The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Our UEFI guest firmware takes ownership of the emulated NOR flash in
order to support the variable runtime services, and it does not expect
the OS to interfere with the underlying storage directly. So disable
the NOR flash DT nodes as we discover them, in a way similar to how we
disable the PL031 RTC in the device tree when we attach our RTC runtime
driver to it.
Note that this also hides the NOR flash bank that carries the UEFI
executable code, but this is not intended to be updatable from inside
the guest anyway, and if it was, we should use capsule update to do so.
Also, the first -pflash argument that defines the backing for this flash
bank is often issued with the 'readonly' modifier, in order to prevent
any changes whatsoever to be made to the executable firmware image by
the guest.
This issue has become relevant due to the following Linux changes,
which enable the flash driver stack for default build configurations
targetting arm64 and 32-bit ARM.
ce693fc2a877
("arm64: defconfig: Enable flash device drivers for QorIQ boards", 2020-03-16).
5f068190cc10
("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH", 2019-04-03)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
We don't distribute UEFI_DRIVER modules stand-alone that were built as
part of an ArmVirtQemu* platform. ArmVirtQemu* UEFI_DRIVERs are allowed to
inherit platform dependencies.
By enabling UEFI_DRIVERs to consume QemuFwCfgLib, we can hook fw_cfg-based
NULL class libraries into UEFI drivers, e.g. in order to set dynamic PCDs.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtGicArchLib was originally implemented before virtualization
emulation was implemented in QEMU, and the GICv2 model implemented only
the physical copy of control registers.
Enabling virtualization emulation to QEMU adds also the virtual copy,
doubling the RegSize returned by FindCompatibleNodeReg () in
ArmVirtGicArchLibConstructor (). This triggered an ASSERT when running
QEMU with -M virt,virtualization=on. Address this by testing for both
possible valid values of RegSize.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2588
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the QEMU loader file system implementation inside this library,
and switch to the separate QemuLoadImageLib library and the associated
driver to expose the kernel and initrd passed via the QEMU command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Implement a ArmVirtPkg specific version of the PSCI ResetSystemLib that
is usable in the PEI phase, as the existing one relies on the FDT client
protocol, making it unsuitable.
Note that accessing the device tree passed by QEMU via its initial base
address is guaranteed to be safe at any time during the PEI phase, so we
can defer discovery of the PSCI method until the time the reset library
is actually invoked (which is rarely)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Similar to what we now do for OVMF, we need to consider the possibility
that PlatformBootManagerWaitCallback () may be called with a
PcdPlatformBootTimeOut that was set to zero, in which case the call should
simply return.
We also change the initial timeout variable name to make the code explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-3-pete@akeo.ie>
The LoadImage() boot service is a bit unusual in that it allocates
resources in a particular failure case; namely, it produces a valid
"ImageHandle" when it returns EFI_SECURITY_VIOLATION. This is supposed to
happen e.g. when Secure Boot verification fails for the image, but the
platform policy for the particular image origin (such as "fixed media" or
"removable media") is DEFER_EXECUTE_ON_SECURITY_VIOLATION. The return code
allows platform logic to selectively override the verification failure,
and launch the image nonetheless.
ArmVirtPkg/PlatformBootManagerLib does not override EFI_SECURITY_VIOLATION
for the kernel image loaded from fw_cfg -- any LoadImage() error is
considered fatal. When we simply treat EFI_SECURITY_VIOLATION like any
other LoadImage() error, we leak the resources associated with
"KernelImageHandle". From a resource usage perspective,
EFI_SECURITY_VIOLATION must be considered "success", and rolled back.
Implement this rollback, without breaking the proper "nesting" of error
handling jumps and labels.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Fixes: 23d04b58e2
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Move XenRealTimeClockLib from ArmVirtPkg to OvmfPkg so it can be used
from the OvmfPkg by the following patch, "OvmfPkg/OvmfXen: use
RealTimeClockRuntimeDxe from EmbeddedPkg"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-35-anthony.perard@citrix.com>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-3-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[lersek@redhat.com: drop "from MdeModulePkg" from the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Use the new ArmLib helper to read the CPU's physical address limit
so we can drop our own homecooked one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, we map DRAM as EFI_MEMORY_WB, and the remainder of the
entire virtual address space is mapped with EFI_MEMORY_UC attributes,
regardless of whether any devices actually reside there.
