The following flash-related base addresses:
- PcdFlashNvStorageVariableBase64,
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase,
are always set to constant (invariable) values in the "-D SMM_REQUIRE"
build of OVMF. (That's because in the SMM build, actual pflash is a hard
requirement, and the RAM-based emulation is never available.)
Set said PCDs statically, at build. This will allow us to depend on their
values in the PEI phase.
When SMM_REQUIRE is FALSE, this change has no effect (confirmed by report
file comparison).
When SMM_REQUIRE is TRUE, the report file shows the following changes:
- "PcdOvmfFlashNvStorageFtwSpareBase" and
"PcdOvmfFlashNvStorageFtwWorkingBase" are no longer consumed by any
module directly,
- for "PcdFlashNvStorageFtwSpareBase", "PcdFlashNvStorageFtwWorkingBase"
and "PcdFlashNvStorageVariableBase64", the access method changes from
DYN to FIXED,
- for the latter PCDs, the zero (dynamic default) values are replaced with
the desired constants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-4-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
The only two OvmfPkg references to "PcdFlashNvStorageVariableBase" are the
spurious ones in the runtime DXE driver and the SMM driver INF files of
the QEMU flash driver. Remove these references.
The flash driver does not access "PcdOvmfFlashNvStorageEventLogBase"
either, so remove that from the INF files too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-2-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Fix various typos in comments and documentation.
When "VbeShim.asm" is modified, we have to re-run "VbeShim.sh"
to update "VbeShim.h".
The string modified by this patch is only used when the DEBUG
macro (at the top of the file) is commented out. Since the
string is not referenced, NASM eliminates it, resulting in
the same byte array content in "VbeShim.h".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-58-philmd@redhat.com>
Among other things, the header file declares functions that are called
from the FVB protocol member functions in "FwBlockService.c", and defined
in "QemuFlash.c".
Both C files are listed in both "FvbServicesSmm.inf" and
"FvbServicesRuntimeDxe.inf", thus add the header file to both INF files as
well.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL member functions that are defined in
"FwBlockService.c". This way "mFvbDeviceTemplate.FwVolBlockInstance" can
be initialized near the top of "FwBlockService.c", ahead of the member
function definitions.
"FwBlockService.c" is linked into both the DXE_SMM_DRIVER and the
DXE_RUNTIME_DRIVER builds of this module, thus list the header file in
both INF files.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit:24e4ad7 (OvmfPkg: Add AmdSevDxe driver) added a driver which runs
early in DXE phase and clears the C-bit from NonExistent entry -- which
is later split and accommodate the flash MMIO. When SMM is enabled, we
build two sets of page tables; first page table is used when executing
code in non SMM mode (SMM-less-pgtable) and second page table is used
when we are executing code in SMM mode (SMM-pgtable).
During boot time, AmdSevDxe driver clears the C-bit from the
SMM-less-pgtable. But when SMM is enabled, Qemu Flash services are used
from SMM mode.
In this patch we explicitly clear the C-bit from Qemu flash MMIO range
before we probe the flash. When OVMF is built with SMM_REQUIRE then
call to initialize the flash services happen after the SMM-pgtable is
created and processor has served the first SMI. At this time we will
have access to the SMM-pgtable.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: trivial coding style improvements]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When the user requires "security" by passing -D SMM_REQUIRE, and
consequently by setting PcdSmmSmramRequire, enforce flash-based variables.
Furthermore, add two ASSERT()s to catch if the wrong module were pulled
into the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19063 6f19259b-4bc3-4df7-8a09-765794883524