SMM Profile start can be started early in SMM CPU EntryPoint
since page table for SMM profile is ready.
No need wait smm ready to lock.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
For MM:
SMRAM & PageTable itself & SMM Paging State shall be configured
once the gEdkiiPiMmMemoryAttributesTableGuid is installed by
SMM core. It will happen after MmIpl.Entrypoint.
PerformRemainingTasks will be called before MmIpl.Entrypoint
exit.
For SMM:
SMRAM & PageTable itself & SMM Paging State are still
configured in the first SMI when SMM ready to lock happen.
So, this patch is to differentiate PerformRemainingTasks for MM
and SMM.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
This patch adds the PiCpuStandaloneMmEntry for MM, which is
the module Entry Point of the CPU StandaloneMm driver.
In the Entry Point:
1. Init the mIsStandaloneMm flag
2. Call PiSmmCpuEntryCommon
3. Init SmiCommandPort
4. Install the SMM Configuration Protocol.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdCpuMaxLogicalProcessorNumber),
so move the PCD usage to DxeSmm.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
Define the mIsStandaloneMm to indicate it's the MM_STANDALONE MM CPU
driver or DXE_SMM_DRIVER SMM CPU driver execution.
With mIsStandaloneMm, GetMpInformationFromMpServices() can be skipped
for the MM CPU since it can not call the
GetMpInformationFromMpServices() due to the NON-SMM MP Services usage
for the MP Information.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not call EfiLocateFirstAcpiTable to get the system
port address of the SMI Command Port. This patch just hard-code
to 0xB2 for MM CPU.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdCpuSmmSyncMode &
PcdCpuSmmApSyncTimeout & PcdCpuSmmApSyncTimeout2), so, it
consumes the gMmCpuSyncConfigHobGuid for RelaxedApMode &
Timeout & Timeout2.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdAcpiS3Enable), so, it
consumes the gMmAcpiS3EnableHobGuid to get ACPI S3 enable flag.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
This patch adds the empty .c for MM CPU specific implementation：
NonMmramMapStandaloneMm.c
PiSmmCpuStandaloneMm.c
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
Jiaxin Wu