Add one sample case about how to use HiiPopup protocol to draw message box.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of HiiPopup protocol in DisplayEngineDxe,
since DisplayEngineDxe is responsible for drawing tasks.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- Delete useless case code to fix /WHOLEARCHIVE build
error with VS2015 tool chain
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
- Delete never touched code
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-July/012385.html
reported the timeout processing in SerialRead is not consistent.
Since SerialPortPoll only checks the status of serial port and
returns immediately, and SerialPortRead does not really implement
a time out mechanism and will always wait for enough input,
it will cause below results:
1. If there is no serial input at all, this interface will return
timeout immediately without any waiting;
2. If there is A characters in serial port FIFO, and caller requires
A+1 characters, it will wait until a new input is coming and timeout
will not really occur.
This patch is to update SerialRead() to check SerialPortPoll() and
read data through SerialPortRead() one byte by one byte, and check
timeout against mSerialIoMode.Timeout if no input.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In a form, some new menus may be dynamically inserted between highlight
menu and previous top of screen menu when some question are refreshed.
So the highlight menu and previous top of screen menu perhaps can't be
shown in one page. Existing codes miss to handle this case then will
cause incorrect display.This patch is to fix this display issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current SEC performance data getting code in FirmwarePerformancePei
may get wrong SEC performance data if FirmwarePerformancePei executes
after memory discovered.
And as SecCore has added SecPerformancePpiCallBack to get SEC performance
data and build HOB to convey the SEC performance data to DXE phase.
This patch is to remove the SEC performance data getting code in
FirmwarePerformancePei.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After calling SendForm to enter front page, configuration change in some
driver may require system reset. Currently the reset status is saved in
SendForm level. Then SendForm can return the reset status.
IsResetRequired API also can return the reset status before exiting browser.
It return the reset status in current SendForm level now. But SendForm can
be recursive called by some module.so the reset status in previous SendForm
may be lost. Now change the IsResetRequired API to return the reset info no
matter the reset is caught in any SendForm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the comments of ResetSystem() that was missed by
37078045d7 and 28426918f0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Report Status Code to indicate BDS starts attempting booting
from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This path is to refine the PXE boot displayed information so as to
in line with NetworkPkg/UefiPxeBcDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently implementation doesn't accept the input during the user
is trying to select the PXE BootMenu from option 43. This path is
to fix that problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=572
Update X64 AsmFuncs.S to resolve a build failure using the
XCODE5 tool chain. This change updates AsmFuncs.S to match
AsmFuncs.asm and AsmFuncs.nasm.
The error generated in XCODE5 build is:
error: invalid instruction mnemonic 'movzxw'
movzxw 8(%rax), %rax
^~~~~~
The correct instruction is
movzwq 8(%rax), %rax
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=572
The ErrorMessage local variable in OnigurumaMatch() should
be type OnigUChar instead of type CHAR8. This resolves
a build failure with the XCODE5 tool chain.
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When DynamicEx PCD is only used in PEI code, but not DXE code,
current implementation of DxePcdGetNextTokenSpace does not assign
TmpTokenSpaceBufferCount correctly, but leaves it as initial value,
then DxePcdGetNextTokenSpace may return incorrect token space guid
and status.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=529
LineWidth of option in funcrion UpdateSkipInfoForMenu and DisplayOneMenu
are inconsistent. Now fix this issue to avoid incorrect UI display.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
if we already established a iSCSI connection from initiator to target
based on IPv4 stack, after using reconnect -r command, we can not rebuild
the session with the windows target, since the server thought the session
is still exist. This issue is caused by wrong place of acquire ownership of
sock lock which lead the iSCSI can not reset the connection correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Below value indicate whether network address configured successfully
or not:
Network Device List->MAC->IPv4 Network Configuration->Configured.
This patch is to refine its help info.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
When TerminalDxe Start() is called multiple times, the old logic
unconditionally appended the terminal device path candidates to
*Dev (ConInDev/ConOutDev/ErrOutDev), resulting the volatile storage
is full.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
An example:
The codes in function Output8bitPixel in Image.c:
OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
Both Image->Width and Ypos are of type UINT16. They will be promoted to
int (signed) first, and then perform the multiplication defined by macro
BITMAP_LEN_8_BIT. If the result of multiplication between Image->Width and
Ypos exceeds the range of type int, a potential incorrect results
will be assigned to OffsetY.
This commit adds explicit UINT32 type cast for 'Image->Width' to avoid
possible overflow in the int range. And also fix similar issues in
HiiDatabase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
GCC -fno-builtin option is added into tools_def.template at
90defe7198.
So, there is no need to set it in module INF file.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=442
PcdExpression used in INF to control PCD and Source is unsupported feature.
Current sample usage in module INF brings confuse.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The BGRT table has an 8 byte field for the memory address of the image
data, and yet the driver explicitly allocates below 4 GB. This results
in an ASSERT() on systems that do not have any memory below 4 GB to begin
with.
Since neither the PI, the UEFI or the ACPI spec contain any mention of
why this data should reside below 4 GB, replace the allocation call
with an ordinary AllocatePages() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invocations of EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() may
result in a crash when the value of PcdAcpiExposedTableVersions does
not include EFI_ACPI_TABLE_VERSION_1_0B.
