TimerLib had to be resolved in commit 5ab97a64b5 ("ShellPkg/bcfg: Add
Shell Spec 2.2 modification functionality", 2017-03-01) because:
- the BCFG command started making calls to UefiBootManagerLib
(EfiBootManagerVariableToLoadOption(),
EfiBootManagerLoadOptionToVariable(), EfiBootManagerFreeLoadOption()),
- and "MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf"
depended on TimerLib.
Because TimerLib is platform-specific, but "ShellPkg/ShellPkg.dsc" is
meant to produce a UEFI shell binary that is platform-independent (see
"ShellBinPkg/ReadMe.txt"), we resolved TimerLib to
"BaseTimerLibNullTemplate.inf". (TimerLib functionality was never actually
needed on UefiBootManagerLib code paths that were exercised by the shell /
BCFG.)
Thanks to the last patch, UefiBootManagerLib no longer depends on
TimerLib, thus we can drop the TimerLib resolution entirely.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Shell core was enhanced to find the manual string in PE resource
section. But the finding algorithm is too strict: If the manual is
written beginning with:
.TH command 0 "descripton of command"
but user types "COMMAND.efi -?". The finding algorithm uses
case-sensitive compare between "command" and "COMMAND" resulting
in the manual cannot be found.
The patch fixes this issue by using existing ManFileFindTitleSection
and ManFileFindSections which compare command case-insensitive.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Make the error message clearer if fail to get ACPI/FPDT table.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
An ordinary empty directory should contain "." and ".." entries.
When an empty directory even doesn't contain "." or ".." entry,
FileHandleFindFirstFile() may return error status and a NULL
FileInfo.
IsDirectoryEmpty() implementation in Rm.c doesn't consider this
case and the deference of FileInfo->FileName causes page fault
exception because FileInfo is NULL.
The patch checks the return status of FileHandleFindFirstFile()
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
"Compress.h" declares the Compress() function as EFIAPI, but the
definition in "Compress.c" lacks EFIAPI.
GCC toolchains without LTO do not catch this error because "Compress.c"
does not include "Compress.h"; i.e. the declaration used by callers such
as "EfiCompress.c" is not actually matched against the function definition
at build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file. Finally, remove EFIAPI from both declaration and
definition -- this was the original intent of commit c4e74e9b81
("ShellPkg/UefiShellDebug1CommandsLib: Remove unnecessary EFIAPI",
2016-10-09), but it missed the header file.
(Gary meant to address that omission in Oct 2017:
[edk2] [PATCH] ShellPkg/UefiShellDebug1CommandsLib: Remove EFIAPI from
Compress()
http://mid.mail-archive.com/20171026065329.32311-1-glin@suse.com
and Ray reviewed the patch, but then the patch was never committed.)
So do the sync and drop EFIAPI now.
This happens to fix the EFICOMPRESS shell command, when built with GCC for
X64.
Cc: Gary Lin <glin@suse.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: c4e74e9b81
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The below code reads additional one CHAR16 when copying
content from Specific to NewSpecific.
NewSpecific = AllocateCopyPool(
StrSize(Specific) + sizeof(CHAR16), Specific
);
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
When "FOR %a %a IN A B C" is executed,
CurrentScriptFile->CurrentCommand->Data is NULL.
But the code assumes it's not NULL and tries to
deference it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Original code locates the first UnicodeCollation instance in
DXE Core protocol database.
It's not correct considering multiple UnicodeCollation instances
exist in system.
The patch changes logic to find the one that matches the current
system language.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com.
In the for-loop condition of original code, the expression
*CurrentCommand != CHAR_NULL
is put before expression
CurrentCommand < SortedCommandList + SortedCommandListSize/sizeof(CHAR16)
When CurrentCommand walks to the end of string buffer, one more character
over the end of string buffer will be read and then stop.
To fix this issue, just move the last expression to the first one. Because
of short-circuit evaludation of and-expression, the following one
*CurrentCommand != CHAR_NULL
will not be evaluated if the expression before it is evaludated as FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
UefiShellLevel2CommandsLib (somewhat questionably) calls the
BaseLib-internal function InternalCharToUpper().
This function is declared in "MdePkg/Library/BaseLib/BaseLibInternals.h",
which is not a public library class header. UefiShellLevel2CommandsLib
therefore duplicates the function declaration, but a mistake was made: the
EFIAPI calling convention is not spelled out on the duplicated
declaration. Therefore calls made from UefiShellLevel2CommandsLib will not
match the actual function definition in "MdePkg/Library/BaseLib/String.c",
when GCC/X64 toolchains are used.