Now that we are relaxing the address space limit to more than 40 bits,
mapping all that address space actually takes up more space in page
tables than we have so far made available as temporary RAM. So let's
get rid of the mapping rather than increasing the available RAM, given
that the mapping is not particularly useful anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Up until now, we have been getting away with not declaring the ECAM
and translated I/O spaces at all in the GCD memory map, simply because
we map the entire address space with device attributes in the early PEI
code, and so the ECAM space will be mapped wherever it ends up.
Now that we are about to make changes to how ArmVirtQemu reasons
about the size of the address space, it would be better to get rid
of this mapping of the entire address space, since it can get
arbitrarily large without real benefit.
So start by mapping the ECAM and translated I/O spaces explicitly,
instead of relying on the early PEI mapping.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, permitting it
to be used as an intermediary loader when running QEMU with secure
world emulation enabled, in which case NOR flash bank #0 is secure
only and contains the secure world firmware. In this case,
NorFlashQemuLib should not expose the first flash bank at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Virtio RNG devices are never boot devices, so in commit ff1d0fbfba we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit ff1d0fbfba removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: ff1d0fbfba
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround for KVM timer
handling") removed the virtual timer handling quirk that cleared the
mask bit in the control register when enabling the timer, under the
assumption that only ancient KVM host implementations required it.
However, Julien reports that Xen also masks the timer interrupt in the
guest view of the timer control register, and therefore needs the same
quirk.
So let's reinstate it, but using a Xen specific implementation of the
timer support library, so that other virt platforms remain unchanged.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Move the TryRunningQemuKernel() call back to its original place. This
improves the UEFI boot time for VMs that have "-kernel", many disks or
NICs, and no "bootindex" properties. A well-known example is
guestfish/libguestfs.
For more info on the TryRunningQemuKernel() location, see the following
commits: 23d04b58e2, a78c4836ea, 158990b941.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The header file declares TryRunningQemuKernel(), defined in "QemuKernel.c"
and called from "PlatformBm.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These libraries are no longer used, so remove them from the tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new ArmVirtMemInfoLib library to retrieve DRAM information
from the platform, so that we can phase out ArmPlatformLib going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The QemuVirtMemInfoLib ArmVirtMemInfoLib implementation created for
ArmVirtQemuKernel does exactly what we need for ArmVirtQemu, the only
difference being that the latter is PrePeiCore based, and so it uses
a different method to ensure that PcdSystemMemorySize is set when
ArmVirtGetMemoryMap() is called.
On ArmVirtQemu, we currently abuse the implied ordering guarantees
provided by ArmPlatformLib, by implementing this as follows:
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf [ArmVirtPkg/ArmVirtQemu.dsc]
InitializeMemory() [ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c]
ArmPlatformInitializeSystemMemory() [ArmVirtPkg/Library/ArmVirtPlatformLib/Virt.c]
//
// set PcdSystemMemorySize from the DT
//
MemoryPeim() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
InitMmu() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
ArmPlatformGetVirtualMemoryMap() [ArmVirtPkg/Library/ArmVirtPlatformLib/VirtMem.c]
//
// consume PcdSystemMemorySize
//
Given that we are trying to get rid of ArmPlatformLib, or at least remove
some of these API functions that are never used for their original purpose
by any platforms, we need to move the PCD assignment elsewhere.
So create a PEIM-only version of QemuVirtMemInfoLib especially for
ArmVirtQemu, and add the PCD assignment code to its constructor.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Create a new ArmVirtMemInfoLib for ArmVirtQemuKernel by cloning the
existing ArmPlatformGetVirtualMemoryMap () for this platform,
(ArmQemuRelocatablePlatformLib *not* ArmVirtPlatformLib), and cleaning
it up:
- remove support for uncached DRAM mappings
- replace EFI_D_xxx with DEBUG_xxx throughout
- use a temp variable to hold the top of the physical address space
- use AllocatePool () instead of AllocatePages (), given that we use
160 bytes only, and the memory is never freed.
