* In old implementation, the operation len-- assumes AsciiSPrint()
has counted NULL terminator, and it's not correct. This patch is
to fix this issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
* Library API should check the input parameters before use, or
ASSERT to tell it has to meet some requirements. But in DxeNetLib,
not all functions follows this rule.
* ASSERT shouldn't be used as error handling, add some handling code
for errors.
* Add some ASSERT commence in function notes.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The NIC_ITEM_CONFIG_SIZE macro in DxeNetLib is defined as:
sizeof (NIC_IP4_CONFIG_INFO) + sizeof (EFI_IP4_ROUTE_TABLE) *
MAX_IP4_CONFIG_IN_VARIABLE. This macro should be surrounded
with parenthesis to avoid being incorrectly used.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This is caused by a previous patch which tried to fix string over-read.
It's found that that patch for PrintLib in MdePkg will cause premature
terminating of loop used to traversing format string and cause incomplete
string output. Because this library uses similar code to do the same
job, it has the same issue too. So the fix is also the same.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
According to UEFI/PI spec, the AllocateXXXPool() interfaces should
return eight-byte aligned buffer that satisfies the required
HEADER_ALIGNMENT which is 4.
This patch adds ASSERT to make sure the bin at required alignment,
that can help catch the issue earlier about incorrect aligned buffer
returned from AllocateXXXPool().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
BfvHeader->FvLength is UINT64. Now, it prints with %x. It will cause the
late FvHandle to be as zero. So, its type is converted to UINT32.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Due to a potential hole in the stop condition of loop, the two continuous
access to ArgumentString (index, index+1) inside the loop might cause the
string ending character ('\0') and the byte after it to be read.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This change is the additional fix of commit
14b351e2ed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* Fix GCC the build error.
This patch is to add the boundary condition check to make sure
the accessed buffer is valid.
Cc: Gary Lin <glin@suse.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Three issues addressed here:
a. Make NX memory protection and heap guard to be compatible
The solution is to check PcdDxeNxMemoryProtectionPolicy in Heap Guard to
see if the free memory should be set to NX, and set the Guard page to NX
before it's freed back to memory pool. This can solve the issue which NX
setting would be overwritten by Heap Guard feature in certain
configuration.
b. Returned pool address was not 8-byte aligned sometimes
This happened only when BIT7 is not set in PcdHeapGuardPropertyMask. Since
8-byte alignment is UEFI spec required, letting allocated pool adjacent to
tail guard page cannot be guaranteed.
c. NULL address handling due to allocation failure
When allocation failure, normally a NULL will be returned. But Heap Guard
code will still try to adjust the starting address of it, which will cause
a non-NULL pointer returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update PCD driver to retrieve the default setting and set the initial
EFI variable when PcdSetNvStoreDefaultId is set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Update HiiDataBase to retrieve the default setting and patch IFR data
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=611
Add two PCDs and new PCD DB format definition
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PEI may report the normal format variable storage HOB for the default
EFI variable. VariableDxe needs to support it and set them into NV variable
region.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch updates the constructor of DpcLib to return error if failed to
locate DPC protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch fixes a bug in Ip4ConfigProtocol, that new created IP interface is
not freed if Open ARP protocol failed.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Instance->Dhcp4Event is not necessary to be created in Ip4Config2InitInstance.
Because it will created in Ip4StartAutoConfig() later.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
This patch updates the DxeIpIoLib to check the input parameters before using.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch updates some API descriptions in DxeIpIoLib to match the real
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In DxeIpIo, there are several places not check the returned value of called functions.
This patch is to add the error handling to these functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The root cause is that mImagePropertiesPrivateData.CodeSegmentCountMax was
not updated with correct value due to the fact that SortImageRecord() called
before might change the content of current ImageRecord. This will in turn
cause incorrect memory map entries generated in SplitTable().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in MdeModulePkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
This patch updates the DxeIpIoLib to return EFI_INVALID_PARAMETER instead of
ASSERT if the input pointers are not correct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch updates the IP4 driver to use error status code instead of ASSERT
if failed to allocate memory buffer.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
The root cause of this issue is that, during splitting page table, the page
size should be the value of next level (smaller one) instead of current level.
The wrong page size will then cause wrong page table introduced, which will
break the normal boot.
Validation works include booting to Windows 10 and Fedora 26 on real Intel
platform and OVMF emulated platform in addition to manual checks on page
table with JTAG tool.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
As some implementation of SMM Child Dispatcher (including SxDispatch)
may deny the handler registration after SmmReadyToLock, using
SxDispatch in SmmReadyToBootHandler() will be too late.
