The legacy 32-bit SMBIOS entry point has little use on AARCH64 systems,
since many such systems have no 32-bit addressable physical RAM, and so
OSes that implement SMBIOS will have to be able to deal with the 64-bit
entry point anyway.
Given that the OS will map main memory in 1 GB chunks if it can, and that
punching a page sized hole (e.g., for SMBIOS data) into it will result in
the whole 1 GB chunk being mapped using 2 MB and 4 KB blocks instead, it
is important to group memory reservations from the OS as much as we can,
and allocating below 4 GB for no good reason interferes with that.
This is especially important under virtualization, considering that each
*level* of lookup at stage 1 (the guest virtual page table) will result in
a full page table walk at stage 2 (the guest PA to host PA mapping).
So expose only the 64-bit entry point when the SMBIOS tables adhere to
version 3.0 or later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Here we add the memory space for the high memory nodes except the lowest
one in FDT. So these spaces will show up in the UEFI memory map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap at 79 chars, use NULL, print Status]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19124 6f19259b-4bc3-4df7-8a09-765794883524
Now that all PeiServicesTablePointerLib and PrePiHobListPointerLib
library dependencies in both ArmVirtQemu and ArmVirtXen are satisfied
by implementations that do not depend on ArmPlatformGlobalVariableLib,
we can remove all mention of it from the various .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18986 6f19259b-4bc3-4df7-8a09-765794883524
Beyond just changing the directly related lines in the FDF and DSC files,
we have to adapt the EarlyFdtPL011SerialPortLib and FdtPL011SerialPortLib
instances as well, in the same patch. This is because the EmbeddedPkg
driver expects the SerialPortSetAttributes(),
SerialPortSetControl() and SerialPortGetControl() functions from
SerialPortExtLib, while the MdeModulePkg driver expects them from
SerialPortLib itself.
We cannot implement these functions in ArmVirtPkg's SerialPortLib
instances *before* flipping the driver, because it would cause double
function definitions in the EmbeddedPkg driver. We also can't implement
the functions *after* flipping the driver, because it would cause
unresolved function references in the MdeModulePkg driver. Therefore
we have to implement the functions simultaneously with the driver
replacement.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18973 6f19259b-4bc3-4df7-8a09-765794883524
KVM uses a fixed size of 40 bits for its intermediate physical address
space, so there is no need to support anything beyond that even if the
host hardware does.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18928 6f19259b-4bc3-4df7-8a09-765794883524
A DMA-like transfer interface has recently been implemented in QEMU for
fw-cfg. For ARM and AARCH64 virtual machines, the binding prescribes a new
8-byte wide register at offset 0x10 in the register block. Make VirtFdtDxe
expose this register if it is present.
Please see "docs/specs/fw_cfg.txt" in the QEMU tree for more information.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18544 6f19259b-4bc3-4df7-8a09-765794883524
When MdeModulePkg/Universal/SmbiosDxe is instructed to compose & install
an SMBIOS 3.0 entry point, it keys the Docrev (specification document
revision) field of that structure off of PcdSmbiosDocRev. An upcoming
OvmfPkg patch will have OvmfPkg/Library/SmbiosVersionLib set this PCD
dynamically. Because we use that driver in the ArmVirtQemu.dsc platform,
we must provide a default for the dynamic PCD.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18181 6f19259b-4bc3-4df7-8a09-765794883524
The upcoming OvmfPkg patches will implicitly affect the ArmVirtQemu.dsc
build, necessitating a default value for the new dynamic
PcdQemuSmbiosValidated. Add it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18179 6f19259b-4bc3-4df7-8a09-765794883524
This reverts git commit d2733aa9 (SVN r18042), because it is empty now.
The original problem:
Many universal DXE drivers in edk2 can be controlled by setting dynamic
PCDs. Such a PCD must be set before the consumer DXE driver is
dispatched.
should be hereafter solved similarly to how
OvmfPkg/Library/SmbiosVersionLib is plugged into
MdeModulePkg/Universal/SmbiosDxe now (originally suggested by Jordan
Justen <jordan.l.justen@intel.com>).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18177 6f19259b-4bc3-4df7-8a09-765794883524
This patch de-duplicates the logic added in commit
ArmVirtPkg: QemuFwCfgToPcdDxe: set SMBIOS entry point version
dynamically
(git c98da334, SVN r18043) by hooking DetectSmbiosVersionLib into
SmbiosDxe.
Although said commit was supposed to work with SMBIOS 3.0 payloads from
QEMU, in practice that never worked, because the size / signature checks
in SmbiosVersionInitialization() would always fail, due to the SMBIOS 3.0
entry point being structurally different. Therefore this patch doesn't
regress ArmVirtPkg.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18176 6f19259b-4bc3-4df7-8a09-765794883524
The ARM build still needs an intermediate loader to boot Linux,
since ARM/Linux has no builtin UEFI boot stub (yet).