In a future patch, we will add this library to the ordinary ArmVirtQemu
platform as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Clone the existing ArmPlatformGetVirtualMemoryMap () for this platform,
clean it up slightly (by using a static buffer rather than a heap
allocation, and removing the support for uncached DRAM mappings), and
turn it into a new ArmVirtMemInfoLib implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
QEMU/KVM has very little tolerance for using anything except writeback
cacheable mappings of DRAM, so let's remove the 'feature' that allows
us to select uncached mappings at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Switch to the new, cleaned up PL011UartLib implementation so we will
be able to remove the old one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the PL031 RTC driver library no longer depends on the ARM
platform specific ArmPlatformSysConfigLib, we no longer need to
implement ArmPlatform.h or have a resolution for that library.
This allows us to get rid of a rather dodgy practice of including
platform headers using compiler flags, which is a bad idea at various
levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
With the SerialDxe change in commit 4cf3f37c87 ("MdeModulePkg SerialDxe:
Process timeout consistently in SerialRead", 2017-07-18), setting
EFI_SERIAL_INPUT_BUFFER_EMPTY in the "Control" output parameter, in the
GetControl() SerialPortLib function, is no longer a "small optimization".
Namely, due to the SerialDxe change, the GetOneKeyFromSerial() call in
TerminalDxe's TerminalConInTimerHandler() can take very long if the input
queue is empty, even if GetOneKeyFromSerial()'s return value causes the
loop to be exited right after, in the first iteration.
This issue causes a boot hang in ArmVirtQemu: with the input queue empty,
TerminalConInTimerHandler() takes so long to return that, by the time it
returns, there's another execution queued already (due to the associated
timer event being signaled meanwhile). The boot process is stuck in the
timer event handler.
Therefore even the first GetOneKeyFromSerial() iteration must be prevented
in TerminalConInTimerHandler() if the input queue is empty, and that
requires implementing GetControl() for real.
Implement the SetAttributes(), SetControl() and GetControl() APIs (of
SerialPortExtLib origin) in FdtPL011SerialPortLib with calls to matching
PL011UartLib functions. This follows the example of
"ArmPlatformPkg/Library/PL011SerialPortLib" and also matches Star's
original idea under [1].
The patch can be considered a continuation of commit ad7f6bc2e1
("ArmVirtPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg",
2015-11-26), based on the mailing list threads [1] [2] [3].
[1] http://mid.mail-archive.com/1447752930-32880-12-git-send-email-star.zeng@intel.com
[2] http://mid.mail-archive.com/1448243067-1880-12-git-send-email-star.zeng@intel.com
[3] http://mid.mail-archive.com/b748580c-cb51-32c9-acf9-780841ef15da@redhat.com
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Heyi Guo <guoheyi@huawei.com>
Cc: Star Zeng <star.zeng@intel.com>
Originally-suggested-by: Star Zeng <star.zeng@intel.com>
Reported-by: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
For obscure reasons, ARM platforms use a different implementation of
the ResetSystem() runtime service call than other platforms. So let's
switch all ArmVirtPkg platforms to the generic version instead.
Given that all platforms use an implementation of EfiResetSystemLib [as
consumed by the ResetRuntimeDxe in EmbeddedPkg that we are replacing]
which is unlikely to be depended upon by out of tree platforms, let's
simply modify this library into an implementation of ResetSystemLib
instead [which is what the generic driver in MdeModulePkg consumes]
This does mean we need to update all clients at the same time, which
is why all changes are part of the same patch.
As before, warm reset and platform specific reset are mapped onto
cold reset (which is the only thing PSCI implements, at least the
version we depend on). The new library function EnterS3WithImmediateWake()
is left unimplemented, as permitted by the ResetSystemLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain DT nodes whose status is set to 'secure'. Similarly, the
status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain DT nodes whose status is set to 'secure'. Similarly, the
status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for our platforms.
So instead, use the new symbolic GUID added for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
At this point we're ready to retire QemuFwCfgS3Enabled() from the
QemuFwCfgLib class, together with its implementations in:
- ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
- OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
Extend all modules that call the function with a new QemuFwCfgS3Lib class
dependency. Thanks to the previously added library class, instances, and
class resolutions, we can do this switch now as tightly as possible.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Disable the PL031 RTC DT node unconditionally rather than only when
the DT will be exposed to the OS. This allows us to defer the decision
whether to expose it to the OS to a later time without creating an
additional dependency on the FDT client code by the RTC driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We are now sufficiently equipped to implement the new QemuFwCfgSkipBytes()
API.