This patch updates code to use SxDispatch in SmmEndOfDxeHandler()
instead of SmmReadyToBootHandler().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch is to resolve the issue reported @
https://bugzilla.tianocore.org/show_bug.cgi?id=804.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is to discard the normal ICMP packets and recycle the received
ICMP data to avoid the memory leak.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Heyi Guo <heyi.guo@linaro.org>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
One issue is that macros defined in HeapGuard.h
GUARD_HEAP_TYPE_PAGE
GUARD_HEAP_TYPE_POOL
doesn't match the definition of PCD PcdHeapGuardPropertyMask in
MdeModulePkg.dec. This patch fixed it by exchanging the BIT0 and BIT1
of them.
Another is that method AdjustMemoryF() will return a bigger NumberOfPages than
the value passed in. This is caused by counting twice of a shared Guard page
which can be used for both head and tail Guard of the memory before it and
after it. This happens only when partially freeing just one page in the middle
of a bunch of allocated pages. The freed page should be turned into a new
Guard page.
Cc: Jie Lin <jie.lin@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
One issue is that macros defined in HeapGuard.h
GUARD_HEAP_TYPE_PAGE
GUARD_HEAP_TYPE_POOL
doesn't match the definition of PCD PcdHeapGuardPropertyMask in
MdeModulePkg.dec. This patch fixed it by exchanging the BIT0 and BIT1
of them.
Another is that method AdjustMemoryF() will return a bigger NumberOfPages than
the value passed in. This is caused by counting twice of a shared Guard page
which can be used for both head and tail Guard of the memory before it and
after it. This happens only when partially freeing just one page in the middle
of a bunch of allocated pages. The freed page should be turned into a new
Guard page.
Cc: Jie Lin <jie.lin@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.c: In function
> 'SmmReadyToBootHandler':
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.c:323:14: error: passing argument
> 3 of 'SmmLocateProtocol' from incompatible pointer type [-Werror]
> );
> ^
> In file included from MdeModulePkg/Core/PiSmmCore/PiSmmCore.c:15:0:
> MdeModulePkg/Core/PiSmmCore/PiSmmCore.h:586:1: note: expected 'void **'
> but argument is of type 'struct EFI_SMM_SX_DISPATCH2_PROTOCOL **'
> SmmLocateProtocol (
> ^
> cc1: all warnings being treated as errors
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Fixes: 7b9b55b2ef
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
When UEFI receives ICMP echo packets it will enter Ip4IcmpReplyEcho
function, and then call Ip4Output. However, if Ip4Output gets some
error and exits early, e.g. fails to find the route entry, memory
buffer of "Data" gets no chance to be freed and memory leak will be
caused. If there is such an attacker in the network, we will see UEFI
runs out of memory and system hangs.
So we explicitly free the memory when error status is returned.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Junbiao Hong <hongjunbiao@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Otherwise, LegacyBoot may be triggered wrongly by other code in UEFI OS,
or vice versa.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Otherwise, it may be triggered wrongly by other code in OS.
This patch is to use S3 entry callback to determine if it will be
during S3 resume, and check it in SmmReadyToBootHandler().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID
may be used to install PPI in future to notify PEI phase code.
The references in UefiCpuPkg are also being updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It is missing to update the prototype of SmmCommunicationCommunicate()
in d1632f694b.
This patch is to add it.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
This patch updates TcpIoConnect() and TcpIoAccept() that the Tcp.Cancel()
should be invoked to cancel the corresponding request when timeout occurs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
For TcpIoConnect() and TcpIoAccept(), this patch adds the check for Timeout event
before calling CheckEvent() service so as to avoid the unnecessary function call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch will set the memory pages used for page table as read-only
memory after the paging is setup. CR0.WP must set to let it take into
effect.
A simple page table memory management mechanism, page table pool concept,
is introduced to simplify the page table memory allocation and protection.
It will also help to reduce the potential recursive "split" action during
updating memory paging attributes.
The basic idea is to allocate a bunch of continuous pages of memory in
advance as one or more page table pools, and all future page tables
consumption will happen in those pool instead of system memory. If the page
pool is reserved at the boundary of 2MB page and with same size of 2MB page,
there's no page granularity "split" operation will be needed, because the
memory of new page tables (if needed) will be usually in the same page as
target page table you're working on.
And since we have centralized page tables (a few 2MB pages), it's easier
to protect them by changing their attributes to be read-only once and for
all. There's no need to apply the protection for new page tables any more
as long as the pool has free pages available.
Once current page table pool has been used up, one can allocate another 2MB
memory pool and just set this new 2MB memory block to be read-only instead of
setting the new page tables one page by one page.