The reason is that EFI_ACPI_TABLE_PROTOCOL::InstallAcpiTable() will
only populate the Rsdt1/Rsdt3 pointers when EFI_ACPI_TABLE_VERSION_1_0B
is set, whereas EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() will
invoke PublishTables with EFI_ACPI_TABLE_VERSION_1_0B alawys set,
resulting in a NULL pointer dereference of the Rsdt1/Rsdt3 pointers.
So take PcdAcpiExposedTableVersions into account for UninstallAcpiTable
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
RamDiskDxe installs the RamDiskAcpiCheck() Ready To Boot callback
function. If EFI_ACPI_TABLE_PROTOCOL and/or EFI_ACPI_SDT_PROTOCOL are not
found, then informational messages are logged, and the RAM disks are not
published to the (nonexistent) NFIT table.
The logic is fine, but the info messages are not concatenated correctly
from multiple string literals -- the second parts are passed as (unused)
arguments to DEBUG(). Fix the typos.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
198a46d768 improved the DSDT and X_DSDT
fields mutual exclusion by checking FADT revision, but that breaks
some OS that has assumption to only consume X_DSDT field even the
DSDT address is < 4G.
To have better compatibility, this patch is to update the code to not
make FADT.{DSDT,X_DSDT} mutual exclusion, but always set both DSDT and
X_DSDT fields in the FADT when the DSDT address is < 4G.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Jeff Fan <jeff.fan@intel.com>
The original logic assumes GOP hande is son of PCI handle but it
is not always true.
Below wordings are from UEFI Spec:
If a graphics device supports multiple frame buffers, then
handles for the frame buffers must be created first, and then the
handles for the video output devices can be created as children of
the frame buffer handles.
So the GOP handle could be grandson of the PCI handle.
EfiBootManagerGetGopDevicePath(VideoController) is used to fix
this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
v2: Handle error case in SockCreateChild and fix typo issue
when we destroy the socket Sock and its associated
protocol control block, we need to first close the
parent protocol, then remove the protocol from childHandle
and last to free any data structures that allocated in
CreateChild. But currently, we free the socket data
(Socket ConfigureState) before removing the protocol
form the childhandle. So if the up layer want to send the
tcp reset packet in it's driver binding stop function, it will failed.
The IpInstance destroy state is redundant and may cause
ip transmit failed if up layer want to send ip packet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Add the check in Ip4Config2SetDefaultIf to avoid the DHCP configuration
case.
Ip4config2 doesn't check the validity of Ip/Netmask pair, which
leads to the invalid combination of Ip and Netmask setting.
This patch is to resolve the issue.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Current PI spec has no clear description about whether the
SkuId could be changed multiple times or not during one boot.
If the SkuId could be changed multiple times during one boot,
different modules may get inconsistent PCD values.
And DynamicHii PCD maps to UEFI variable, once one DynamicHii
PCD(UEFI variable) is set for one SkuId, then the PCD value
will be always from UEFI variable but not PCD database, even
the SkuId is set to other value.
This patch is to update PCD drivers to allow SkuId to be
changed only once during one boot.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ACPI specification, up to and including revision 5.1 Errata A, allows
the DSDT and X_DSDT fields to be both set in the FADT. (Obviously, this
only makes sense if the DSDT address is representable in 4 bytes.)
Starting with 5.1 Errata B, specifically for Mantis 1393
<https://mantis.uefi.org/mantis/view.php?id=1393>, the spec requires at
most one of DSDT and X_DSDT to be set to a nonzero value.
MdeModulePkg/AcpiTableDxe handles this mutual exclusion somewhat
inconsistently.
- If the caller of EFI_ACPI_TABLE_PROTOCOL.InstallAcpiTable() installs the
tables in "DSDT, FADT" order, then we enforce the exclusion between the
DSDT and X_DSDT fields:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT B]
-------------- --------- -----------
yes set clear
no clear set
This behavior conforms to 5.1 Errata B. (And it's not required by
earlier versions of the spec.)
- If the caller passes in the tables in "FADT, DSDT" relative order, then
we do not enforce the exclusion:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT A]
-------------- --------- -----------
yes set set
no clear set
This satisfies 5.1 Errata A and earlier, but breaks 5.1 Errata B and
later.
Unify the handling of both relative orders. In particular, check the major
and minor version numbers in the FADT. If the FADT version is strictly
before 5.1, then implement [VARIANT A]. If the FADT version is equal to or
larger than 5.1, then implement [VARIANT B].
We make three observations:
- We can't check the FADT table version precisely against "5.1 Errata B";
erratum levels are not captured in the table. We err in the safe
direction, namely we enforce the exclusion for "5.1" and "5.1 Errata A".
- The same applies to "6.0" versus "6.0 Errata A". Because we cannot
distinguish these two, we consider "6.0" to be "equal to or larger than
5.1", and apply [VARIANT B], enforcing the exclusion.
- While a blanket [VARIANT B] would be simpler, there is a significant
benefit to [VARIANT A], under the spec versions that permit it:
compatibility with a wider range of OSPMs (typically, older ones).
For example, Igor reported about a "DELL R430 system with rev4 FADT
where DSDT and X_DSDT are pointing to the same address". Michael also
reported about several systems that exhibit the same.