The previous patch and this one enable ArmVirtPkg/QemuFwCfgLib to
overwrite part of a writeable fw_cfg file, which will be particularly
useful for the upcoming QEMU_LOADER_WRITE_POINTER command in
OvmfPkg/AcpiPlatformDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We use the "InternalQemuFwCfgReadBytes" static function pointer to
dispatch the reading of fw_cfg bytes between MMIO and DMA. This pointer is
initialized to MMIO, and we set it to DMA in the library constructor if
DMA is available.
Unlike the above, we write fw_cfg bytes only with MMIO at the moment.
Extend the write functionality so that it follows the read pattern:
- introduce the new function typedef WRITE_BYTES_FUNCTION,
- extract the current (MMIO-only) write internals from
QemuFwCfgWriteBytes() to MmioWriteBytes(),
- provide a DMA-based implementation in DmaWriteBytes() -- a thin wrapper
around DmaTransferBytes(),
- set the new static function pointer "InternalQemuFwCfgWriteBytes"
according to the DMA feature provided by QEMU,
- In QemuFwCfgWriteBytes(), call the best available method through
"InternalQemuFwCfgWriteBytes".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The DmaReadBytes() function that we currently use only for reading --
through the InternalQemuFwCfgReadBytes function pointer, in case the DMA
interface is available -- is suitable with minimal changes for two more
operations provided by the DMA interface, WRITE and SKIP. Expose the
Control parameter in the function prototype, rename the function to
DmaTransferBytes(), and rebase DmaReadBytes() to it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InternalQemuFwCfgIsAvailable() is an API that is incorrectly exposed by
the "OvmfPkg/Include/Library/QemuFwCfgLib.h" library class header; the API
is meant to be used internally to library instances (if it's needed at
all). ArmVirtPkg's instance has no use for it actually, so simplify the
code and remove the function definition.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=165
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # RVCT
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Since All the GIC base address variables has been aligned to 64-bit, it
doesn't make sense to continue use MAX_UINT32 in ASSERT() statement, so
this patch uses MAX_UINTN to adapt to this kind of change.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Prototype of BootLogoEnableLogo will change in following patches, so
do not call BootLogoEnableLogo to avoid build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The FDT client protocol methods dealing with "reg" properties return
the size of a "reg" element. Currently, we have hardcoded this as '8',
since #address-cells == #size-cells == 2 in most cases. However, for
different values, have a single 'reg' element size is not unambiguous,
since - however unlikely - if #address-cells != #size-cells, we do not
know which is which.
So before adding more methods to the protocol, fix up this oversight.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When parsing the device tree to find the memory node, we are still running
with the MMU off, which means unaligned memory accesses are not allowed.
Since the FDT only mandates 32-bit alignment, 64-bit quantities are not
guaranteed to appear naturally aligned, and so should be accessed using
32-bit accesses instead.
Reported-by: Julien Grall <julien.grall@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In general, on an ARM system, mapping normal memory as device memory may
have unintended side effects, given that unaligned accesses or loads and
stores with special semantics (e.g., load/store exclusive) may fault or
may not work as expected.
Under KVM, the situation is even worse, since the host may not expect the
guest to perform uncached accesses, and so writes to such an uncached
region may get lost completely.
Since the only safe mapping type under KVM is EFI_MEMORY_WB, remove all
other memory type attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
According to the ACPI 6.0/6.1 spec, the physical base address of GICC,
GICD, GICR and GIC ITS is 64-bit. So change the type of the various GIC
base address PCDs to 64-bit, and fix up all users.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that the PCI root bridge driver and various host controller drivers
have been fixed, remove the 4 GB limit on PCI DMA allocation for QEMU's
ECAM PCI host bridge.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
GCC 4.8 in RELEASE mode complains about GetPciIoTranslation () potentially
not assigning IoTranslation, but does not notice that it returns failure in
this case, which means IoTranslation is never referenced *unless* it has
been assigned. So simply set IoTranslation to zero to help the compiler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
If the pci-host-ecam-generic DT node describes a 64-bit MMIO region,
account for it in the PCI_ROOT_BRIDGE description that we return to
the generic PciHostBridgeDxe implementation, which will be able to
allocate BARs from it without any further changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=65
Implement PciHostBridgeLib for DT platforms that expose a PCI root bridge
via a pci-host-ecam-generic DT node. The DT parsing logic is copied from
the PciHostBridgeDxe implementation in ArmVirtPkg, with the one notable
difference that we don't set some of the legacy PCI attributes for IDE
and VGA I/O ranges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=65
Add handling of the PcdPciIoTranslation PCD, so that modules that include
this library via NULL resolution are guaranteed that it will be set before
they reference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=65
This updates all assembly source files under ArmVirtPkg to mark
exported functions as ASM_FUNC(), which puts them in a separate
section, allowing the linker to prune code that is left unused.
