could provide.
it's hard to remember; so log a DEBUG_ERROR message when the allocation
fails.
This patch produces error messages such as:
> UiApp:BmExpandLoadFile: failed to allocate reserved pages:
> BufferSize=4501536768
> LoadFile="PciRoot(0x0)/Pci(0x3,0x0)/MAC(5254001B103E,0x1)/
> IPv4(0.0.0.0,TCP,DHCP,192.168.124.106,192.168.124.1,255.255.255.0)/
> Dns(192.168.124.1)/
> Uri(https://ipv4-server/RHEL-7.7-20190723.1-Server-x86_64-dvd1.iso)"
> FilePath=""
(Manually rewrapped here for keeping PatchCheck.py happy.)
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2406
* Always print subject line after the git commit id to make
it easier to know the context of warnings or errors.
* Allow UTF-8 characters in subject line
* Error if subject line length > 75 without CVE-xxx-xxxxx present
* Error if subject line length > 92 with CVE-xxxx-xxxxx present
* If body line length is > 75, then print warning instead of error.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2455
BuildOption is used by TargetTxtClassObj.py
GenFdsOption is used by GenFds.py
When the GenFds tool is used alone (e.g. python3 -m GenFds.GenFds -h)
With the OptionParser function, the first detected function
prints the help message
import TargetTxtClassObj to GenFds,
The BuildOption will be executed and replace GenFdsOption
We removed all objects associated with this problem that
were created directly during the import process
(e.g. BuildOption, BuildTarget = MyOptionParser(),
TargetTxt = TargetTxtDict())
The Patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2087
In CryptHkdf.c line 42
EVP_PKEY_CTX *pHkdfCtx;
Variable pHkdfCtx begins with lower case 'p',
which should be acceptable because it it is a pointer.
(Refer to CCS_2_1_Draft, 4.3.3.3)
So ECC tool should be improved to handle issues like this.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Changed @rtval to @retval in SdMmcHcStartSdClock
function description.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guo Dong <guo.dong@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch add FirmwareInterfaceTable.h for the Firmware Interface Table
BIOS specification.
This is to remove future edk2 dependency on edk2-platforms repo. The file
content comes from
edk2-platforms\Silicon\Intel\IntelSiliconPkg\Include\IndustryStandard
BZ link: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
To avoid patches committed with incorrect email address,
use the EmailAddressCheck class on the author email too.
Example:
$ python BaseTools/Scripts/PatchCheck.py 1a04951309
Checking git commit: 1a04951309
The 'Author' email address is not valid:
* The email address cannot contain a space: /o=Intel/ou=External \
(FYDIBOHF25SPDLT)/cn=Recipients/cn=fe425ca7e5f4401abed22b904fe5d964
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
We are checking different emails from the signature list. We are
going to check more. To be able to differency, add a description
field, so the error reported is clearer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
To avoid patches committed with incorrect email address,
use the EmailAddressCheck class on the committer email too.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
As we are going to reuse this code out of the CommitMessageCheck
class, extract it in a new class: EmailAddressCheck.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add code to set SMXE in CR4 in the SmxInitialize flow when SMX is enabled.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Based on Intel Software Develeper's Manual, add all fields in IA32_CR4.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2446
There are many firmwares in the wild not supporting CreateEventEx,
including devices less than 5 years old.
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The HII pages that are part of Tcg2ConfigDxe expect the following PCDs
to be of dynamic HII type, so declare them as such.
gEfiSecurityPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2AcpiTableRev
Currently, the TPM2 ACPI table is not produced, since we do not
incorporate the Tcg2Smm module, which implements the SMI based
physical presence interface exposed to the OS.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Put the TPM2 related DXE modules together in the DSC, and add a
TPM2 support header comment while at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Strip the trailing characters before checking the subject line is
less than 72 characters.
Fixes: e61406708c
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add edk2 platform boot manager protocol which would have platform
specific refreshes to the auto enumerated as well as NV boot options
for the platform.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2389
Currently RSA signing scheme support is available for MD5, SHA-1 or
SHA-256 algorithms.The fix is to extend this support for SHA384 and
SHA512.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Pavana.K <pavana.k@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
This patch updates the microcode loader to always perform a microcode
detect and load on both BSP and AP processor. This is to fix a potential
microcode revision mismatch issue in below situation:
1. Assume there are two microcode co-exists in flash: one production
version and one debug version microcode.