Two new PCDs PcdPageTablePoolUnitSize and PcdPageTablePoolAlignment are used
to specify the size and alignment for page table pool. For IA32 processor
0x200000 (2MB) is the only choice for both of them to meet the requirement of
page table pool.
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
DUAL_ADDRESS_CYCLE is missing in the EFI_UNSUPPORTED
return status description.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Move ClearFirst4KPage/IsNullDetectionEnabled definition from DxeIpl.h to
VirtualMemory.h as they are implemented in VirtualMemory.c and only used
in IA32/X64 ARCH.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In CheckRemainingSpaceForConsistencyInternal, one of the return paths leaves a loose
VA_COPY with no matching VA_END.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code always return EFI_MEDIA_CHANGED no matter the media
is removed from CD/DVD drive or the media is changed.
It doesn't strictly follow the UEFI Spec.
Update code to return EFI_NO_MEDIA when media is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Stack guard feature makes use of paging mechanism to monitor if there's a
stack overflow occurred during boot.
This patch will check setting of PCD PcdCpuStackGuard. If it's TRUE, DxeIpl
will setup page table and set the page at which the stack base locates to be
NOT PRESENT. If stack is used up and memory access cross into the last page
of it, #PF exception will be triggered.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
Original API InitializeCpuExceptionHandlers is used in DxeMain to initialize
exception handlers but it does not support setting up stack switch required
by Stack Guard feature. Using the new API instead to make sure Stack Guard
feature is applicable to most part of code.
Since this API is called before memory service initialization, there's no
way to call AllocateXxx API to reserve memory. Global variables are used
for this special case. GDT table is reserved at least 2KB which should be
big enough for all current use cases.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
This patch add implementation of new API InitializeCpuExceptionHandlersEx
introduced into CpuExceptionHandlerLib on behalf of Stack Guard feature.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
A new API InitializeCpuExceptionHandlersEx() is introduced to support
initializing exception handlers with extra functionalities which need
extra init data, such as stack switch for Stack Guard feature.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
By default, this method should include all functionalities implemented by
InitializeCpuExceptionHandlers(), plus extra initialization works, if any.
This is could be done by calling InitializeCpuExceptionHandlers() directly
in this method besides the extra works.
InitData is optional and its use and content are processor arch dependent.
The typical usage of it is to convey resources which have to be reserved
elsewhere and are necessary for the extra initialization of exception.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
PcdCpuStackGuard is introduced to enable/disable Stack Guard feature.
Its value is FALSE by default. This feature is suggested to be enabled
only if the cpu driver and CpuExceptionHandlerLib have supported stack
switch for the processor used in platform. Otherwise the exception dump
message won't be printed out when there's a stack overflow happened.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
AIP may not support detecting network media state, in this case,
should call NetLibDetectMedia to get media state. This patch is to
fix this issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Handle CommSize OPTIONAL case for SmmCommunicate.
And return EFI_ACCESS_DENIED when CommunicationBuffer
is not valid for SMM to access.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In wireless connection, connecting state needs to be cared more
about. ECR 1772 redefined the state EFI_NOT_READY to represent
connecting state and can be retrieved from Aip protocol. This
patch adds a new API to check media state at a specified time
interval when network is connecting until the connection process
finishes or timeout.
V2:
* Return error status code directly when Aip protocol falied to detect
media rather than wait for another time's check.
* Set media state default value to EFI_SUCCESS since some platforms may
not support retrieving media state from Aip protocol.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit removes unnecessary parentheses in 'if' statements to
resolve the build failures by the XCODE5 tool chain.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 7eb927db3e ("MdeModulePkg/DxeCore: implement memory protection
policy", 2017-02-24), we added two informative messages with the
InitializeDxeNxMemoryProtectionPolicy() function:
> InitializeDxeNxMemoryProtectionPolicy: applying strict permissions to
> active memory regions
and
> InitializeDxeNxMemoryProtectionPolicy: applying strict permissions to
> inactive memory regions
The messages don't report errors or warnings, thus downgrade their log
masks from DEBUG_ERROR to DEBUG_INFO.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1520485
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It fixes the warning for loop has empty body [-Werror,-Wempty-body].
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liang Vincent <vincent.liang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Sort and merge memory resource entries to handle the case that
the memory resource HOBs are reported differently between
BOOT_ON_FLASH_UPDATE boot mode and normal boot mode, and the
capsule buffer from UpdateCapsule at normal boot sits across
two memory resource descriptors at BOOT_ON_FLASH_UPDATE boot mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Tested-by: Dakota Chiang <dakota.chiang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Commit f6b139b added return status handling to PciIo->Mem.Write.