At the same time, clean up the code to get rid of LoadConstantToReg()
instances involving symbol references, each of which emits an absolute
literal, and hence and entry in the PE/COFF .reloc table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
(This patch ports OvmfPkg commit 2eb3589860 to ArmVirtPkg. That
functionality was not added to QemuBootOrderLib, because it was (and is)
independent from QEMU and fw_cfg.)
Remove any boot options that point to binaries built into the firmware and
have become stale due to any of the following:
- FvMain's base address or size changed (historical -- see commit
e191a3114f),
- FvMain's FvNameGuid changed,
- the FILE_GUID of the pointed-to binary changed,
- the referenced binary is no longer built into the firmware.
For example, multiple such "EFI Internal Shell" boot options can coexist.
They technically differ from each other, but may not describe any built-in
shell binary exactly. Such options can accumulate in a varstore over time,
and while they remain generally bootable (thanks to the efforts of
BmGetFileBufferByFvFilePath()), they look bad.
Filter out any stale options.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: https://github.com/tianocore/edk2/issues/107
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch ports Gary's OvmfPkg commit 14b2ebc30c to ArmVirtPkg.
Turns out Gary's argument in 14b2ebc30c is not only valid for Xen. The
same situation arises with QEMU if:
- the user specifies no boot order via fw_cfg at all (so QemuBootOrderLib
won't touch the boot order), and
- the varstore file has just been created from the varstore template.
In this case the user is dropped to the UEFI shell (because the shell is
registered earlier than all the auto-generated options), which is likely
not what the user wants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The interface to PL011UartInitializePort has changed in
ArmPlatformPkg/Drivers/PL011Uart with the title:
"ArmPlatformPkg: Add support to configure PL011 UART clock"
This patch updates the calls to PL011UartInitializePort(), in line with
that change, adding a parameter value using the PCD previously used
directly by the driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtPkg's Platform BDS has never had a progress bar. We can easily add
one, by copying the PlatformBootManagerWaitCallback() function verbatim
from
Nt32Pkg/Library/PlatformBootManagerLib/PlatformBootManager.c
It can be tested by passing the following option to QEMU (5 seconds):
-boot menu=on,splash-time=5000
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the course of porting ArmVirtPkg to the MdeModulePkg BDS, commit
1f73aef50c
ArmVirtPkg/PlatformBootManagerLib: add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 1f73aef50c, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
UefiBootManagerLib does not provide these functions, we have to implement
them. (EnableQuietBoot() puts up the nice TianoCore logo.)
OvmfPkg commits 817fb3ac2a and 8e8fd30377 have extracted these
functions already,
- from "IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c"
- to "OvmfPkg/Library/PlatformBootManagerLib/QuietBoot.c".
Copy the latter file, with minimal changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
QemuBootOrderLib can only filter out and reorder boot options; it cannot
create boot options. It relies on Platform BDS to auto-generate all
possible boot options first (for example, for new virtual devices that
have been configured since the last run of the virtual machine). Then it
will decide, case-by-case, whether each of those auto-generated boot
options should be preserved (and at what position), or removed.
Thus far, the only implementation of SetBootOrderFromQemu(), used in
connection with IntelFrameworkModulePkg BDS, has expected said complete
boot option list as an input parameter:
BdsEntry() [IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c]
// create empty list
InitializeListHead (
&BootOptionList
)
PlatformBdsPolicyBehavior( [ArmVirtPkg/Library/PlatformIntelBdsLib/IntelBdsPlatform.c]
BootOptionList
)
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(
BootOptionList
)
// at this point, BootOptionList starts with the preexistent boot
// options, and ends with the auto-generated options
SetBootOrderFromQemu( [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
BootOptionList
)
// write out changed boot order to UEFI variables
// The "BootOrder" variable may have changed. Refresh BootOptionList
// from it, and return it to BdsEntry().
