https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update PCD driver to retrieve the default setting and set the initial
EFI variable when PcdSetNvStoreDefaultId is set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update HiiDataBase to retrieve the default setting and patch IFR data
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PEI may report the normal format variable storage HOB for the default
EFI variable. VariableDxe needs to support it and set them into NV variable
region.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch fixes a bug in Ip4ConfigProtocol, that new created IP interface is
not freed if Open ARP protocol failed.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Instance->Dhcp4Event is not necessary to be created in Ip4Config2InitInstance.
Because it will created in Ip4StartAutoConfig() later.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in MdeModulePkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
This patch updates the IP4 driver to use error status code instead of ASSERT
if failed to allocate memory buffer.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to resolve the issue reported @
https://bugzilla.tianocore.org/show_bug.cgi?id=804.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to discard the normal ICMP packets and recycle the received
ICMP data to avoid the memory leak.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When UEFI receives ICMP echo packets it will enter Ip4IcmpReplyEcho
function, and then call Ip4Output. However, if Ip4Output gets some
error and exits early, e.g. fails to find the route entry, memory
buffer of "Data" gets no chance to be freed and memory leak will be
caused. If there is such an attacker in the network, we will see UEFI
runs out of memory and system hangs.
So we explicitly free the memory when error status is returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Junbiao Hong <hongjunbiao@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In CheckRemainingSpaceForConsistencyInternal, one of the return paths leaves a loose
VA_COPY with no matching VA_END.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Sort and merge memory resource entries to handle the case that
the memory resource HOBs are reported differently between
BOOT_ON_FLASH_UPDATE boot mode and normal boot mode, and the
capsule buffer from UpdateCapsule at normal boot sits across
two memory resource descriptors at BOOT_ON_FLASH_UPDATE boot mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Tested-by: Dakota Chiang <dakota.chiang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=761
When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters. The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.
The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.
GEOMETRICSHAPE_UP_TRIANGLE '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE '>'
GEOMETRICSHAPE_DOWN_TRIANGLE 'v'
GEOMETRICSHAPE_LEFT_TRIANGLE '<'
ARROW_UP '^'
ARROW_DOWN 'v'
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".
Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
=> Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
=> Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
=> No more character so SerialPortPoll() will return FALSE and loop
until timeout
=> Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed
After some investigation, I found it is related to the Timeout value.
The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
2 * 1000000 / (UINTN) Mode->BaudRate;
}
For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8 + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).
When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
SerialIo->SetAttributes() ->
SerialSetAttributes() ->
SerialPortSetAttributes()
Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.
SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.
And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
According the UEFI spec 2.7 A:
In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
the default IPv4 address if it is not available yet."
In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these configurations
are retrieved from DHCP server or other auto-configuration mechanism."
This patch is to align with the above description. When the default IPv4
address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
Ip4Config2 protocol will be called to retrieve the default address by setting
the policy to Ip4Config2PolicyDhcp.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
VariableRuntimeDxe deletes and locks the MorLock variable in
MorLockInit(), with the argument that any protection provided by MorLock
can be circumvented if MorLock can be overwritten by unprivileged code
(i.e., outside of SMM).
Extend the argument and the logic to the MOR variable, which is supposed
to be protected by MorLock. Pass Attributes=0 when deleting MorLock and
MOR both.
This change was suggested by Star; it is inspired by earlier VariableSmm
commit fda8f631ed ("MdeModulePkg/Variable/RuntimeDxe: delete and lock
OS-created MOR variable", 2017-10-03).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to the TCG Platform Reset Attack Mitigation Specification (May
15, 2008):
> 5 Interface for UEFI
> 5.1 UEFI Variable
> 5.1.1 The MemoryOverwriteRequestControl
>
> Start of informative comment:
>
> [...] The OS loader should not create the variable. Rather, the firmware
> is required to create it and must support the semantics described here.
>
> End of informative comment.
However, some OS kernels create the MOR variable even if the platform
firmware does not support it (see one Bugzilla reference below). This OS
issue breaks the logic added in the last patch.