Regression tested with the following KVM guests (QEMU built at
ata0def594286d, "Merge remote-tracking branch
'remotes/bonzini/tags/for-upstream' into staging", 2017-01-30):
- OVMF: boot and S3 suspend/resume
- Ia32, Q35, SMM
- Fedlet 20141209
- Ia32X64, Q35, SMM
- Fedora 22
- Windows 7
- Windows 8.1
- Windows 10
- Windows Server 2008 R2
- Windows Server 2012 R2
- Windows Server 2016 Tech Preview 4
- X64, I440FX, no SMM
- Fedora 24
- RHEL-6.7
- RHEL-7.2-ish
- ArmVirtQemu: boot test with virtio-gpu
- AARCH64
- Fedora 24
- RHELSA-7.3
- openSUSE Tumbleweed (4.8.4-based)
This change is connected to ASWG ticket
<https://mantis.uefi.org/mantis/view.php?id=1757>, which is now
closed/fixed.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch incurs no functional changes, it just removes some whitespace,
and also makes sure we always assign
AcpiTableInstance->Fadt3->Dsdt
first, and
AcpiTableInstance->Fadt3->XDsdt
second. The goal is to separate the syntactic changes from the functional
changes implemented by the next patch.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure
if present and not empty. by following TCG PC Client PFP 00.49
Previous patch for PCR[7] DBT part is overrode.
dc9bd6ed28
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
To handle the deprecation of PrintLib APIs UnicodeValueToString and
AsciiValueToString by subsequent commits, the commit refines the logic for
the implemetation of the UnicodeValueToString and AsciiValueToString
services in EFI_PRINT2_PROTOCOL.
When the macro DISABLE_NEW_DEPRECATED_INTERFACES is defined (indicating
the deprecation of the PrintLib APIs), the above two services will ASSERT
and will return zero to reflect not being supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
It is the follow up of commits 51f0ceb..9e32e97 to replace
AsciiValueToString/UnicodeValueToString with
AsciiValueToStringS/UnicodeValueToStringS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
This module updates the under-4GB page tables configured by the S3-Resume
code in UefiCpuPkg/Universal/Acpi/S3Resume2Pei. The mask is saved at module
start (ScriptExecute.c), and applied when tables are expanded on-demand by
page-faults above 4GB's (SetIdtEntry.c).
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when 4GB tables are created (UefiCapsule.c), and when
the tables are expanded on-demand by page-faults above 4GB's (X64Entry.c).
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The EBC driver emits thunks for native to EBC calls, which are short
instructions sequences that bridge the gap between the native execution
environment and the EBC virtual machine.
Since these thunks are allocated using MemoryAllocationLib::AllocatePool(),
they are emitted into EfiBootServicesData regions, which does not reflect
the nature of these thunks accurately, and interferes with strict memory
protection policies that map data regions non-executable.
So instead, create a new helper EbcAllocatePoolForThunk() that invokes the
AllocatePool() boot service directly to allocate EfiBootServicesCode pool
memory explicitly, and wire up this helper for the various architecture
specific thunk generation routines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
For string op-code, the default string may not reach the
maximum size, so when generating <AltResp> string, we should
clean the value before setting the default string.
https://bugzilla.tianocore.org/show_bug.cgi?id=375
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When set value to the array "InputText", the index was used incorrectly.
And the array "InputText" is not initialized. These will cause some value
in the array is random, so it will be shown incorrectly sometimes.
This patch is to fix this issue.
https://bugzilla.tianocore.org/show_bug.cgi?id=358
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Wang Cloud <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the EFI_PRINT2S_PROTOCOL replaces the following 2 services in
EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
The 2 new services perform checks to the input parameters and will return
relative status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, When there are more than 9 Ethernet ports available,
'ifconfig -l' is not listing all the ports, only show the ports 0 to 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure and
ExitBootService. Measure "SecureBoot" change after PK update.
Spec version : TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitly return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Pass '&Node.Header' instead of '&Node' as the 1st parameter to function
SetDevicePathNodeLength().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
TerminalDxe driver contains bugs in its DriverBindingStart():
1. It cannot be started AGAIN using a different terminal type;
2. It doesn't install SimpleTextInput/SimpleTextOut when
ConIn/ConOut doesn't contain its device path. The check is
duplicated of the same logic in ConPlatform driver and can
be removed.
The patch optimized the code to remove the unnecessary
gEfiCallerIdGuid protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Ip4Config2SetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The BootScriptWriteMemPoll() helper function in both drivers does the
following:
- pop Delay from the variable argument list as UINT64, then truncate it to
UINTN,
- divide Delay by 10, using DivU64x32Remainder(), then store the quotient
in LoopTimes (also UINTN),
- pass LoopTimes to S3BootScriptSaveMemPoll() as last argument.
The truncation to UINTN is superfluous and wrong in this logic (not to
mention incompatible with the PI spec); it prevents callers from
specifying Delays longer than 0xFFFF_FFFF * 100ns (approximately 429
seconds == 7 minutes 9 seconds) on Ia32. In particular it prevents callers
from specifying an infinite timeout (for example, 0xFFFF_FFFF_FFFF_FFFF *
100ns, approximately 58494 years).