One consequence of this is that cross-filesystem copies don't work in the
UEFI shell (see the StrniCmp() function in
"UefiShellLevel2CommandsLib.c"). From the original report:
> FS0:\efi\ubuntu\> cp grubx64.efi fs1:\
>
> cp: The source and destination are the same.
Copy the declaration from "BaseLibInternals.h" to
"UefiShellLevel2CommandsLib.c" verbatim.
Reported-by: Rebecca Cran <rebecca@bluestop.org>
Analyzed-by: Thomas Palmer <thomas.palmer@hpe.com>
Analyzed-by: Liming Gao <liming.gao@intel.com>
Ref: http://mid.mail-archive.com/47cd17d8-f022-6ca5-2f52-06a8250f8d14@cran.org.uk
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Rebecca Cran <rebecca@bluestop.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Thomas Palmer <thomas.palmer@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Last check in involved a build error, this patch is to
fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in ShellPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
When Dynamic command drivers links to ShellLib, the ShellLib
constructor shouldn't be called because the Shell and ShellParameters
protocols don't exist when the driver starts.
So it's required to set PcdShellLibAutoInitialize to FALSE for
dynamic command drivers.
Update the comments in DEC file to describe such requirement
for this PCD.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When dynamic command drivers are built into FV and start during
boot, they fails. Because Shell protocol doesn't exist during boot.
The patch sets Shell protocol and also set PcdShellLibAutoInitialize
to FALSE to ensure that
1. Shell protocol check doesn't happen in driver's entry point.
2. Driver can get the Shell protocol in DynamicCommand.Handler().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The previous change in ShellLib: "commit
3d29f8c5e3
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current implementation resets the CTRL-C event early when printing
the shell prompt, when user types "<CTRL-C>ls<ENTER>", "ls" command
is terminated immediately when starts.
It's not an expected behavior from users' perspective.
Correct way is to reset the CTRL-C event just before running the
command, which is a bit later than current point.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So dp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
DpApp.inf is to provide a standalone application.
DpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
UEFI Shell spec defines Shell Dynamic Command protocol which is just
for the purpose to extend internal command.
So tftp command is changed from NULL class library to be a driver
producing DynamicCommand protocol.
The guideline is:
1. Only use NULL class library for Shell spec defined commands.
2. New commands can be provided as not only a standalone application
but also a dynamic command. So it can be used either as an
internal command, but also as a standalone application.
TftpApp.inf is to provide a standalone application.
TftpDynamicCommand.inf is to provide a standalone driver producing
Dynamic Command protocol.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=779
For the API EfiShellOpenRootByHandle():
The return status of the call to SimpleFileSystem->OpenVolume should be
checked.
It is possible that there is a media change in the device (like CD/DVD
ROM). In such case, the volume root opened and/or the device path opened
previously (also within EfiShellOpenRootByHandle) may be invalid.
This commit adds a check for the result of OpenVolume before subsequently
calling functions like EfiShellGetMapFromDevicePath() &
ConvertEfiFileProtocolToShellHandle().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code uses PciRootBridgeIo for memory access.
It worked before MdeModulePkg/PciHostBridgeDxe driver was checked in.
But MdeModulePkg/PciHostBridgeDxe adds checks to ensure the MMIO
access request is in the scope of the current RootBridgeIo instance.
It causes "hexeditor -m 0 2" reports error because memory address 0
surely is not in the scope of any RootBridgeIo instance.
In fact only accessing the MMIO space occupied by the RootBridgeIo
can work.
The patch changes hexeditor to use CpuIo for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code as below intend to set the character
before last column to CHAR_NULL.
Line[(LastCol % (ARRAY_SIZE (Line) - 1)) - 1] = CHAR_NULL;
But when LastCol % (ARRAY_SIZE (Line) - 1)) equals to 0,
Line[-1] is modified.
We should change to code as below:
Line[(LastCol - 1) % (ARRAY_SIZE (Line) - 1)] = CHAR_NULL;
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Issue :
When storage media is full, tftp was resulting in ASSERT
MdeModulePkg/Core/Dxe/Mem/Page.c, because number of pages
was zero.
Reason:
While doing tftp, function call ShellWriteFile was modifying
FileSize variable. In case of full disk it was coming out to be
Zero.