Strengthen the MOR check by searching for the TCG or TCG2 protocols, as
edk2's implementation of MOR depends on (one of) those protocols.
The protocols are defined under MdePkg, thus there's no inter-package
dependency issue. In addition, calling UEFI services in
MorLockInitAtEndOfDxe() is safe, due to the following order of events /
actions:
- platform BDS signals the EndOfDxe event group,
- the SMM core installs the SmmEndOfDxe protocol,
- MorLockInitAtEndOfDxe() is invoked, and it calls UEFI services,
- some time later, platform BDS installs the DxeSmmReadyToLock protocol,
- SMM / SMRAM is locked down and UEFI services become unavailable to SMM
drivers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1498159
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The "MemoryOverwriteRequestControl" (a.k.a. MOR) variable comes from the
"TCG Platform Reset Attack Mitigation Specification":
https://www.trustedcomputinggroup.org/wp-content/uploads/Platform-Reset-Attack-Mitigation-Specification.pdf
The "MemoryOverwriteRequestControlLock" variable (a.k.a. MORL) is a
Microsoft extension, called "Secure MOR implementation":
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/device-guard-requirements
Currently the VariableSmm driver creates MORL without regard to MOR. This
can lead to a situation where a platform does not support MOR from the
prerequisite spec (because it does not include the
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf" driver), but appears
to support MORL from the dependent Microsoft spec.
"winload.efi" notices this inconsistency, and disables the Device Guard
Virtualization Based Security in Windows Server 2016 and Windows 10 64-bit
Enterprise.
If the platform includes
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf", then MOR will exist
by the time EndOfDxe is reached, and VariableSmm can safely create MORL.
Otherwise, do not create MORL (delete it if it exists), and also prevent
other modules from creating it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=727
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1496170
Reported-by: Ladi Prosek <lprosek@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The SetMorLockVariable() function sets "mMorLockPassThru" to TRUE
temporarily, so that it can set the MOR Control Lock variable to
well-formed values without permission checks.
In the next patch, we'll need the same override for deleting the MOR
Control Lock variable; hence obey "mMorLockPassThru" in the deletion
branch of SetVariableCheckHandlerMorLock() as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Introduce the MorLockInitAtEndOfDxe() hook, in order to allow
MorLockInit() to delay / queue operations until EndOfDxe. (Or, if the
platform never signals EndOfDxe, until ReadyToBoot.)
Call MorLockInitAtEndOfDxe() whenever we set "mEndOfDxe" to TRUE:
- in VariableRuntimeDxe:
- in the OnReadyToBoot() function,
- in the OnEndOfDxe() function;
- in VariableSmm:
- on the SMM_VARIABLE_FUNCTION_READY_TO_BOOT SMI request,
- in the SmmEndOfDxeCallback() function.
For now, implement MorLockInitAtEndOfDxe() as a no-op in both
VariableRuntimeDxe and VariableSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The MorLockInit() and SetVariableCheckHandlerMor() functions have separate
implementations for VariableRuntimeDxe (= unprivileged, unified
DXE_RUNTIME driver) and VariableSmm (= privileged, DXE_SMM back-end of the
split variable driver).
Move their declarations from "Variable.c" to "PrivilegePolymorphic.h", so
that the compiler enforce that the declarations and the definitions match.
(All C source files with the call sites and the function definitions
already include "PrivilegePolymorphic.h" via "Variable.h".)
At the same time:
- replace two typos in the MorLockInit() description:
- replace "EFI_SUCEESS" with "EFI_SUCCESS",
- replace "MOR Lock Control" with "MOR Control Lock";
- in the SetVariableCheckHandlerMor() description:
- replace @param with @param[in],
- correct the description of the Attributes parameter (suggested by Star
Zeng <star.zeng@intel.com>),
- rewrap the comment to 80 columns.
