Ip4Config2 protocol implementation must request for DNS server info when the
policy is set to DHCP. And when a DHCP server responds to it with a list of
DNS server addresses, it must parse it and set it for the instance. Without
this, nobody can do a Ip4Config->GetData for DNS server IPs before calling
Dns->Configure(). This will mean a DHCP is initiated when calling
Dns->Configure(), thus causing serious performance issues. This patch
attempts to address this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18560 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
DHCP policy is applied as default at boot time on all NICs in the system, which results
in all NIC ports attempting DHCP and trying to acquire IP addresses during boot.
Ip4 driver should only set dhcp as default policy, and not trigger DORA at driver binding
start(). We should start DORA until one IP child is configured to use default address.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18201 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Jin Eric <eric.jin@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14682 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
GCC 4.6 generates a warning when a variable is set,
but never used.
Signed-off-by: jljusten
Reviewed-by: lgao4
Reviewed-by: erictian
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12617 6f19259b-4bc3-4df7-8a09-765794883524
2. In IPsec driver it wrongly use the HeadLen to calculate the IP header length after the IPsec process. Correct this mistake.
Signed-off-by: qianouyang
Reviewed-by: jjin9
Reviewed-by: ZhangCaoIntel
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11824 6f19259b-4bc3-4df7-8a09-765794883524
1. add library function NetLibDetectMedia to NetLib for media detection
2. update MnpDxe to periodically poll for media status update and check for media status before packet transmit
3. update Ip4Dxe to return ModeData using Mnp->GetModeData()
4. update IScsiDxe to check for media status before try to do DHCP and session login
5. update UefiPxeBcDxe to check for media status before PXE start
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9919 6f19259b-4bc3-4df7-8a09-765794883524
1. Add GLOBAL_REMOVE_IF_UNREFERENCED to all globals
2. Update NTOHL and NTOHS to be BaseLib func SwapBytes32/SwapBytes16
3. Remove duplicate NET_SWAP_SHORT (to use NTOHS instead)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9648 6f19259b-4bc3-4df7-8a09-765794883524
2. Integrate IPsec functionality to IP4 driver.
3. Move IP_VERSION_4/IP_VERSION_6 definition from IpIoLib to NetLib.
4. Move the Ip6/Udp6 protocol declaration from driver INF to Library INF (DxeIpIoLib and DxeUdpIoLib) for better readability.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9413 6f19259b-4bc3-4df7-8a09-765794883524
1. Update NetLib to a combined NetLib support dual network stack:
1) Add Network Debug facility for IPv4 stack.
2) Extend the library APIs to support IPv6 stack:
a. NetIp6IsUnspecifiedAddr
b. NetIp6IsLinkLocalAddr
c. NetIp6IsNetEqual
d. NetLibCreateIPv6DPathNode.
e. NetIp6PseudoHeadChecksum
f. NetIp6IsValidUnicast
3) Update the structure definitions:
a. Update NET_BUF to add EFI_IP6_HEADER and EFI_UDP_HEADER
b. Add NET_IP6_PSEUDO_HDR
4) Update Ip4IsUnicast to NetIp4IsUnicast
2. Update the impacted modules to adopt the combined NetLib.
3. Clean up coding style errors in all network drivers and libraries.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9391 6f19259b-4bc3-4df7-8a09-765794883524
Liming Gao
Jordan Justen
Samer El-Haj-Mahmoud
Samer El-Haj-Mahmoud
Jiaxin Wu
fanwang2
Zeng, Star
Fu, Siyuan
Eric Dong
sfu5
ydong10
jljusten
niruiyu
qianouyang
andrewfish
hhuan13
xdu2
hhtian
geekboy15a
lgao4
tye1
vanjeff
tye
mdkinney