With MdeModulePkg BDS, a BootOptionList is not propagated from BdsEntry()
to SetBootOrderFromQemu() and back. All processing is based directly on
the underlying "BootOrder" and "Boot####" variables.
In OvmfPkg, commit d27ec22d11 introduced a new instance of
QemuBootOrderLib, called QemuNewBootOrderLib. It is based on
UefiBootManagerLib, and rather than taking a complete BootOptionList as a
parameter, it expects that the "BootOrder" and "Boot####" variables are
complete in the above sense.
Rebase the boot order manipulation to UefiBootManagerLib and
QemuNewBootOrderLib, while keeping the requirement satisfied, like this:
BdsEntry() [MdeModulePkg/Universal/BdsDxe/BdsEntry.c]
PlatformBootManagerAfterConsole() [ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c]
EfiBootManagerConnectAll()
EfiBootManagerRefreshAllBootOption()
// at this point all auto-generated options exist at the end of
// "BootOrder"
SetBootOrderFromQemu() [OvmfPkg/Library/QemuNewBootOrderLib/QemuBootOrderLib.c]
// read boot options from "BootOrder" and "Boot####", then
// manipulate them
This patch parallels OvmfPkg commit 04fe914ba5.
Once the USE_OLD_BDS fallback is removed from OvmfPkg, the parameter list
of the SetBootOrderFromQemu() prototype can be updated to VOID.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Register the Enter key as the continue key (hot key to skip the boot
timeout). Map the F2 and ESC keys to the UI. Register the memory-mapped
Shell boot option.
The patch parallels OvmfPkg commit 07dd96e820. The
PlatformRegisterFvBootOption() and PlatformRegisterOptionsAndKeys()
functions are copied almost verbatim. The only changes are: internal
linkage for these functions (i.e., STATIC), and mentioning the ESC key in
the comments.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
MdeModulePkg/BDS doesn't launch the UI (Boot Manager Menu) from the
platform side. The platform is expected to store the boot timeout only, in
PcdPlatformBootTimeOut. This is usually done in
PlatformBootManagerBeforeConsole().
(ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg, not ArmVirtPkg.)
The patch parallels OvmfPkg commit 8dc0f0a6aa.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
With IntelFrameworkModulePkg BDS, the platform code is responsible for
updating console variables (e.g., with BdsLibUpdateConsoleVariable()), and
then connecting them (e.g., with BdsLibConnectAllDefaultConsoles()). This
is usually (although not necessarily) done in PlatformBdsPolicyBehavior().
With MdeModulePkg BDS, the platform is responsible for updating the
console variables in PlatformBootManagerBeforeConsole(). When that
function returns, BdsEntry() will automatically connect the consoles; the
platform is not responsible for the connection.
IntelFrameworkModulePkg MdeModulePkg
BdsEntry BdsEntry
PlatformBdsInit PlatformBootManagerBeforeConsole
+----> EfiBootManagerUpdateConsoleVariable
|
dispatch Driver#### | dispatch Driver####
| +> connect consoles
| |
PlatformBdsPolicyBehavior | | PlatformBootManagerAfterConsole
BdsLibUpdateConsoleVariable <--+ |
BdsLibConnectAllDefaultConsoles <+
display splash screen display splash screen
Thus, move the console variable massaging from the beginning of
PlatformBootManagerAfterConsole() (originally PlatformBdsPolicyBehavior())
to the end of PlatformBootManagerBeforeConsole(), and drop the explicit
BdsLibConnectAllDefaultConsoles() call.
This patch parallels OvmfPkg commit e9e9ad644f.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
The general BDS helper functions are now provided by MdeModulePkg's
UefiBootManagerLib, and no longer by IntelFrameworkModulePkg's
GenericBdsLib.
This patch parallels OvmfPkg commit 2b23b8d45b.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Jiahui Cen via groups.io
Sami Mujawar
Ard Biesheuvel
Laszlo Ersek
Ard Biesheuvel
Leif Lindholm
Pete Batard
Anthony PERARD
Zhichao Gao
Michael D Kinney
Antoine Coeur
Ruiyu Ni
chenc2
Star Zeng
Dennis Chen
Evan Lloyd