Change the type of Delay and LoopTimes to UINT64. Keep the same logic,
just remove the truncations. The resultant LoopTimes values can be safely
passed to S3BootScriptSaveMemPoll() thanks to the previous patch.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Register key notify for toggle state (CapsLock, NumLock and ScrollLock)
sync between multiple keyboards.
The implementation for this feature requires keyboard driver supports
EFI_KEY_STATE_EXPOSED, and turns on physical TextInEx partial key
report for toggle state sync.
The virtual TextInEx will report the partial key after it is required
by calling SetState(X | KEY_STATE_VALID_EXPOSED) explicitly.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
This commit refines the logic for the CvtNum function. It avoids using the
decrement operator '--' for array index to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
For variable name, it should contain lower case characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch remove the ASSERT when receive a DHCP packet large than the maximum
cache buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=290
Current SmmVariableGetStatistics() in VariableSmm.c is always
checking input InfoSize against the first variable info,
it is incorrect.
For instance, there are three variables.
BootOrder
Boot0000
Boot0001
If the input InfoEntry is holding the second variable info (Boot0000)
and InfoSize is sizeof (VARIABLE_INFO_ENTRY) + StrSize (L"Boot0000"),
current code will return EFI_BUFFER_TOO_SMALL, but it should return
the third variable info (Boot0001).
This patch is to refine the code logic.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code in SmmVariableHandler() checks CommBufferSize
buffer to make sure it points to outside SMRAM in
"case SMM_VARIABLE_FUNCTION_GET_STATISTICS".
But after eaae7b33b1,
CommBufferSize buffer points to SMRAM that was used by
SMM core to cache CommSize from SmmCommunication protocol,
then the check will fail definitely and GET_STATISTICS
feature breaks.
In fact, do not need check CommBufferSize buffer at all
even before eaae7b33b1.
Before eaae7b33b1,
CommBufferSize buffer pointed to gSmmCorePrivate->BufferSize
that is outside SMRAM, the check will success definitely;
after eaae7b33b1,
CommBufferSize buffer points to local variable BufferSize
(in SMRAM) in SmmEntryPoint(), the check is not needed
definitely.
The patch is to remove the check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PlatformBootManagerBeforeConsole() might want to trigger this event
to connect ConIn so BdsDxe initializes this event before
PlatformBootManagerBeforeConsole().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the ConfigFormEntry structure
will be freed in IScsiDriverBindingStop, but the
mCallbackInfo->Current is not configured as null and
this pointer will be used again in IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
* Introduce a generic Debugger Configuration protocol.
* Add private configuration data in the EBC Debugger and make it
register the Debugger Configuration protocol on initialization.
* Add a shell application that uses the protocol above to access
the private data in order to configure the EBC debugger.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code is using L'\0' to compare with a ASCII char.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function EdbLoadCodBySymbolByIec(), AsciiStrGetNewTokenField() at line
1589 will return NULL if the first character in 'LineBuffer' is '\0'. But
the previous if statement at line 1576 ensures the above case will not
happen.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function DebuggerDisplaySymbolAccrodingToAddress(), when variable
'CandidateAddress' (returned by EbdFindSymbolAddress function) equals
(UINTN) -1, it also indicates that the symbol is not found at the given
address.
This commit adds this missing check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add checks for the return value of function Atoi() in EdbCmdBreakpoint.c.
If the input parameter 'CommandArg' contains non-digit character, print
corresponding error message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Operands in a bitwise operation should have the same size to eliminate
unexpected results.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In current DriverSampleDxe, the sample code of password is
not a good example, so we plan to remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current SetupBrowser, the logic related to non-interative password
is not correct. How to support it correctly or whether support it
is still under investigation. First step remove the incorrect logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when the password is not supported, pop up a dialogue
to let user know the reason.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* This patch introduces EbcDebuggerHook.c/h and inserts the required
EBCDebugger references into the existing EBC source files.
* With all the hooks defined to their empty version in EbcDebuggerHook.c
the existing EBC VM behaviour is left unaffected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When returning selectable menu, should return the menu in current form,
the codes miss to do the check. Now returning the selectable menu behind
the codes "if ((UINTN) Distance + NextMenuOption->Skip > GapToTop)".
Then can cover the check, can return the menu correctly.
https://bugzilla.tianocore.org/show_bug.cgi?id=232
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch updates the PXE driver to drop the input DHCP packet if it
exceed the maximum length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Current implementation always creates PlatformRecovery0000
pointing to \EFI\BOOT\BOOT$(ARCH).efi but it may overwrite
PlatformRecovery#### created before (maybe by a DXE driver).
The patch only uses the smallest unused option number for
the \EFI\BOOT\BOOT$(ARCH).efi PlatformRecovery#### to avoid
overwriting already-created PlatformRecovery####.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The implementation doesn't check the LoadOptions[Index].Status but
only depends on the Status returned from
EfiBootManagerProcessLoadOption(), which results only the first
PlatformRecovery#### runs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The memory will be set to background color after success allocate
the data, so not need to call AllocateZeroPool.
Related bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=223
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch made the following change:
* DataItem->Status should be updated to the status code.
* Data should not be freed if EFI_NOT_READY returned.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Separate out the return status fix.
* Replace IP4_MASK_MAX with IP4_MASK_NUM.
* Remove the ON_EXIT label.