Fix:
Storage the original filesize in local variable, and use this
variable while freeing the pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
EditorClearLine() assumes the console max column is less than 200.
When the max column is bigger than 200, the code incorrectly
modifies the content out side of Line buffer.
It may cause system hang or reset.
The patch changes the function to print several times when
the max column is bigger than 200.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Existing logic to parse the flags isn't complete and cannot detect
some invalid combinations of flags.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Some developers/QAs complain the color of directory or executable
files is hard to see and suggest to use a more bright color.
I agree with this suggestion so make this patch.
The look and feel is much better now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Issue : We were setting MediaPresent as TRUE (default) and
not checking return status of NetLibDetectMedia().
NetLibDetectMedia() sets MediaPresent FLAG in case of success
only and dont change flag on error.
So, Media State will display as 'Media Present', in case of
error also.
Fix : Check return value of NetLibDetectMedia(), if error then
print "Media State Unknown"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Correct the help message to match that defined in Shell spec.
In 'DISCONNECT -r [-nc]' case, '-r' is not optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Help message of "dh" gives an example to display all handles
with "Image" protocol but actually "LoadedImage" protocol should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=655
V2 change:
Put some strings into the UNI file for localization.
The dump information will include:
a. The type of the partition (Mbr, Gpt or Other);
b. Whether the partition is an EFI System Partition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The current implementation has a typo that maps SmmPciRootBridgeIo
to "PciRootBridgeIo".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch doesn't change any real functionality.
Only the indent width and EOL are changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The blue text is very hard to see.
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
> ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c:525:66: error:
> passing argument 2 of 'gEfiShellProtocol->GetGuidName' from incompatible
> pointer type [-Werror=incompatible-pointer-types]
>
> Status = gEfiShellProtocol->GetGuidName(&FoundVarGuid, &GuidName);
> ^
> ShellPkg/Library/UefiShellDebug1CommandsLib/DmpStore.c:525:66: note:
> expected 'const CHAR16 ** {aka const short unsigned int **}' but
> argument is of type 'CHAR16 ** {aka short unsigned int **}'
Pointer-to-(pointer-to-CHAR16) and pointer-to-(pointer-to-const-CHAR16)
are incompatible types; GCC and CLANG are right to complain.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Jenkins Build Host <jenkins@kraxel.org>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=716
Fixes: 09e8678380
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Change "dmpstore" to show name of known variable vendor GUID.
The name is got from ShellProtocol.GetGuidName().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=690
Within function EfiShellGetDevicePathFromFilePath(), when the input
parameter 'Path' string is like:
"FS0:"
It is possible for the below statement:
"if (*(Path+StrLen(MapName)+1) == CHAR_NULL) {"
to read the content 1 byte beyond the string boundary (both 'Path' and
'MapName' will be FS0: in this case).
This commit adds additional checks to avoid this.
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If DAD failed, we print "It failed to set", print the IPv6
address and exit. We need a better error string
and also, after printing the IPv6 address, we need a new line
else the Shell> prompt will overwrite the IPv6 address. Fixed
these issues in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Some commands may cause current directory or even current mapping
become invalid. For example, "MAP" after unplugging the USB thumb
key may cause current mapping "FS0:" disappear.
This patch updates the CWD and current mapping when commands return.
It also causes the command prompt change to default "Shell>".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
When "map -r" runs, the mapping list is re-created but
gShellCurMapping still points to the old mapping list which
is already destroyed.
The patch updates the gShellCurMapping to point to the correct
location in the new mapping list.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
Init CustomCumulativeData.MinDur to PERF_MAXDUR, otherwise the
MinDur displayed for custom cumulative data will be always 0,
but not the real shortest duration.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Cinnamon Shia <cinnamon.shia@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch shows "X"/"-" instead of "Y"/"N" in column "CFG"
and "DIAG".
The patch shows "-" instead of "0" in column "#D" and "#C".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=642
Add top level License.txt file with the BSD 2-Clause
License that is used by the majority of the EKD II open
source project content. Merge copyright statements
from the BSD 2-Clause License files in each package
directory and remove the duplication License.txt
file from package directories.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PathSize is the number of bytes in PathForReturn buffer so
PathForReturn[PathSize - 1] incorrectly accesses the last
character in the buffer,
PathForReturn[PathSize / sizeof (CHAR16) - 1] should be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
MAX_FILE_NAME_LEN and FIND_XXXXX_FILE_BUFFER_SIZE are not used
by ShellLib so remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch adds logic to probe the media change for physical
block devices. So that when media change happens, the BlockIo
is re-installed again.