This change cleans up commit 2f6aa774fe ("MdeModulePkg: Add MorLock to
variable driver.", 2016-01-19).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
If the platform supports SMM, a gRT->SetVariable() call at boot time
results in the following call tree to SecureBootHook():
RuntimeServiceSetVariable() [VariableSmmRuntimeDxe.c, unprivileged]
SmmVariableHandler() [VariableSmm.c, PRIVILEGED]
VariableServiceSetVariable() [Variable.c, PRIVILEGED]
SecureBootHook() [VariableSmm.c, PRIVILEGED]
//
// do nothing
//
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
And if the platform does not support SMM:
VariableServiceSetVariable() [Variable.c, unprivileged]
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
In other words, the measurement always happens outside of SMM.
Because there are two implementations of the SecureBootHook() API, one
that is called from SMM and does nothing, and another that is called
outside of SMM and measures variables, the function declaration should be
in a header file. This way the compiler can enforce that the function
declaration and all function definitions match.
"Variable.h" is used for "including common header files, defining internal
structures and functions used by Variable modules". Technically, we could
declare SecureBootHook() in "Variable.h". However, "Measurement.c" and
"VariableSmmRuntimeDxe.c" themselves do not include "Variable.h", and that
is likely intentional -- "Variable.h" exposes so much of the privileged
variable implementation that it is likely excluded from these C source
files on purpose.
Therefore introduce a new header file called "PrivilegePolymorphic.h".
"Variable.h" includes this header (so that all C source files that have
been allowed to see the variable internals learn about the new
SecureBootHook() declaration immediately). In "Measurement.c" and
"VariableSmmRuntimeDxe.c", include *only* the new header.
This change cleans up commit fa0737a839 ("MdeModulePkg Variable: Merge
from Auth Variable driver in SecurityPkg", 2015-07-01).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
EFI_BOOT_SCRIPT_WRITE() interface is a var-arg interface.
Spec defines the order of parameters for
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE as below:
typedef
EFI_STATUS
(EFIAPI *EFI_BOOT_SCRIPT_WRITE) (
IN CONST EFI_S3_SAVE_STATE_PROTOCOL *This,
IN UINT16 OpCode,
IN EFI_BOOT_SCRIPT_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
But implementation assumes Segment is in the very end, after Buffer.
Similar spec/implementation gaps are also found for
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE.
The patch fixes the implementation to extract the arguments in
correct order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.
The patch defers the deletion of "BootNext" to before booting it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Within function GetAllocationDescriptorLsn():
The call to GetPdFromLongAd() may return NULL and it will be later
dereferenced in GetShortAdLsn().
This commit adds ASSERT to resolve the potential NULL pointer
dereference.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Do not reserve entire block device size for an UDF file system -
instead, reserve the appropriate space (UDF logical volume space) for
it.
Additionally, only create a logical partition for UDF logical volumes
that are currently supported by EDK2 UDF file system implementation. For
instance, an UDF volume with a single LVD and a single Physical (Type 1)
Partition will be supported.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add NULL pointer check before using a pointer to avoid possible
NULL pointer dereference.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
For oneof/numeric/CheckBox(storage can be Bit VarStore)
If the question value can be updated and shown correctly
in UI page, we need do enhancements in following cases:
1. Parse the Ifr data to get the bit VarStore info correctly.
2. Set/get value to/from bit VarStore correctly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
For oneof/numeric/checkbox, their storage may be bit field.
When generating <ConfigAltResp> string to get default value
for these questions, we need to parse the Ifr data to get
the bit Varstore info,and then generating the correct
<ConfigAltResp> string.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Similar to the naming style for variables, it's better for the name of
members in a enum type to avoid using only upper-case letters.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The local GUID variable 'UdfDevPathGuid', it has been initialized during
its declaration.
For better coding style, this commit uses a global variable instead.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In ResolveSymlink(), replace the following variable:
CHAR16 *C;
with:
CHAR16 *Char;
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Case 1 - Within DuplicateFid() & DuplicateFe():
The call to AllocateCopyPool() may return NULL.
Add ASSERTs as checks.
Case 2 - Within UdfRead():
Add ASSERT to ensure 'NewFileEntryData' returned from FindFileEntry()
will not be NULL pointer.
Case 3 - Within GetAllocationDescriptorLsn():
The return value of 'GetPdFromLongAd (Volume, ParentIcb)' may be NULL,
and it will be passed into function GetShortAdLsn() which will
dereference it.