This patch is used to add the wrong/invalid subnet check.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The 3rd party image should be loaded after EndOfDxe event signal and
DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
published DxeSmmReadyToLock protocol.
So the SecurityStubDxe can only depend on EndOfDxe event.
This patch enhances the SecurityStubDxe to listen on
DxeSmmReadyToLock protocol installation and if any 3rd party image
is loaded before DxeSmmReadyToLock, it reports failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds check of deferred images before booting to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The images not from FV are treated as 3rd party images. They will
be deferred to dispatch when they are dispatched before EndOfDxe
event.
It's a new feature in the BS.LoadImage() path which can disallow
executing 3rd party images before EndOfDxe and re-execute them
after EndOfDxe (through EfiBootManagerDispatchDeferredImages
introduced in next commit).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The previous ESRT driver unconditionally treat FMP to be
ESRT_FW_TYPE_DEVICEFIRMWARE.
EDKII System Capsule reuses FMP, but it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Add check to ImageTypeId check to see if it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
If there are two DynamicEx PCDs have the same PCD token number but
in different PCD token spaces, the PcdGetNextToken function may get
the wrong PCD token.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=190
The issue is with signed/unsigned comparisons between
Mode->CursorRow and Row and Mode->CursorColumn and Column.
The fix is to add typecast to UINTN for comparisons.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Brian Johnson <bjohnson@sgi.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Brian Johnson <bjohnson@sgi.com>
In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The TtyTerm terminal driver is missing support for sequences produced
by the page up, page down, insert, home, and end keys in some terimnal
emulators. Add them.
Tested under Ubuntu 16.04 using xterm 322-1ubuntu1, GNOME terminal
3.18.3-1ubuntu1, and XFCE terminal 0.6.3-2ubuntu1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Kyle Roberts <kyroberts@sgi.com>
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Roy Franz <roy.franz@hpe.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For TtyTerm terminals, output a shorter escape sequence when possible
to move the cursor within the current line, and don't print any escape
sequence if the cursor is already at the correct position. This
removes extra cursor motion activity at the EFI shell prompt,
improving performance. It also makes it possible in many cases to
successfully use a terminal window which is taller than the driver's
mode setting (eg. 80x25.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When we print the last character on a line, the terminal driver wraps
CursorRow/CursorColumn to the beginning of the next line. But the
terminal itself doesn't wrap its cursor until the next character is
printed. That throws off the driver's cursor position tracking.
So when we have printed the last character on a line, and are not in
the middle of outputing an escape sequence, synchronize the terminal
with the driver by outputing CR+LF. This matches the expected
behavior, and the behavior of the VGA console driver.
Only change the behavior of TtyTerm, not the other terminal types.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When fail to submit data and user discard the change, we should send
the discard info to driver with EFI_BROWSER_ACTION_CHANGED callback.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The driver uses the GraphicsInfo HOB and GraphicsDeviceInfo HOB
passed from PEI to find the graphics controller to manage and
produce the GraphicsOutput protocol.
GraphicsInfo HOB and GraphicsDeviceInfo HOB are created by
a PEIM which initializes the graphics controller hardware in
PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
The return value of GetImageIdOrAddress() could be NULL if the
ImageId is invalid. The patch fixes the bug to return EFI_NOT_FOUND
when GetImageIdOrAddress() returns NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The type of variable "SmallestIdFromFlag" should be BOOLEAN,
this patch fix the incorrect type.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current PeiCdExpress driver will return capsule size to
be block aligned.
It will fail if we check the capsuleImageSize field.
The patch correct the returned capsule size.
Tested-by: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to UEFI spec, NewImageEx()/SetImageEx()/DrawImageEx()
implicitly call the non-Ex version interface
of HiiImage protocol.
GetImageEx()/DrawImageIdEx() are the enhanced version of
GetImage()/DrawImageId(), which can support decoding JPEG/PNG
through the help of HiiImageDecoder protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Update GetImageIdOrAddress() to recognize PNG/JPEG image block.
A offset calculation bug was fixed.
2. Update HiiGetImage() comments to say PNG/JPEG support is provided
by HiiImageEx
3. Update HiiSetImage() to support replacing a PNG/JPEG image block
with a new image
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The previous DNS server data will be retained after the policy
changes from Dhcp to Static. This patch is used to clean the
previous dhcp configuration data.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
To follow PI1.4a, BaseTools has be updated to fix artificial limitation of
SkuId range.
This patch is to update PCD database structure definition to match BaseTools.
Note: The source code and BaseTools need to be upgraded at the same time,
and if they are not upgraded at the same time, build error like below will
be triggered to help user identify the problem.
"Please make sure the version of PCD PEIM Service and the generated
PCD PEI Database match."
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to fix the incorrect logic when handling the "&READONLY" tag
in <KeywordResp>.
1. In UEFI spec, the "&READONLY" tag is in upper case, but using the lower
case in current codes by mistake.
2. The logic in checking the ReadOnly flag is not correct. Whether having
"&READONLY" tag must be consistent with the result of
"ExtractReadOnlyFromOpCode" function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IP address should not be treated as classful one if DHCP options
contain a classless IP with its true subnet mask. Otherwise, DHCPv4
TransmitReceive() will failed. This real subnet mask will be parsed
and recorded in DhcpSb->Netmask. So, we need check it before get the
IP's corresponding subnet mask.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The prototypes of EbcInterpret() and ExecuteEbcImageEntryPoint() are
private to the AARCH64 implementation of EbcDxe, so we can shuffle
the arguments around a bit and make the assembler thunking glue a lot
simpler.