It fixes the issue when CDROM is removed UEFI Shell still shows
the BlockIo in the output of "map -r".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
dh command gets driver name and wrongly prints it as 'Child [handle]'.
It should print it as 'Driver Name [handle]'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current code will allocate pool to hold the null char for name buffer
when PrevName==NULL, but the NameSize is still 0.
For this case, GetNextVariableName will return EFI_INVALID_PARAMETER
to follow UEFI 2.7 spec.
UEFI 2.7 spec:
The VariableNameSize must not be smaller the size of the variable
name string passed to GetNextVariableName() on input in the
VariableName buffer.
EFI_INVALID_PARAMETER
Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to make NameSize to be consistent with name buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Found few instances where IPv4 and DHCPv4 spelled incorrectly
as IP4 and DHCP4 respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
STR_GEN_ERR_NOT_FOUND is added and currently is only
used by alias command. This string template can be used
by other commands as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Couple of instances had IP4 mentioned, instead of IPv4.
Changing all to IPv4 to maintain consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The Readme.txt contains instructions about how to integrate Shell
into Nt32. Actually Nt32 already contains a macro USE_OLD_SHELL to
choose OLD or NEW Shell.
So remove this txt file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code expects the Unicode stream from pipe doesn't
contains the Unicode BOM.
But that's not true.
Commit [9ed21946c7] changes
CreateFileInterfaceMem() to add the BOM for Unicode stream.
When parse pipe support was firstly added, a private implementation
ParseReturnStdInLine() was created to specially handle
the Unicode stream without BOM. Since now the Unicode steam contains
BOM, the private implementation can be removed and
ShellFileHandleReturnLine() can be used directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
alias in UEFI Shell is case insensitive.
Old code saves the alias to variable storage without
converting the alias to lower-case, which results
upper case alias setting doesn't work.
The patch converts the alias to lower case before saving
to variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=566
In function InternalShellPrintWorker(), if the string in variable
'mPostReplaceFormat2' starts with character L'%', the following
expression:
*(ResumeLocation-1) == L'^' at line 2831
will read an undefined value before the starting of string
'mPostReplaceFormat2'.
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch dumps memory map information for all memory types.
But to follow the SFO format of "memmap" defined in Shell 2.2 spec,
the patch doesn't dump the memory map information for OEM/OS
memory types. But it does include the OEM/OS memory in the total
size in SFO format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch changes Buffer to Descriptors, changes
(UINT8 *Walker) to (EFI_MEMORY_DESCRIPTOR *Walker).
The change makes lots of type conversion unnecessary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch adds support for showing the file name associated with a
LoadedImageProtocol file path. This is a behavior that was present in
the old shell but has been lost in the new shell.
For example, using 'dh -v' in the old shell:
Handle D3 (3A552218)
Image (3A54C918) File:MicrocodeUpdate
ParentHandle..: 3A666398
vs. the new shell:
D3: 3A552218
LoadedImage
Revision......: 0x00001000
ParentHandle..: 3A666398
Here's what the output of 'dh -v' looks like after this patch:
D3: 3A552218
LoadedImage
Name..........: MicrocodeUpdate
Revision......: 0x00001000
ParentHandle..: 3A666398
This seems like useful information for the shell to display.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch changes the order of operations to make sure we can open the
LoadedImageProtocol before getting the format string. This should not
affect functionality, and makes the next patch easier to review.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch adds support for displaying a text representation of the file
path associated with a LoadedImageProtocol. This is a behavior that was
present in the old shell but has been lost in the new shell.
For example, using 'dh -v' in the old shell:
FilePath......: FvFile(F3331DE6-4A55-44E4-B767-7453F7A1A021)
FilePath......: \EFI\BOOT\BOOTX64.EFI
vs. the new shell:
FilePath......: 3A539018
FilePath......: 3A728718
This seems like useful information for the shell to display.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Laszlo Ersek
Ruiyu Ni
Dandan Bi
Jian J Wang
fanwang2
Fu Siyuan
Hao Wu
Song, BinX
Meenakshi Aggarwal
Huajing Li
Liming Gao
hegdenag
Star Zeng
Michael D Kinney
Tapan Shah
Jeff Westfahl