Add ASSERT in GetShortAdLsn() as check.
Case 4 - Within ReadFile():
Add ASSERT to ensure 'Data' returned from GetAedAdsData() will not be NULL
pointer.
Case 5 - Within InternalFindFile():
If both 'Parent->FileIdentifierDesc' and 'Icb' are NULL, then possible
NULL pointer dereference will happen in ReadDirectoryEntry().
Add additional check to resolve.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Issue : When try to change serial attributes using sermode
command, the default values are set with the execute flow
as below.
The sermode command calls SerialSetAttributes, which sets H/W
attributes of Serial device. After that the SerialIo protocol is
reinstalled, which causes MdeModulePkg/Universal/Console/TerminalDxe
and MdeModulePkg/Universal/Console/ConPlatformDxe drivers' bindings
to stop and then start. This in turn calls SerialReset, which undoes
changes of SerialSetAttributes.
Cause : The SerialReset command resets the attributes' values
to default.
Fix : Serial Reset command should set the attributes which have
been changed by user after calling SerialSetAttributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The generic driver has no way to know whether an OEM type should
be filtered or not.
This patch is to update the code to skip measurement for OEM type
and platform code can measure it by self if required.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=704
For root directory, the FID (File Identifier Descriptor) pointer is
accessible through PRIVATE_UDF_FILE_DATA.Root, whereas non-root
directory and regular files, their FIDs are accessible through
PRIVATE_UDF_FILE_DATA.File.
In UdfSetPosition(), the FID was retrieved through
PRIVATE_UDF_FILE_DATA.File, hence when calling it with a root directory,
PRIVATE_UDF_FILE_DATA.File.FileIdentifierDescriptor would be NULL and
then dereferenced.
This patch fixes the NULL pointer dereference by calling _FILE() to
transparently return the correct UDF_FILE_INFO * which points to a valid
FID descriptor of a specific file.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
VS2010/VS2012 build failure with below info:
warning C4701:
potentially uninitialized local variable 'DataOffset' used
potentially uninitialized local variable 'FilePosition' used
potentially uninitialized local variable 'FinishedSeeking' used
potentially uninitialized local variable 'Data' used
warning C4703:
potentially uninitialized local pointer variable 'Data' used
In fact, DataOffset, FilePosition and FinishedSeeking are initialized
and then used if (ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ).
DoFreeAed will be set to TRUE when Data is allocated and returned from
GetAedAdsData(), and Data will be freed if (DoFreeAed) when exiting.
Use same method at 5afa5b8159 to fix
the build failure.
There is related discussion at
https://lists.01.org/pipermail/edk2-devel/2017-September/014641.html
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
When building the driver for DEBUG/RELEASE, GCC48/GCC49 warn about
ReadFile() possibly using "BytesLeft" without initializing it first.
This is not the case. The reads of "BytesLeft" are only reachable if
(ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ). But, in that case, we
also set "BytesLeft" to "ReadFileInfo->FileDataSize", near the top of the
function.
Assign "BytesLeft" zero at the top, and add a comment that conforms to the
pending Coding Style Spec feature request at
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
This issue was reported by Ard's and Gerd's CI systems independently.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
The ECMA-167 standard (3rd Edition, June 1997) reserves values 4 through 7
in the ICB.Flags[2:0] bit-field for future standardization; see "14.6 ICB
Tag" / "14.6.8 Flags (RBP 18)".
https://www.ecma-international.org/publications/standards/Ecma-167.htm
The
switch (RecordingFlags)
statement in the ReadFile() function handles all the standard values,
using the constants of the UDF_FE_RECORDING_FLAGS enum type. However, the
reserved values are not caught with a "default" case label, which both
breaks the edk2 Coding Style Spec, and leaves the Status variable
un-initialized, before we return Status under the Done label.
Set Status to EFI_UNSUPPORTED if we encounter a reserved value.