2. FIT loads production microcode to BSP and all AP.
3. UefiCpuPkg loader loads debug microcode to BSP, and skip the loading
on AP.
As a result, different microcode patches are loaded to BSP and AP, and
trigger microcode mismatch error during OS boot.
BZ link: https://bugzilla.tianocore.org/show_bug.cgi?id=2431
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch removes the unnecessary alignment check on microcode patch
TotalSize introduced by commit d786a172. The TotalSize has already been
checked with 1K alignment and MAX_ADDRESS in previous code as below:
if ( (UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize) ||
((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd ||
(DataSize & 0x3) != 0 ||
(TotalSize & (SIZE_1KB - 1)) != 0 ||
TotalSize < DataSize
) {
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2434
Current code use below loops to enumerate the CPUs:
for (Index = mMaxNumberOfCpus; Index-- > 0;) {
it has no issue but not easy for the developers to read the code.
Update above code to below style,
for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
It make the developers easy to read and consistent with other
similar cases in this driver.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This reverts commit 123b720eeb.
The commit message for commit 123b720eeb is not correct.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2404
Set the below two environment variables in edksetup.bat:
set CLANG_HOST_BIN=n
set CLANG_BIN=C:\Program Files\LLVM\bin\
In Windows, set CLANG_HOST_BIN=n to use nmake command
The CLANG_BIN is only be set if it is not defined.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Yu-Chen Lin to have his/her name and email
address displayed properly in the git history.
Cc: Yu-Chen Lin <yuchenlin@synology.com>
Reviewed-by: Yu-Chen Lin <yuchenlin@synology.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-33-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Yonghong Zhu to have his/her name and email
address displayed properly in the git history.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-32-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Vladimir Olovyannikov to have his/her name and
email address displayed properly in the git history.
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-31-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Vitaly Cheptsov to have his/her name and email
address displayed properly in the git history.
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Reviewed-by: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-30-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Star Zeng to have his/her name and email address
displayed properly in the git history.
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-29-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Shenglei Zhang to have his/her name and email
address displayed properly in the git history.
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-28-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Samer El-Haj-Mahmoud to have his/her name and
email address displayed properly in the git history.
Cc: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Cc: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-27-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ray Ni to have his/her name and email address
displayed properly in the git history.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-26-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Philippe Mathieu-Daudé to have his/her name and
email address displayed properly in the git history.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-25-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Nikolai Saoukh to have his/her name and email
address displayed properly in the git history.
Cc: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Nikolai Saoukh <nms@otdel-1.org>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-24-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ming Tan to have his/her name and email address
displayed properly in the git history.
Cc: Ming Tan <ming.tan@intel.com>
Reviewed-by: Ming Tan <ming.tan@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-23-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Michael Kubacki to have his/her name and email
address displayed properly in the git history.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Michael Kubacki <michael.a.kubacki@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-22-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Maurice Ma to have his/her name and email
address displayed properly in the git history.
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-21-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marvin Häuser to have his/her name and email
address displayed properly in the git history (in particular,
commit 62ec4a5e).
Cc: Marvin Häuser <Marvin.Haeuser@outlook.de>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Marvin Häuser <mhaeuser@outlook.de>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-20-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marc-André Lureau to have his/her name and email
address displayed properly in the git history.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-19-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Maciej Rabeda to have his/her name and email
address displayed properly in the git history.
Cc: Maciej Rabeda <maciej.rabeda@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-18-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Liming Gao to have his/her name and email
address displayed properly in the git history.
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-17-philmd@redhat.com>
Ard Biesheuvel
Laszlo Ersek
Michael D Kinney
Fan, ZhijuX
Albecki, Mateusz
Siyuan Fu
Philippe Mathieu-Daude
Jason Voelz
Vitaly Cheptsov via Groups.Io
Eric Dong
Ashish Singhal
Pavana.K
Liu, Zhiguang