However, the second status handling will override EFI_DEVICE_ERROR
returned in this branch:
//
// Check the NVMe cmd execution result
//
if (Status != EFI_TIMEOUT) {
if ((Cq->Sct == 0) && (Cq->Sc == 0)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_DEVICE_ERROR;
^^^^^^^^^^^^^^^^
Since PciIo->Mem.Write will probably return SUCCESS, it causes
NvmExpressPassThru to return SUCCESS even when DEVICE_ERROR occurs.
Callers of NvmExpressPassThru will then continue executing which may
cause further unexpected results, e.g. DiscoverAllNamespaces couldn't
break out the loop.
So we save previous status before calling PciIo->Mem.Write and restore
the previous one if it already contains error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The USED_SIZE FV_EXT_TYPE is introduced by PI 1.6 spec.
The EFI_FIRMWARE_VOLUME_EXT_ENTRY_USED_SIZE_TYPE can be used to find
out how many EFI_FVB2_ERASE_POLARITY bytes are at the end of the FV.
When the FV gets shadowed into memory you only need to copy the used
bytes into memory and fill the rest of the memory buffer with the
erase value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No need to allocate aligned buffer if FvImage has been
at required alignment.
Then the code logic will be aligned with ProcessFvFile() in
MdeModulePkg/Core/Pei/FwVol/FwVol.c.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The USED_SIZE FV_EXT_TYPE is introduced by PI 1.6 spec.
The EFI_FIRMWARE_VOLUME_EXT_ENTRY_USED_SIZE_TYPE can be used to find
out how many EFI_FVB2_ERASE_POLARITY bytes are at the end of the FV.
When the FV gets shadowed into memory you only need to copy the used
bytes into memory and fill the rest of the memory buffer with the
erase value.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After commit 91cc526b15 "MdeModulePkg/SerialDxe: Fix not able to change
serial attributes", serial is initialized using the reset method that
will call SetAttributes.
However, SetAttributes may return EFI_INVALID_PARAMETER when a driver
does not support some parameters. This will be propagated by the reset
function and lead to UEFI failing to get the console setup.
For instance, this is the case when using the Xen console driver.
Fix it by introspecting the result and return EFI_SUCCESS when the
SetAttributes report an invalid parameter (i.e EFI_INVALID_PARAMETER).
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
SerialSetAttributes is meant to match the behavior of the function
EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the UEFI spec (v2.7). This
means the function can only return:
- EFI_SUCCESS
- EFI_INVALID_PARAMETER
- EFI_DEVICE_ERROR
However the function SerialPortSetAttributes may also validly return
EFI_UNSUPPORTED. For instance this is the case of the Xen Console
driver.
EFI_UNSUPPORTED could be also interpreted as "One or more of the attributes
has an unsupported value". So return EFI_INVALID_PARAMETER in that case.
Lastly, to prevent another return slipping in the future, all the errors
but EFI_INVALID_PARAMETER and EFI_UNSUPPORTED will return
EFI_DEVICE_ERROR.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Per the UEFIv2.7 spec, EFI_DEVICE_ERROR is returned when the serial
device is not functioning correctly. Update the description to avoid
confusion.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DXE performance gauge record access functions might be reentered since
we are supporting something like USB hot-plug, which is a timer event
where gBS->ConnectController might be called and then PERF will be
called in CoreConnectSingleController.
When StartGaugeEx is being reentered, not only the gauge record might
be overwritten, more serious situation will be caused if gauge data
buffer reallocation procedure is interrupted, between line 180 and 187
in DxeCorePerformanceLib.c specifically. There, mMaxGaugeRecords will
be doubled twice (denoted as 4X), but mGaugeData only points to a
buffer of size 2X, which will probably cause the following 2X memory
to be overflowed when gauge records are increased.
So we add EFI lock with TPL_NOTIFY in StartGaugeEx/EndGaugeEx/GetGaugeEx
to avoid memory overflow and gauge data corruption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable the device
at ExitBootServices()"
This reverts commit 6fb8ddd36b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch caused Windows 10 S4 resume failure.
Considering the similar changes are reverted from PciBus driver,
revert the patch from AtaAtapiPassThru as well.
Revert "MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at
ExitBootServices()"
This reverts commit 76fd5a660d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Once the paging capabilities were filtered out, there might be some adjacent entries
sharing the same capabilities. It's recommended to merge those entries for the OS
compatibility purpose.
This patch makes use of existing method MergeMemoryMap() to do it. This is done by
simply turning this method from static to extern, and call it after filter code.
