convert the list when transferring from physical to virtual mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14403 6f19259b-4bc3-4df7-8a09-765794883524
OvmfPkg's file-based NvVar storage is read back as follows at boot (all
paths under OvmfPkg/Library/):
PlatformBdsPolicyBehavior() [PlatformBdsLib/BdsPlatform.c]
PlatformBdsRestoreNvVarsFromHardDisk()
VisitAllInstancesOfProtocol
for each simple file system:
VisitingFileSystemInstance()
ConnectNvVarsToFileSystem() [NvVarsFileLib/NvVarsFileLib.c]
LoadNvVarsFromFs() [NvVarsFileLib/FsAccess.c]
ReadNvVarsFile()
+-------------> SerializeVariablesSetSerializedVariables() [SerializeVariablesLib/SerializeVariablesLib.c]
| SerializeVariablesIterateInstanceVariables()
| +-------------> IterateVariablesInBuffer()
| | for each loaded / deserialized variable:
| +-|-----------------> IterateVariablesCallbackSetSystemVariable()
| | | gRT->SetVariable()
| | |
| | IterateVariablesInBuffer() stops processing variables as soon as the
| | first error is encountered from the callback function.
| |
| | In this case the callback function is
| IterateVariablesCallbackSetSystemVariable(), selected by
SerializeVariablesSetSerializedVariables().
The result is that no NvVar is restored from the file after the first
gRT->SetVariable() failure.
On my system such a failure
- never happens in an OVMF build with secure boot disabled,
- happens *immediately* with SECURE_BOOT_ENABLE, because the first
variable to restore is "AuthVarKeyDatabase".
"AuthVarKeyDatabase" has the EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
attribute set. Since the loop tries to restore it before any keys (PK, KEK
etc) are enrolled, gRT->SetVariable() rejects it with
EFI_SECURITY_VIOLATION. Consequently the NvVar restore loop terminates
immediately, and we never reach non-authenticated variables such as
Boot#### and BootOrder.
Until work on KVM-compatible flash emulation converges between qemu and
OvmfPkg, improve the SECURE_BOOT_ENABLE boot experience by masking
EFI_SECURITY_VIOLATION in the callback:
- authenticated variables continue to be rejected same as before, but
- at least we allow the loop to progress and restore non-authenticated
variables, for example boot options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14390 6f19259b-4bc3-4df7-8a09-765794883524
Add the variable name size check in the RequestToLock wrapper.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14377 6f19259b-4bc3-4df7-8a09-765794883524
Add code in BdsDxe driver to call the protocol to mark the read-only variables defined in the UEFI Spec.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14372 6f19259b-4bc3-4df7-8a09-765794883524
DHCP, PXE, and StdLib socket apps are enabled in OVMF by the sum of:
(a) a UEFI NIC driver,
(b) the generic network stack.
The only choice for (a) used to be the proprietary Intel E1000 driver,
which is cumbersome to obtain and enable.
The iPXE UEFI NIC drivers packaged with qemu-1.5 cover (a) for each NIC
type supported by qemu, and are easy to obtain & configure, even for
earlier qemu versions. Therefore enable (b) per default as well.
This doesn't take up much space; the binaries (b) adds to the firmware
don't seem to need -D FD_SIZE_2MB.
Intel's e1000 driver remains an option, requested by the -D E1000_ENABLE
build flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14366 6f19259b-4bc3-4df7-8a09-765794883524
To be compliant with the UEFI specification it is required to update SERIAL_IO_MODE with the values set.
This prototype change allows to get the value used inside SerialPortSetAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14365 6f19259b-4bc3-4df7-8a09-765794883524
DecodeOneStateful: Properly handle combinations of Src, Dest, or Len being NULL or 0.
EncodeUtf8: Do not zero-terminate the result string in this worker function.
mbsrtowcs: Remove test for **src == '\0', as per ISO/IEC 9899:199409. Allows "".
wcsrtombs: The C Language standard, ISO/IEC 9899:199409, states that the wcsrtombs() function will stop before encountering the terminating NUL character only if Dest is NOT NULL. This implies that if Dest is NULL, the Limit parameter will be ignored. In order to avoid system hangs, if Dest is NULL a Limit value of ASCII_STRING_MAX is automatically used. Also fixed a typo in the function header comment.
With these changes, StdLib now passes all of the C Language Standards Compliance Tests for ISO/IEC 9899:199409 (C95).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: daryl.mcdaniel@intel.com
Reviewed-by: erik.c.bjorge@intel.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14358 6f19259b-4bc3-4df7-8a09-765794883524
SerialPortSetControl, SerialPortGetControl and SerialPortSetAttributes are functions
of the SerialPortExtLib library interface. They should not be implemented by the
SerialPortLib library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Andrew Fish <afish@apple.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14357 6f19259b-4bc3-4df7-8a09-765794883524
The descriptor table (also known as "queue") consists of descriptors. (The
corresponding type in the code is VRING_DESC.)