So add the LinuxLoader UEFI application to the FV, and enable
the FvSimpleFileSystemDxe driver so that we can invoke the
Linux loader from the shell, e.g.,
Shell> linuxloader fs2:zImage -c console=ttyAMA0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18155 6f19259b-4bc3-4df7-8a09-765794883524
ARM BDS support in ArmVirtQemu has been broken since SVN r17969
("ArmPkg/BdsLib: Remove Linux loader from BdsLib") dated July 14th.
Instead of fixing this, let's get rid of the ARM BDS and LinuxLoader
altogether: they violate both the UEFI spec and the arm64 Linux boot
protocol, and lack the level of integration with the QEMU command
line that the Intel BDS has when running under ArmVirtPkg or OvmfPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18153 6f19259b-4bc3-4df7-8a09-765794883524
In order to allow a ArmGicArchLib to be implemented that returns
the supported GIC revision based on the device tree, add handling
to VirtFdtDxe to record the GIC revision at DT parsing time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18101 6f19259b-4bc3-4df7-8a09-765794883524
(This patch parallels OvmfPkg commit 37baf06b (SVN r17676).)
PcdSmbiosVersion controls the version number of the SMBIOS entry point
table (and other, related things) that the universal
"MdeModulePkg/Universal/SmbiosDxe" driver, providing EFI_SMBIOS_PROTOCOL,
installs.
The "virt" machine type of QEMU generates SMBIOS payload for the firmware
to install. The payload includes the entry point table ("anchor" table).
OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is
the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe"
driver); however, we can parse the entry point version from QEMU's anchor
table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that
version.
As default for PcdSmbiosVersion we should keep the current 0x0300 value
(ie. SMBIOS 3.0) from "MdeModulePkg/MdeModulePkg.dec"; that spec version
was specifically created for ARM / AARCH64 needs.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18043 6f19259b-4bc3-4df7-8a09-765794883524
Many universal DXE drivers in edk2 can be controlled by setting dynamic
PCDs. Such a PCD must be set before the consumer DXE driver is dispatched.
(In general we assume that the DXE driver will consume the PCD in its
entry point, or in the constructor of a library instance it links against.
In special cases this requirement can be relaxed a bit, if we know that
the DXE driver accesses the PCD only in a protocol member function that it
exports.)
On the QEMU platform, the PCD values to be set for the universal drivers
are frequently derived from fw_cfg files that QEMU exports.
In OvmfPkg we tend to handle this in the following way:
- For IA32 and X64, OvmfPkg provides a QemuFwCfgLib instance that is
usable in PEI.
- In PlatformPei, fw_cfg files can be loaded and transformed to PCD
values.
- Any DXE driver is bound to be dispatched after the PEI phase is done.
(In specific cases other ordering solutions might be possible, via Depex
or protocol notify, etc.)
In ArmVirtPkg/ArmVirtQemu, things differ a bit:
- We don't have an ArmVirtPkg-specific ("Platform") PEIM. This is actually
a good thing for now, so let's not introduce one just for this purpose.
- Even if we had such a PEIM, it could not easily access fw_cfg: the MMIO
addresses of the fw_cfg device are available only in the DTB that QEMU
exports.
(Accordingly, our QemuFwCfgLib instance is restricted to DXE_DRIVER
modules: VirtFdtDxe parses the DTB, stores the fw_cfg addresses in PCDs,
and then QemuFwCfgLib's constructor fetches those PCDs.)
There are some examples in ArmVirtPkg where early code is forced to
parse the DTB manually, but those examples are all painful, and our goal
here (controlling universal DXE drivers) doesn't justify more of that
pain.
Therefore, introduce a separate, minimal DXE driver that is dispatched
strictly after VirtFdtDxe (so that it can use QemuFwCfgLib), and strictly
before other DXE drivers (so that it can set dynamic PCDs for them).
Because VirtFdtDxe is already ordered with the APRIORI DXE file, it is
simplest to do the same for the new driver.
Actual fw_cfg files and PCDs shall be accessed in future patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18042 6f19259b-4bc3-4df7-8a09-765794883524
Change default terminal type to be consistent with default
ConIn/ConOut device path, which is now determined by TTY_TERMINAL
flag, TTYTERM or VT100.
I can't say this is a bug, as we can pass the whole console device
path to ConnectController, and TerminalDxe driver will pick up the
terminal in the remaining device path. However, in rare circumstances,
the console devices may be disconnected with the driver, and they will
be ignored by ConPlatformDxe until we pass the device path explicitly
just as BDS.
Changing default terminal type to be the same with console device
path could help serial terminal be reconnected with normal connect
controller operation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
PcdDefaultBootType has been removed when the embedded
Linux Loader has been removed from BdsLib.
The boot arguments (defined by PcdDefaultBootArgument)
are now always targetting EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17972 6f19259b-4bc3-4df7-8a09-765794883524
Enable selecting the TtyTerminal type for the ARM BDS build of QEMU using
the TTY_TERMINAL define.
Convert INTEL_BDS define to check for value (!if) rather than just definition
(!ifdef) to allow setting of either value on command line.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17899 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Shannon Zhao
Star Zeng
Laszlo Ersek
Heyi Guo
Olivier Martin
Roy Franz