This patch is related to an issue described at
https://bugzilla.tianocore.org/show_bug.cgi?id=753
This patch is also passed test of booting follow OSs:
Windows 10
Windows Server 2016
Fedora 26
Fedora 25
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Under the following scenario:
- no UEFI bootable application available anywhere in the system,
- ... not even for the default platform recovery option,
- no shell is built into the firmware image,
- but UiApp is available in the firmware image,
we should preferably not just hang in BdsEntry() with:
DEBUG ((EFI_D_ERROR, "[Bds] Unable to boot!\n"));
CpuDeadLoop ();
while the user sits at the TianoCore logo page, wondering what's going on.
Print an informative message to the console, wait for a keypress, and then
return to the Boot Manager Menu forever.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=513
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some OSs will treat EFI_MEMORY_DESCRIPTOR.Attribute as really
set attributes and change memory paging attribute accordingly.
But current EFI_MEMORY_DESCRIPTOR.Attribute is assigned by
value from Capabilities in GCD memory map. This might cause
boot problems. Clearing all paging related capabilities can
workaround it. The code added in this patch is supposed to
be removed once the usage of EFI_MEMORY_DESCRIPTOR.Attribute
is clarified in UEFI spec and adopted by both EDK-II Core and
all supported OSs.
Laszlo did a thorough test on OVMF emulated platform. The details
can be found at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the method DumpGuardedMemoryBitmap() and SetAllGuardPages(), the code
didn't check if the global mMapLevel is legal value or not, which leaves
a logic hole causing potential array overflow in code followed.
This patch adds sanity check before any array reference in those methods.
Cc: Wu Hao <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
The coding style requires that header files must be also added in module's inf
file, as long as they're included by c files. This patch will fix this issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Update the UhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch is following 2c656af04d.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 5db417ed25.
"MdeModulePkg/PciBusDxe: Enable Bus Master on P2P bridges on demand"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit 050763db07.
"MdeModulePkg/PciBus: Disable BME of all devices when entering RT"
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Cc: Michael D Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
EfiBootManagerStartHotkeyService() asserts when "BootOptionSupport"
variable doesn't exist.
In fact, though "BootOptionSupport" variable is set in BdsDxe
module, it's possible that the variable is deleted by
PlatformBootManagerBeforeConsole().
The patch removes the assertion and adds code to handle the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
If a USB Mass Storage device does not support the Get
Max LUN command, then the USB I/O Protocol ControlTransfer()
service may return an error. If an error is returned for
this command, then assume that the device does not support
multiple LUNs and return a maximum LUN value of 0.
The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid. Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.
This change improves compatibility with USB FLASH drives
that do not support the Get Max LUN command or return
an invalid maximum LUN value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=767
The USB I/O Protocol function ControlTransfer() has a DataLength
parameter that specifies the size of the Data buffer. The
UsbBusDxe module implements the USB I/O Protocol using the
services of the USB2 Host Controller Protocol. The DataLength
parameter in the USB2 Host Controller Protocol ControlTransfer()
service is an IN OUT parameter so the number of bytes actually
transferred is returned. Since the USB I/O Protocol
ControlTransfer() service can not return the number of bytes
actually transferred, the only option if the number of bytes
actually transferred is less than the number of bytes requested
is to return EFI_DEVICE_ERROR.
The change fixes an issue with a USB mass storage device that
responds with 0 bytes to the Get MAX LUN command.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The build error is introduced by following check in:
2930ef9809235a4490c8
The Visual Studio older than 2015 doesn't support constant integer
in binary format (0bxxx). This patch changes them to BIT macro to
fix it. This patch also cleans up coding style about unmatched
comment for return value.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Following check-in caused this issue:
2930ef9809
This issue is caused by assigning incorrect value to PoolHdr.Size
if the requested size is more than MAX_POOL_SIZE, because the SMM
core will actually allocate page memory instead of pool memory in
this situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Wu Hao <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu Hao <hao.a.wu@intel.com>
Tested-by: Wu Hao <hao.a.wu@intel.com>
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=782
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
USB_BOOT_ASC_MEDIA_CHANGE -> EFI_MEDIA_CHANGE
USB_BOOT_ASC_NOT_READY -> EFI_NOT_READY
USB_BOOT_ASC_NO_MEDIA -> EFI_NOT_READY
All others -> EFI_DEVICE_ERROR
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the SdBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Update the EmmcBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2 changes:
Resource cleanup logic update in UfsEndOfPei().
V1 history:
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1. Call IoMmuInit() after locating gPeiUsbControllerPpiGuid.