For ExecuteEbcImageEntryPoint(), this involves passing the EntryPoint
argument as the third parameter, rather than the first, which allows
us to do a tail call. For EbcInterpret(), instead of copying each
argument beyond #8 from one native stack frame to the next (before
another copy is made into the VM stack), pass a pointer to the
argument stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Instead of pessimistically copying at least 64 bytes from the VM stack
to the native stack, and popping off the register arguments again
before doing the native call, try to avoid touching the stack completely
if the VM stack frame is <= 64 bytes. Also, if the stack frame does exceed
64 bytes, there is no need to copy the first 64 bytes, since we are passing
those in registers anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The thunk generation is needlessly complex, given that it attempts to
deal with variable length instructions, which don't exist on AArch64.
So replace it with a simple template coded in assembler, with a matching
struct definition in C. That way, we can create and manipulate the thunks
easily without looping over the instructions looking for 'magic' numbers.
Also, use x16 rather than x9, since it is the architectural register to
use for thunks/veneers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Change to consistent // style comments. Also, remove bogus global
definitions for external functions, and move the real exports to
the top of the file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
We have added a new policy to get default value for question:
get default from other default id if current default is not specified.
But when getting default value for checkbox, if the default
flag is not set, it will set the default value to FALSE for checkbox.
This behavior in checkbox conflicts with the new added policy,
so now we move this behavior to the end of getting default form other
default id.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
IpSb->Reconfig should not be set to TRUE to focal the reconfiguration
during the policy changes from Static to DHCP. It's redundancy because
the default router table and default addresses have been freed ahead (
Detailed see Ip4Config2OnPolicyChanged() function). Otherwise, the
potential failure will appear if UseDefaultAddress configured. Reproduce
steps see below:
#1. Set policy to DHCP.
#2. If DHCP process is not complete yet, then run one APP to invoke UDP4
Configure with "UseDefaultAddress = TRUE" (loop to call UDP4 Configure
until Ip4Mode.IsConfigured changes to TRUE).
#3. Even DHCP succeed but Ip4Mode.IsConfigured flag never set to TRUE
Concrete analysis is as follows:
In #1, the policy will be set to DHCP, and then Ip4Config2OnPolicyChanged()
will be called. In this function, if "IpSb->Reconfig" flag is set to TRUE,
the original "IpSb->DefaultInterface" will be abandoned/freed once the
DHCP process finished.
In #2, UDP4 Configure with "UseDefaultAddress = TRUE" is called, that means
the default interface (IpSb->DefaultInterface) will be selected as current
instance's interface.
In #3, when DHCP process finished, the original DefaultInterface will be
abandoned/freed because "IpSb->Reconfig" flag is true. Meanwhile, one new
interface is assigned to "IpSb->DefaultInterface". This new interface is
different to the original one assigned to the UDP4 Configured instance. So,
even DHCP process succeed, the up caller will never have the chance to get
it's truly status.
Cc: Cohen Eugene <eugene@hp.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch is to enhance SetupBrowser to handle following two cases:
1. When searching BlockName in AltResp, the hex digits of related BlockName
in AltResp may be in uppercase.
2. When converting the Value in AltResp to HiiValue, the length of value
string is bigger than the length of StorageWidth of the question.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When comparing the L"OFFSET=" with the ConfigResp string to find
all the "OFFSET=" in ConfigResp, should skip the character "&"
before "OFFSET=" in ConfigResp string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in SetupBrowser.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in HiiDatabase.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The original code will assert when dealing with those empty FVs.
The fix is used to solve this bug.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This driver searches APPLICATION in FV and installs LoadFile protocol
for every found one. Then, BDS will add BootOption for LoadFile protocol.
It provides the generic way to expose boot option for the internal
application, such as Shell. With this driver, PlatformBds doesn?t need
to specially handle Shell application.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This commit will scan all the EFI raw section instances within the
module's FV to make sure the NVDIMM root device SSDT can be properly
located.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
- abstrated to abstracted
- accessibla to accessible
- addres to address
- apropriate to appropriate
- arry to array
- availabe to available
- avaliable to available
- becasue to because
- correponding to corresponding
- etablished to established
- exeuction to execution
- extensiable to extensible
- fileds to fields
- loadding to loading
- ptototypes to prototypes
- prococol protocol
- requried to required
- resoruce to resource
- runing to running
- uild to build
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
HiiConfigRoutingRouteConfig function returns 'Progress' to indicate
the failure info in the ConfigResp string. But when fail to route the
ConfigResp for EfiVarStore, it doesn't return the correct failure info.
Now this patch is to fix this issue and add debug info let user know the
reason of failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
IP4_CONFIG2_INSTANCE->DataItem is used to save the configuration
data to NV variable. When the policy is changed from static to
DHCP, DnsServers info will be cleaned from DataItem first
(See Ip4Config2SetPolicy), it's correct because DnsServers info
should not be saved to NV variable.
But if there is any DnsServers info received from DHCP message, it
will be reset to DataItem again (See Ip4Config2SetDnsServerWorker),
which may cause the NV variable contain the DnsServers info while
the policy is DHCP (See Ip4Config2WriteConfigData).