An individual descriptor describes a contiguous buffer, to be transferred
uni-directionally between host and guest.
Several descriptors in the descriptor table can be linked into a
descriptor chain, specifying a bi-directional scatter-gather transfer
between host and guest. Such a descriptor chain is also known as "virtio
request".
(The descriptor table can host sereval descriptor chains (in-flight virtio
requests) in parallel, but the OVMF driver supports at most one chain, at
any point in time.)
The first descriptor in any descriptor chain is called "head descriptor".
In order to submit a number of parallel requests (= a set of independent
descriptor chains) from the guest to the host, the guest must put *only*
the head descriptor of each separate chain onto the Available Ring.
VirtioLib currently places the head of its one descriptor chain onto the
Available Ring repeatedly, once for each single (head *or* dependent)
descriptor in said descriptor chain. If the descriptor chain comprises N
descriptors, this error amounts to submitting the same entire chain N
times in parallel.
Available Ring Descriptor table
Ptr to head ----> Desc#0 (head of chain)
Ptr to head --/ Desc#1 (next in same chain)
... / ...
Ptr to head / Desc#(N-1) (last in same chain)
Anatomy of a single virtio-blk READ request (a descriptor chain with three
descriptors):
virtio-blk request header, prepared by guest:
VirtioAppendDesc PhysAddr=3FBC6050 Size=16 Flags=1 Head=1232 Next=1232
payload to be filled in by host:
VirtioAppendDesc PhysAddr=3B934C00 Size=32768 Flags=3 Head=1232 Next=1233
host status, to be filled in by host:
VirtioAppendDesc PhysAddr=3FBC604F Size=1 Flags=2 Head=1232 Next=1234
Processing on the host side -- the descriptor chain is processed three
times in parallel (its head is available to virtqueue_pop() thrice); the
same chain is submitted/collected separately to/from AIO three times:
virtio_queue_notify vdev VDEV vq VQ#0
virtqueue_pop vq VQ#0 elem EL#0 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#0
virtqueue_pop vq VQ#0 elem EL#1 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#1
virtqueue_pop vq VQ#0 elem EL#2 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#2
virtio_blk_rw_complete req REQ#0 ret 0
virtio_blk_req_complete req REQ#0 status 0
virtio_blk_rw_complete req REQ#1 ret 0
virtio_blk_req_complete req REQ#1 status 0
virtio_blk_rw_complete req REQ#2 ret 0
virtio_blk_req_complete req REQ#2 status 0
On my Thinkpad T510 laptop with RHEL-6 as host, this probably leads to
simultaneous DMA transfers targeting the same RAM area. Even though the
source of each transfer is identical, the data is corrupted in the
destination buffer -- the CRC32 calculated over the buffer varies, even
though the origin of the transfers is the same, never rewritten LBA.
SynchronousRequest Lba=585792 BufSiz=32768 ReqIsWrite=0 Crc32=BF68A44D
The problem is invisible on my HP Z400 workstation.
Fix the request submission by:
- building the only one descriptor chain supported by VirtioLib always at
the beginning of the descriptor table,
- ensuring the head descriptor of this chain is put on the Available Ring
only once,
- requesting the virtio spec's language to be cleaned up
<http://lists.linuxfoundation.org/pipermail/virtualization/2013-April/024032.html>.
Available Ring Descriptor table
Ptr to head ----> Desc#0 (head of chain)
Desc#1 (next in same chain)
...
Desc#(N-1) (last in same chain)
VirtioAppendDesc PhysAddr=3FBC6040 Size=16 Flags=1 Head=0 Next=0
VirtioAppendDesc PhysAddr=3B934C00 Size=32768 Flags=3 Head=0 Next=1
VirtioAppendDesc PhysAddr=3FBC603F Size=1 Flags=2 Head=0 Next=2
virtio_queue_notify vdev VDEV vq VQ#0
virtqueue_pop vq VQ#0 elem EL#0 in_num 2 out_num 1
bdrv_aio_readv bs BDRV sector_num 585792 nb_sectors 64 opaque REQ#0
virtio_blk_rw_complete req REQ#0 ret 0
virtio_blk_req_complete req REQ#0 status 0
SynchronousRequest Lba=585792 BufSiz=32768 ReqIsWrite=0 Crc32=1EEB2B07
(The Crc32 was double-checked with edk2's and Linux's guest IDE driver.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14356 6f19259b-4bc3-4df7-8a09-765794883524
* Fix name of 'device_type' and 'migrate' properties.
* Fix 'reg' property. It is supposed to contain the CPU MPIDR of the
CPU being described.
* Fix byte ordering of data in 'psci' node.
* Fix some problems regarding the size of data. In a number of places
it was assumed data would be 32-bits wide.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14351 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Star Zeng
Jaben Carsey
jcarsey
Tian, Hot
Eric Dong
Chao Zhang
Gary Ching-Pang Lin
Ryan Harkin
tye1
jcarsey
jljusten
ydong10
lgao4
lzeng14
niruiyu
sfu5
darylm503
oliviermartin