2. Call XhcPeiFreeSched() to do cleanup in XhcEndOfPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT2 and BIT3 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for SMM page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiRuntimeServicesCode
and EfiRuntimeServicesData by setting the PCD with value 0x60.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
This feature is controlled by three PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
BIT0 and BIT1 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiBootServicesData
and EfiRuntimeServicesData by setting the PCD with value 0x50.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Note1: Turning on heap guard, especially pool guard, will introduce too many
memory fragments. Windows 10 has a limitation in its boot loader, which
accepts at most 512 memory descriptors passed from BIOS. This will prevent
Windows 10 from booting if heap guard is enabled. The latest Linux
distribution with grub boot loader has no such issue. Normally it's not
recommended to enable this feature in production build of BIOS.
Note2: Don't enable this feature for NT32 emulation platform which doesn't
support paging.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard feature needs paging to work properly. 64-bit BIOS uses
PcdDxeIplBuildPageTables to control the page table setup. 32-bit BIOS
has to check heap guard feature to decide enabling paging or not.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add definitions and strings for following new PCDs:
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=766
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=765
The UEFI Specification Boot Services chapter, StartImage() service,
EFF 1.10 Extension requires extra calls to ConnectController()
if a UEFI Driver produces handles. The DXE Core is performing these
extra calls to ConnectController() without evaluating the ImageType.
A filter is added to not make extra calls to ConnectController()
if the ImageType is EFI_IMAGE_SUBSYSTEM_EFI_APPLICATION.
Without this filter, extra calls to ConnectController() may be
performed by UEFI Applications or a UEFI Shell Applications that
also call ConnectController().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=761
When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters. The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.
The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.
GEOMETRICSHAPE_UP_TRIANGLE '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE '>'
GEOMETRICSHAPE_DOWN_TRIANGLE 'v'
GEOMETRICSHAPE_LEFT_TRIANGLE '<'
ARROW_UP '^'
ARROW_DOWN 'v'
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.
This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit. Consequently, only two
possible addresses may result:
{<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2). In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".
Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
=> Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
=> Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
=> No more character so SerialPortPoll() will return FALSE and loop
until timeout
=> Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed
After some investigation, I found it is related to the Timeout value.
The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
2 * 1000000 / (UINTN) Mode->BaudRate;
}
For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8 + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).
When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
SerialIo->SetAttributes() ->
SerialSetAttributes() ->
SerialPortSetAttributes()
Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.
SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.
And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
For PciIoPciRead interface, memory prior to Buffer would be written
with zeros if Offset was larger than sizeof (Dev->ConfigSpace), which
would cause serious system exception.
So we add a pre-check branch to avoid memory override.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The patch ensures all DMA transactions are blocked after
ExitBootService.
If a platform enables IOMMU before and needs disable IOMMU after
ExitBootService, the IOMMU should be disabled after PCI bus driver
disables BME.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
V3:
(1) Reset QuestionStoredInBitField to FALSE at end opcode(EFI_IFR_END_OP)
(2) Fix typo and format issues(line alignment for debug print message
and value assignment...)
V2:
(1)Remove the VarOffsetBitLevel/StorageWidthBitLevel to reduce the final
VarCheckBinSize and update the implementation accordingly.
(2)Update the VAR_CHECK_HII_REVISION
(3)Refine the Debug message and function comments,like update oneof",
"checkbox", "numeric" to "OneOf", "CheckBox", "Numeric".
VarCheckHiiLib check the value set to storage based on the possible value
listed in the vfr file. Since we have enhanced vfr to support Question
value stored in bit field, so now enhance VarCheckHiiLib to support bit
field check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In patch 2, we will introduce DEBUG_INFO in VarCheckHiiLib,in order to keep
consistence, replace all EFI_D_INFO with DEBUG_INFO firstly in this pacth.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Currently, we complete a synchronous operation without unmapping the
DMA mappings, and free the pages using FreePages () rather than calling
EFI_PCI_IO_PROTOCOL::FreeBuffer. This is simply incorrect, but it also
breaks non-coherent DMA as well as DMA protection and/or memory encryption
so let's do it correctly and call SdMmcFreeTrb() instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly
Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
It's a regression of below commit:
SHA-1: 8be37a5cee
* MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe
When PciBus driver fails to load the Option ROM, it doesn't produce
BusOverride protocol. It was a correct behavior before the above
commit. But due to the above commit, BusOverride protocol never is
produced by PciBus driver.
The patch fixes this issue using the following solution:
1. PciBus records the image device path when LoadImage fails.
2. Override.GetDriver() tries to look for the image handle using
the stored image device path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch shouldn't impact functionality.
Original code records the ImageHandle of Option ROM by creating a
new entry. It's not necessary.
The patch updates the ImageHandle in the old entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch doesn't impact real functionality.
It only renames EFI_PCI_ROM_IMAGE_MAPPING to PCI_ROM_IMAGE,
and changes prototype of PciRomAddImageMapping so that
no explicit type cast is needed when calling this function.