Then, while the platform is reset, the issue happened. Because
Ip4Config2DataTypeDnsServer is set under DHCP policy, which is not
allowed by UEFI Spec and error returned.
This patch is used to resolve this potential issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxe4BcDxe.lib(PxeBcDhcp.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 1659 in file
MdeModulePkg/Universal/Network/UefiPxeBcDxe/PxeBcDhcp.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This is a enhancement to support the case when platform firmware
doesn't support Boot Manager Menu. For now, if BootManagerMenu FFS
can not be retrieved from FV, BDS core code will still register a
boot option for it. Then, this non-functional boot option will
still be booted by user's request (like HotKey or Exit from shell)
to cause additional boot time and error status code reported.
Therefore, it would be good to skip BootManagerMenu boot option
registration and then return error status and Invalid BootOption
data for this case so that the BootManagerBoot() or other consumers
can directly return without doing anything.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Let data of DXE memory status code can be used by other modules.
1. Save the address of DXE memory status code table to DxeConfigurationTable.
2. Save the address of SMM memory status code table to SmmConfigurationTable.
3. Move RUNTIME_MEMORY_STATUSCODE_HEADER to its public header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 'Sting' is returned by the function GetUnicodeStringTextAndSize.
If it is NULL, function GetUnicodeStringTextAndSize will return
EFI_OUT_OF_RESOURCES, and error handling codes will cover it.
So the pointer 'Sting' can not be NULL when using it.
So we can add the ASSERT codes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Use real nasm instruction to replace DB bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/S3Asm.asm to X64/S3Asm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Use real nasm instruction to replace DB bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
IA32/S3Asm.asm to IA32/S3Asm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/EbcLowLevel.asm to X64/EbcLowLevel.nasm
And, manually update nasm code to use mov rcx, dword value and generate
the same assembly code with rcx register to asm code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/EbcLowLevel.asm to Ia32/EbcLowLevel.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/AsmFuncs.asm to X64/AsmFuncs.nasm
Note: Also applied many manual cleanups where conversion script failed
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/AsmFuncs.asm to Ia32/AsmFuncs.nasm
Note: Also applied many manual cleanups where conversion script failed
And, update Vect2Desc() to be same to original logic
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/PageFaultHandler.asm to X64/PageFaultHandler.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Without this change, after converting this code to NASM, this error
will be reported:
error: comma or end of line expected
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
NASM doesn't support EXTERNDEF, so convert this to PUBLIC.
This will make it easier to convert this code to NASM using an
automated script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Without this change, after converting this code to NASM, this error
will be reported:
error: invalid combination of opcode and operands
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
This patch is used to fix the wrong IpSb->State update issue.
Issue reproduce steps:
1 .First PXE boot, then boot to shell;
2. ifconfig -s eth0 dhcp (Success);
3. Reboot and do PXE, then boot to shell;
4. ifconfig -s eth0 dhcp (Platform failed to get IP address no matter
how many times retried.)
Root cause:
On step3 reboot, policy is DHCP (Changed by step2). So, Ip4Dxe driver
will try to get one IP address from DHCP server automatically. Before
it get the IP address successfully, the IpSb->State will be always in
IP4_SERVICE_STARTED status until the Instance->Dhcp4Event is triggered,
then it can be changed to IP4_SERVICE_CONFIGED. But the DHCP process
will be interrupted by PXE boot, which will change the policy to static,
and the Instance->Dhcp4Event will be also closed directly. However,
current implementation doesn't update the IpSb->State to
IP4_SERVICE_UNSTARTED status in such case. So, failure happened.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Per UEFI spec the successful returning of boot option triggers boot
to UI. But when the BootNext just points to UI, it causes confusing.
So the patch avoids booting to UI again when the BootNext points to
UI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Amy Chan <amy.chan@intel.com>
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Per UEFI spec the successful returning of boot option triggers boot
to UI. But when the BootNext just points to UI, it causes confusing.
So the patch avoids booting to UI again when the BootNext points to
UI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When Hii variable is not present and if we try to update a variable offset
with some value, we are creating a new variable by Zeroing all the variable
offsets except the one which we are trying to update.
This will override all the other variable default values which are
programmed as a part of initial PCD definition.
DXE PCD driver could be enhanced to combine the DynamicHii
PCDs(related to same variable) default values and only update the offset
PcdSetXXX want to set, then set the combined values to variable.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When adding font package, there exists the case that only have the
EFI_HII_GIBT_GLYPH_DEFAULT or EFI_HII_GIBT_GLYPHS_DEFAULT glyph block
and use the default cell info in font package fixed header. In this
case, we can't get the correct baseline now. This patch is to fix this
issue by recalculating the baseline when the glyph block type is
EFI_HII_GIBT_GLYPH_DEFAULT or EFI_HII_GIBT_GLYPHS_DEFAULT.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gPerformanceProtocolGuid in BdsDxe.inf explicitly.
Currently, BdsDxe could build pass as it inherits
gPerformanceProtocolGuid from UefiBootManagerLib.inf.
Also update the usage of gPerformanceProtocolGuid in UefiBootManagerLib.inf.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Adding an option in HII menu so user can choose memory type to use when
creating a RAM Disk in system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
The 'Size' numeric value used when creating a raw RAM disk does not
require a varstore to save its previous value in the create raw RAM disk
HII page.
