https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdRealTimeClockUpdateTimeout is now defined in MdeModulePkg.dec.
This is the only reason that causes PcAtChipsetPkg depends on
MdeModulePkg.
Move the PCD from MdeModulePkg.dec to PcAtChipsetPkg.dec removes
such dependency.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1844
The commit will remove the below modules from PcAtChipsetPkg:
* PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
* PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
* PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
They are considered legacy framework components and will no longer be used
after the removal of IntelFramework[Module]Pkg.
Also, the unused (after the modules being removed) PCDs will be deleted in
package level DEC/UNI files.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1646
Add the IdeControllerDxe driver to the [Components] section
to make sure it would build correctly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch updates PcatRealTimeClockRuntimeDxe to use new
EfiLocateFirstAcpiTable() and remove the duplicated code.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In certain HW implementation, the BIT7 of RTC Index register(0x70) is
for NMI sources enable/disable but the BIT7 of 0x70 cannot be read
before writing. Software which doesn't want to change the NMI sources
enable/disable setting can write to the alias register 0x74, through
which only BIT0 ~ BIT6 of 0x70 is modified.
So two new PCDs are added so that platform can have the flexibility
to change the default RTC register addresses from 0x70/0x71 to
0x74/0x75.
With the new PCDs added, it can also support special HW that provides
RTC storage in a different register pairs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In V2:
1) Update PeiAcpiTimerLib base name to PeiAcpiTimerLib
2) Update PeiAcpiTimerLib to add the missing constructor to enable ACPI IO space
3) Update DxeAcpiTimerLib to cache frequency in constructor.
PeiAcpiTimerLib caches PerformanceCounterFrequency in HOB, then Pei and Dxe
AcpiTimerLib can share the same PerformanceCounterFrequency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Use FixedPCD's to set platform-specific values for RTC registers.
Specifically, the replaced macros are:
1) RTC_INIT_REGISTER_A
2) RTC_INIT_REGISTER_B
3) RTC_INIT_REGISTER_D
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Define FixedPCD's to replace macros in RTC driver, to allow
for platform-specific configurations.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Done:
if (EFI_ERROR (Status)) {
if (PciIo != NULL && Enabled) {
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
OriginalAttributes,
NULL
);
}
}
In above codes, VS2012/VS2010 will report that "OriginalAttributes"
will be used without initialization. But in fact, when the if expression
is true(if (PciIo != NULL && Enabled)), the "OriginalAttributes" must be
initialized. In order to fix this false positive issue, we initialize the
"OriginalAttributes" after declaration.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=405
The original code enables some BITs in PCI attributes in Start(),
but wrongly to disable these BITs in Stop().
The correct behavior is to save the original PCI attributes before
enables some BITs in Start(), and restore to original value
in Stop().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=642
Add top level License.txt file with the BSD 2-Clause
License that is used by the majority of the EKD II open
source project content. Merge copyright statements
from the BSD 2-Clause License files in each package
directory and remove the duplication License.txt
file from package directories.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=553
Remove left shift of negative values that always evaluate
to 0 to address build errors from the llvm/clang compiler
used in the XCODE5 tool chain.
Clang rightfully complains about left-shifting ~DLAB. DLAB is #defined
as 0x01 (an "int"), hence ~DLAB has value (-2) on all edk2 platforms.
Left-shifting a negative int is undefined behavior.
Rather than replacing ~DLAB with ~(UINT32)DLAB, realize that the nonzero
bits of (~(UINT32)DLAB << 7) would all be truncated away in the final
conversion to UINT8 anyway. So just remove (~DLAB << 7).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Correct the reported by the codespell utility in some files
of PcAtChipsetPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The ACPI code may reserve the first entry for a certain table
(might be FACS) to help with OS compatible issues.
We need to skip the NULL table entry in RSDT/XSDT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=182
The function TimerDriverSetTimerPeriod() disables the HPET timer
while the HPET timer HW is reprogrammed with a new timer period.
However, the MMIO write to disable the HPET timer HW can be
delayed and an HPET timer interrupt may be processed in the middle
of reprogramming the HPET timer HW and this may produced unexpected
results.