This issue was reported by Ard's and Gerd's CI systems independently
(through build failures with GCC48/GCC49, DEBUG/RELEASE targets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
This patch gets rid of a negative comparison of an UINT64 type (Offset)
as it'll never evaluate to true.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In the expression
(RemainderByMediaBlockSize != 0 ||
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE)
the second expression is only evaluated if the first expression is false.
If the first expression is false, i.e.,
RemainderByMediaBlockSize == 0
then UDF_LOGICAL_SECTOR_SIZE is a whole multiple of "Media->BlockSize",
which implies
UDF_LOGICAL_SECTOR_SIZE >= Media->BlockSize.
Therefore whenever
Media->BlockSize > UDF_LOGICAL_SECTOR_SIZE
is evaluated, it is false.
The expression
((expression) || FALSE)
is equivalent to
(expression).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, the division and shifting of 64-bit values are forbidden with
C-language operators, because the compiler may generate intrinsic calls
for them.
For example, clang-3.8 emits a call to "__umoddi3" for
UDF_LOGICAL_SECTOR_SIZE % Media->BlockSize
in PartitionInstallUdfChildHandles(), if PartitionDxe is built for IA32,
which then fails to link.
UDF_LOGICAL_SECTOR_SIZE has type UINT64, while
EFI_BLOCK_IO_MEDIA.BlockSize has type UINT32(). Replace the % operator
with a DivU64x32Remainder() call.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In edk2, initialization of local variables is forbidden, both for
stylistic reasons and because such initialization may generate calls to
compiler intrinsics.
For the following initialization in UdfRead():
CHAR16 FileName[UDF_FILENAME_LENGTH] = { 0 };
clang-3.8 generates a memset() call, when building UdfDxe for IA32, which
then fails to link.
Replace the initialization with ZeroMem().
Do the same to "FilePath" in UdfOpen().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ard reports that clang-3.8 correctly flags the following issue in the
ReadFile() function:
If "RecordingFlags" is INLINE_DATA, then there are three paths through the
code where we mean to return success, but forget to set Status
accordingly:
(1) when "ReadFileInfo->Flags" is READ_FILE_GET_FILESIZE, or
(2) when "ReadFileInfo->Flags" is READ_FILE_ALLOCATE_AND_READ and
AllocatePool() succeeds, or
(3) when "ReadFileInfo->Flags" is READ_FILE_SEEK_AND_READ.
Set "Status" to EFI_SUCCESS when we are done processing the INLINE_DATA
request, i.e., when we reach the corresponding "break" statament under the
INLINE_DATA case label.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the ReadFile() function, if "RecordingFlags" is INLINE_DATA, then we
cover the following values of "ReadFileInfo->Flags":
- READ_FILE_GET_FILESIZE
- READ_FILE_ALLOCATE_AND_READ
- READ_FILE_SEEK_AND_READ
We don't do anything (just proceed to the end of the function) if
"ReadFileInfo->Flags" is anything else.
In reality the above three values cover the domain of the
UDF_READ_FILE_FLAGS enum type fully, and "ReadFileInfo->Flags" is only
ever set internally to UdfDxe. Therefore any other flag value would be a
bug in UdfDxe.
ASSERT() specifically that "ReadFileInfo->Flags" has been set correctly,
so that the reader is not left wondering what happens if none of the enum
constants match.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Initialize the array DescriptorLBAs[] after declaration to fix
non-constant aggregate initializer warning in VS tool chains.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V3: Remove one unnecessay type cast in patch 1.
Codes:
if (FilePosition + ExtentLength > ReadFileInfo->FilePosition) {
Offset = ReadFileInfo->FilePosition - FilePosition;
if (Offset < 0) {
Offset = -(Offset)
}
...
}
Offset is UINT64 can not < 0, so the code logic may have some issue.
and Offset = -(Offset) may build failure in some circumstance.
Previously type cast Offset to INT64 to fix build break. Now remove
the type cast. Then can to check the code logic later.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch introduces UDF file system support in EDK2. All block devices
that support BlockIo and DiskIo protocols and contain a valid UDF file
system - as specified by OSTA Universal Disk Format (revisions 1.02
through 2.60) - will be installed EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to
provide access to underlying file system.