It also removes unused field RomBase from PCI_IO_DEVICE structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Clearing I/O port decoding in the PCI command register at
ExitBootServices() breaks IDE boot in Windows, on QEMU's "pc" (i440fx)
machine type. (AHCI boot on "q35" is unaffected.) Windows seems repeatedly
stuck, apparently waiting for a timeout of sorts.
This is arguably a Windows bug; a native OS driver should not expect the
firmware to leave the PCI command register in any particular state.
Strictly speaking, we only need to disable BM-DMA at ExitBootServices(),
in order to abort pending transfers to/from RAM, which is soon to be owned
by the OS. BM-DMA is also the only bit that's explicitly named by the UEFI
Driver Writers' Guide, for clearing at ExitBootServices().
I've verified that clearing only BM-DMA fixes the issue (boot time) on
i440fx, and does not regress q35/AHCI.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dann Frazier <dannf@ubuntu.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Reported-by: Dann Frazier <dannf@ubuntu.com>
Reported-by: https://launchpad.net/~cjkrupp
Bisected-by: Dann Frazier <dannf@ubuntu.com>
Bisected-by: https://launchpad.net/~cjkrupp
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: https://bugs.launchpad.net/ubuntu/+source/edk2/+bug/1725560
Fixes: 6fb8ddd36b
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
According the UEFI spec 2.7 A:
In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
the default IPv4 address if it is not available yet."
In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these configurations
are retrieved from DHCP server or other auto-configuration mechanism."
This patch is to align with the above description. When the default IPv4
address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
Ip4Config2 protocol will be called to retrieve the default address by setting
the policy to Ip4Config2PolicyDhcp.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
VariableRuntimeDxe deletes and locks the MorLock variable in
MorLockInit(), with the argument that any protection provided by MorLock
can be circumvented if MorLock can be overwritten by unprivileged code
(i.e., outside of SMM).
Extend the argument and the logic to the MOR variable, which is supposed
to be protected by MorLock. Pass Attributes=0 when deleting MorLock and
MOR both.
This change was suggested by Star; it is inspired by earlier VariableSmm
commit fda8f631ed ("MdeModulePkg/Variable/RuntimeDxe: delete and lock
OS-created MOR variable", 2017-10-03).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Make the comments align with the function.
And add some missing function comments.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The bug was caused by 728d74973c
"MdeModulePkg/PciBus: Count multiple hotplug resource paddings".
The patch firstly updated the Bridge->Alignment to the maximum
alignment of all devices under the bridge, then aligned the
Bridge->Length to Bridge->Alignment.
It caused too much resources were claimed.
The new patch firstly aligns Bridge->Length to Bridge->Alignment,
then updates the Bridge->Alignment to the maximum alignment of all
devices under the bridge.
Because the step to update the Bridge->Alignment is to make sure
the resource allocated to the bus under the Bridge meets all
devices alignment. But the Bridge->Length doesn't have to align
to the maximum alignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Existing code forgot to set Descriptor->SpecificFlag to 0 when
the resource type is non-prefetchable MMIO.
The patch adds the missing assignment.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This is the regression issue. After apply CalculateCrc32(), the parameter
check is missing.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Wu Hao A <hao.a.wu@intel.com>
Install EdkiiSmmEndOfS3ResumeProtocol when S3 resume finished.
S3ResumePei will send S3 resume finished event to SmmCore through
communication buffer.
V2 change:
None.
V3 change:
1. Uninstall the protocol right after install it to avoid run out of memory.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add gEdkiiSmmEndOfS3ResumeProtocolGuid which used by SmmCore to
notify smm drives that S3 resume has finished.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current implementation skips to check whether the last four
characters are digits when the OptionNumber is NULL.
Even worse, it may incorrectly return FALSE when OptionNumber is
NULL.
The patch fixes it to always check the variable name even
OptionNumber is NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BmCharToUint() could be called using external data and it
already contains logic to return -1 when data is invalid,
so removing unnecessary assertion to avoid system hang.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of issue caused by enabling NULL pointer detection is that some PCI
device OptionROM, binary drivers and binary OS boot loaders may have NULL
pointer access bugs, which will prevent BIOS from booting and is almost
impossible to fix. BIT7 of PCD PcdNullPointerDetectionPropertyMask is used
as a workaround to indicate BIOS to disable NULL pointer detection right
after event gEfiEndOfDxeEventGroupGuid, and then let boot continue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
NULL pointer detection is done by making use of paging mechanism of CPU.
