Update the TCG Spec in the the EFI_TCG_SERVER_ACPI_TABLE from TCG 1.0 to
TCG 1.2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19729 6f19259b-4bc3-4df7-8a09-765794883524
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19722 6f19259b-4bc3-4df7-8a09-765794883524
TCG event log and TCG2 final event log area length can be configurable to meet platform event log
requirement.
PcdTcgLogAreaMinLen : 0x10000 based on minimum requirement in TCG ACPI Spec 00.37
PcdTcg2FinalLogAreaLen : 0x8000 based on experience value
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19639 6f19259b-4bc3-4df7-8a09-765794883524
Debug messages are using a format strings with %s for
a Unicode string, but the strings being printed are
ASCII strings and this results in corrupted debug
messages. Change the the format string to use %a
instead of %s.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19617 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
Correct the variable measurement behavior to include whole EFI_VARIABLE_DATA structure.
It is for the latest spec compliance
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17980 6f19259b-4bc3-4df7-8a09-765794883524
If TPM error happens, set TPM flag to NOT present, so that trusted boot patch is disabled.
Also report status code for failure, so that platform may register handler to apply policy like force system reset, or disable TPM permanently.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Dong, Guo" <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16598 6f19259b-4bc3-4df7-8a09-765794883524
ASSERT for SetupEventLog is kept. It is the foundation of TcgProtocol and TrEEProtocol
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16281 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16050 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15951 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15950 6f19259b-4bc3-4df7-8a09-765794883524
1. Refine comments to remove the unrecognized code.
2. Add code to avoid potential data type change.
3. In inf file, add module type to the library class list.
Signed-off-by: ydong10
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12284 6f19259b-4bc3-4df7-8a09-765794883524
Samer El-Haj-Mahmoud
Michael Kinney
Chao Zhang
Jordan Justen
Yao, Jiewen
Gao, Liming
Dong, Guo
Eric Dong
jyao1
Star Zeng
czhang46
gdong1
rsun3
ydong10