The fix is to raise TPL to TPL_HIGH_LEVEL in
TimerDriverSetTimerPeriod() during the time the HPET timer HW is
reprogrammed. This guarantees that no timer interrupts are
processed during reprogramming.
The TimerDriverGenerateSoftInterrupt() function in this same
driver also raises TPL to TPL_HIGH_LEVEL, so this fix matches
the logic that is already used in another function for the same
reason.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Clear bits [31:24] after reading ACPI timer count by IoRead32(), and also add
comments "Note: The implementation uses the lower 24-bits of the ACPI timer
and is compatible with both 24-bit and 32-bit ACPI timers." in INF.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Compute the number of ticks to wait to measure TSC frequency.
Instead of (ACPI_TIMER_FREQUENCY / 10000) = 357 and 357 * 10000 = 3570000,
use 363 * 9861 = 3579543 Hz which is within 2 Hz of ACPI_TIMER_FREQUENCY.
363 counts is a calibration time of 101.4 uS.
The idea comes from Michael and Paolo.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul A Lohr <paul.a.lohr@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Minimize the code overhead between the two TSC reads by adding
new internal API to calculate TSC Frequency instead of reusing
MicroSecondDelay ().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Paul A Lohr <paul.a.lohr@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a platform which doesn't support ACPI 1.0 (no XSDT) and FADT
is not produced at the first time when ACPI table is published,
GetCenturyRtcAddress() unconditionally deference Rsdp->RsdtAddress
but Rsdp->RsdtAddress is 0 in this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In 32bit environment, ScanTableInSDT() incorrectly copies 8 bytes
of data to 4-byte pointer Table, which causes the stack corruption.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Update ResetSystemLib with PCDs for Reset Control Register and Value
instead of hard code 0x64 and 0xFE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
When ACPI table is installed before PcRtc driver runs,
the ACPI table installation callback isn't called which causes the
century value isn't written to the CMOS.
The patch calls GetCenturyRtcAddress() in entry point to fix
the bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
The patch moves ACPI parsing code to a separate function
GetCenturyRtcAddress() and the next patch will call this
function in driver entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Anbazhagan Baraneedharan <anbazhagan@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister) &
EnableMask) != EnableMask)) {
The bracket place is not right, I think it should be
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister)) &
EnableMask) != EnableMask)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: wang xiaofeng <winggundum82@163.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MdeModulePkg contains a new PciHostBridgeDxe driver which is a
super set of PcAtChipsetPkg/PciHostBridgeDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch fixes a regression bug caused by last check-in which
causes Daylight setting cannot be set when timezone is unspecified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When SetTime() is called with EFI_UNSPECIFIED_TIMEZONE, the code
can optimally not create the private timezone variable because
absence of timezone variable indicates the timezone is unspecified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19783 6f19259b-4bc3-4df7-8a09-765794883524
When overriding compiler options '/GL' with '/GL-', VS2010 will report
warning C4701 potentially uninitialized local variable for 'LcrParity'
and 'LcrStop' in function SerialPortSetAttributes().
This commit fixes this build issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19629 6f19259b-4bc3-4df7-8a09-765794883524
The patch updates the Century value in CMOS location specified
by FADT.Century to avoid UEFI Win7 hang during booting.
Per the ACPI spec if the FADT.Century is zero, it's not needed
to store the century value in CMOS. But UEFI Win7 treats the
Century storage is optional only when FADT.Century is 0x80.
While Linux strictly follows the ACPI spec and treats Century
storage is optional when FADT.Century is 0.
So if a platform wants to support both UEFI Win7 and Linux,
it needs to report FADT.Century to a traditional value which
doesn't equal to 0 or 0x80 (0x32 mostly). And RTC driver is
enhanced to save the century value to the location specified
by FADT.Century.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19442 6f19259b-4bc3-4df7-8a09-765794883524
Michael D Kinney
Sean Brogan
Ray Ni
Hao A Wu
Zhichao Gao
Bret Barkelew
Star Zeng
Chen A Chen
Liming Gao
Ruiyu Ni
Dandan Bi
Leo Duran
Thomas Huth
Giri P Mudusuru
wang xiaofeng