File system operations on regular, directory and symlink files are
supported.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Scan for UDF file systems on all block devices, as specified by OSTA
Universal Disk Format Specification 2.60, and install a Vendor-Defined
Media Device Path for each file system found.
The Vendor-Defined Media Device Path for the UDF file system is then
checked by UdfDxe to decide whether or not start the driver.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback
function for IpSec protocol, but it didn't notice that the callback will always
be executed at least once, even the protocol wasn't in handle database.
As a result, the Ip4IpSecProcessPacket() will still always call LocateProtocol()
even the IpSec protocol is not installed, which will impact the network
performance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Add one sample case about how to use HiiPopup protocol to draw message box.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the implementation of HiiPopup protocol in DisplayEngineDxe,
since DisplayEngineDxe is responsible for drawing tasks.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- Delete useless case code to fix /WHOLEARCHIVE build
error with VS2015 tool chain
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
- Delete never touched code
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-July/012385.html
reported the timeout processing in SerialRead is not consistent.
Since SerialPortPoll only checks the status of serial port and
returns immediately, and SerialPortRead does not really implement
a time out mechanism and will always wait for enough input,
it will cause below results:
1. If there is no serial input at all, this interface will return
timeout immediately without any waiting;
2. If there is A characters in serial port FIFO, and caller requires
A+1 characters, it will wait until a new input is coming and timeout
will not really occur.
This patch is to update SerialRead() to check SerialPortPoll() and
read data through SerialPortRead() one byte by one byte, and check
timeout against mSerialIoMode.Timeout if no input.
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In a form, some new menus may be dynamically inserted between highlight
menu and previous top of screen menu when some question are refreshed.
So the highlight menu and previous top of screen menu perhaps can't be
shown in one page. Existing codes miss to handle this case then will
cause incorrect display.This patch is to fix this display issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current SEC performance data getting code in FirmwarePerformancePei
may get wrong SEC performance data if FirmwarePerformancePei executes
after memory discovered.
And as SecCore has added SecPerformancePpiCallBack to get SEC performance
data and build HOB to convey the SEC performance data to DXE phase.
This patch is to remove the SEC performance data getting code in
FirmwarePerformancePei.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After calling SendForm to enter front page, configuration change in some
driver may require system reset. Currently the reset status is saved in
SendForm level. Then SendForm can return the reset status.
IsResetRequired API also can return the reset status before exiting browser.
It return the reset status in current SendForm level now. But SendForm can
be recursive called by some module.so the reset status in previous SendForm
may be lost. Now change the IsResetRequired API to return the reset info no
matter the reset is caught in any SendForm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the comments of ResetSystem() that was missed by
37078045d7 and 28426918f0.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
"The size must be large enough to fit input string supplied in
VariableName buffer" is added in the description for VariableNameSize.
And two cases of EFI_INVALID_PARAMETER are added.
1. The input values of VariableName and VendorGuid are not a name and
GUID of an existing variable.
2. Null-terminator is not found in the first VariableNameSize bytes of
the input VariableName buffer.
This patch is to update code to follow them.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Report Status Code to indicate BDS starts attempting booting
from the UEFI BootOrder list.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
PI 1.5 spec has minor update to the Data parameter for PEI
GetVariable(), and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data Points to the buffer which will hold the returned variable value.
->
Data Points to the buffer which will hold the returned variable value.
May be NULL with a zero DataSize in order to determine the size of the buffer needed.
The patch is to follow the spec to update the implementation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This path is to refine the PXE boot displayed information so as to
in line with NetworkPkg/UefiPxeBcDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently implementation doesn't accept the input during the user
is trying to select the PXE BootMenu from option 43. This path is
to fix that problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Liming Gao
Fu Siyuan
fanwang2
chenc2
Jiaxin Wu
Heyi Guo
Zenith432
Hao Wu
Star Zeng
Julien Grall
Laszlo Ersek
Paulo Alcantara
Song, BinX
Michael D Kinney
Jian J Wang
Zhang, Chao B
Dandan Bi
Ruiyu Ni
Pankaj Bansal