The expecting behavior is that after a user created a raw RAM disk, the
next time when the create raw RAM disk page is entered, the 'Size' numeric
will be the default value (EFI_PAGE_SIZE).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
This patch is used to update IP4->Configure() to allow the upper layer
modules to obtain a default address by setting UseDefaultAddress to TRUE
when default address is not available yet.
Cc: Ye Ting <ting.ye@intel.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Sriram Subramanian <sriram-s@hpe.com>
When add Font Package, the cell in EFI_HII_FONT_PACKAGE_HDR
contains the measurement of the widest and tallest characters
in the font. The measurement may be not absolutely correct,
so when use this cell information to calculate the baseline may
cause incorrect result. Besides this calculation is not necessary.
So remove it now.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When render string to screen, for proportional fonts,
the background color may not set to the whole BltBuffer.
And this will cause incorrect display.
Now initialize the background color to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2:
*Refine the coding style according edk2 community's feedback.
Current SNP UNDI Initialize command does not follow the UEFI Spec
to update the SNP MediaPresent field. The result for the Initialize
command execution check should be:
StatFlags: (1) Monitor the upper two bits (14 & 15) in the field to know
whether the command has been executed by the UNDI (Not started, Queued,
Error, Complete). (2) Check the other field to see if there is an active
connection to this network device (used to update MediaPresent).
StatCode: After command execution completes, either successfully or not,
this field contains the result of the command execution (success or failure).
This patch is used to fix it.
NOTE: If any UNDI driver does not follow the UEFI Spec for the media status
update, it may meet failure with this more conditions check (StatFlags).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In Ip4CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Potentially uninitialized local variables 'TableKey' and 'TableHeader'
might be used in functions RamDiskPublishNfit() and RamDiskUnpublishNfit()
in file RamDiskProtocol.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
This patch is used to remove the status check for SockProcessRcvToken.
It's not return EFI_STATUS.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The following codes are useless and cause memory leak issues.
So now remove them.
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove the sentence
"The valid SkuId range is 1 to 255." from SetSku function comments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When copy new string content to BufferValue, need to clean the
BufferValue firstly, or the BufferValue may contain some
content that doesn't belong to the new string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When submit form fail, the progress point to the first fail part
in ConfigResp, so should free the ConfigResp after Progrss has
been processed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The RamDiskDxe driver originally uses a variable-length HII varstore to
retrieve the HII checkbox status of each registered RAM disk.
However, HII does not support the variable-length varstore feature.
Therefore, only the checkbox status for the first 8 RAM disks are tracked
for the following definition of HII varstore structure considering the
alignment:
typedef struct {
UINT64 Size;
UINT8 RamDiskList[0];
} RAM_DISK_CONFIGURATION;
This commit uses the private data of each registered RAM disks to track
the HII checkbox status instead to resolve the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The RamDiskDxe now will report RAM disks with reserved memory type to NFIT
in the ACPI table.
This commit will also make sure that an NVDIMM root device exists in the
\SB scope before reporting any RAM disk to NFIT.
To properly report the NVDIMM root device, one will need to append the
following content in the [Rule.Common.DXE_DRIVER] field in platform FDF
files:
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Make sure "BootFileName" is not overloaded before use it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenzhihui <chenzhihui4@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In current code will always call submit callback function,
but we should call submit callback function when has no failure
in the submit action. This patch to fix this issues.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When RouteConfig function fail in SubmitForForm or SubmitForFormSet
function, we should restore the question value base on the failure
information, should not restore all the question.
This patch to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some UNDI drivers may not support the cable detect in UNDI INITIALIZE command,
but support the media present check in UNDI GET_STATUS command. Current SNP
driver will set the MediaPresentSupported field to FALSE in EFI_SIMPLE_NETWORK_MODE
for such case, which forbid the media detect from the callers.
This patch updates the SNP driver to support such kind of UNDIs for media detect.
MediaPresentSupported will be set to TRUE, and a GET_STATUS command will be issued
immediately after INITIALIZE command in SNP->Initialize() function, to refresh
the value of MediaPresent in SNP mode data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
EFI_PXE_BASE_CODE_PROTOCOL has interface to set the TTL and ToS value, but
not used by the UdpWrite() interface. The code always use a hard coded 16
for the TTL and 0 for ToS.
This patch update the UpdWrite() to use the TTL and ToS which have been set
by the SetParameters().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtDxe to use fixed SMM communication buffer to get
performance data by SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update FpdtSmm to handle SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
request.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Dandan Bi
Song, BinX
Jiaxin Wu
Zhang, Chao B
Star Zeng
Hao Wu
Ruiyu Ni
Fu Siyuan
Michael Kinney
Zhang, Lubo
Jeff Fan
Liming Gao
Ard Biesheuvel
Laszlo Ersek
Leo Duran
Thomas Huth
Pete Batard
Eric Dong
Jiewen Yao
Cinnamon Shia
Gary Lin
Brian J. Johnson
Jeff Brasen
Feng Tian
Giri P Mudusuru
Sunny Wang
Jordan Justen
Tapan Shah
Fu, Siyuan
Zenith432
Heyi Guo