During page table setup, if enabled, the first 4-K page (0-4095) will be
marked as NOT PRESENT. Any code which unintentionally access memory between
0-4095 will trigger a Page Fault exception which warns users that there's
potential illegal code in BIOS.
This also means that legacy code which has to access memory between 0-4095
should be cautious to temporarily disable this feature before the access
and re-enable it afterwards; or disalbe this feature at all.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PCD PcdNullPointerDetectionPropertyMask is a bitmask used to control the
NULL address detection functionality in code for different phases.
If enabled, accessing NULL address in UEFI or SMM code can be caught
as a page fault exception.
BIT0 - Enable NULL pointer detection for UEFI.
BIT1 - Enable NULL pointer detection for SMM.
BIT2..6 - Reserved for future uses.
BIT7 - Disable NULL pointer detection just after EndOfDxe. This is a
workaround for those unsolvable NULL access issues in
OptionROM, boot loader, etc. It can also help to avoid
unnecessary exception caused by legacy memory (0-4095) access
after EndOfDxe, such as Windows 7 boot on Qemu.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
FV3 HOB was introduced by new (>= 1.5) PI spec, it is intended to
be used to propagate PEI-phase FV authentication status to DXE.
This patch is to update PeiCore to build FV3 HOB with the
authentication status and DxeCore to get the authentication
status from FV3 HOB when producing FVB Protocol.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to the TCG Platform Reset Attack Mitigation Specification (May
15, 2008):
> 5 Interface for UEFI
> 5.1 UEFI Variable
> 5.1.1 The MemoryOverwriteRequestControl
>
> Start of informative comment:
>
> [...] The OS loader should not create the variable. Rather, the firmware
> is required to create it and must support the semantics described here.
>
> End of informative comment.
However, some OS kernels create the MOR variable even if the platform
firmware does not support it (see one Bugzilla reference below). This OS
issue breaks the logic added in the last patch.
Strengthen the MOR check by searching for the TCG or TCG2 protocols, as
edk2's implementation of MOR depends on (one of) those protocols.
The protocols are defined under MdePkg, thus there's no inter-package
dependency issue. In addition, calling UEFI services in
MorLockInitAtEndOfDxe() is safe, due to the following order of events /
actions:
- platform BDS signals the EndOfDxe event group,
- the SMM core installs the SmmEndOfDxe protocol,
- MorLockInitAtEndOfDxe() is invoked, and it calls UEFI services,
- some time later, platform BDS installs the DxeSmmReadyToLock protocol,
- SMM / SMRAM is locked down and UEFI services become unavailable to SMM
drivers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1498159
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The "MemoryOverwriteRequestControl" (a.k.a. MOR) variable comes from the
"TCG Platform Reset Attack Mitigation Specification":
https://www.trustedcomputinggroup.org/wp-content/uploads/Platform-Reset-Attack-Mitigation-Specification.pdf
The "MemoryOverwriteRequestControlLock" variable (a.k.a. MORL) is a
Microsoft extension, called "Secure MOR implementation":
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/device-guard-requirements
Currently the VariableSmm driver creates MORL without regard to MOR. This
can lead to a situation where a platform does not support MOR from the
prerequisite spec (because it does not include the
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf" driver), but appears
to support MORL from the dependent Microsoft spec.
"winload.efi" notices this inconsistency, and disables the Device Guard
Virtualization Based Security in Windows Server 2016 and Windows 10 64-bit
Enterprise.
If the platform includes
"SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf", then MOR will exist
by the time EndOfDxe is reached, and VariableSmm can safely create MORL.
Otherwise, do not create MORL (delete it if it exists), and also prevent
other modules from creating it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=727
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1496170
Reported-by: Ladi Prosek <lprosek@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The SetMorLockVariable() function sets "mMorLockPassThru" to TRUE
temporarily, so that it can set the MOR Control Lock variable to
well-formed values without permission checks.
In the next patch, we'll need the same override for deleting the MOR
Control Lock variable; hence obey "mMorLockPassThru" in the deletion
branch of SetVariableCheckHandlerMorLock() as well.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Introduce the MorLockInitAtEndOfDxe() hook, in order to allow
MorLockInit() to delay / queue operations until EndOfDxe. (Or, if the
platform never signals EndOfDxe, until ReadyToBoot.)
Call MorLockInitAtEndOfDxe() whenever we set "mEndOfDxe" to TRUE:
- in VariableRuntimeDxe:
- in the OnReadyToBoot() function,
- in the OnEndOfDxe() function;
- in VariableSmm:
- on the SMM_VARIABLE_FUNCTION_READY_TO_BOOT SMI request,
- in the SmmEndOfDxeCallback() function.
For now, implement MorLockInitAtEndOfDxe() as a no-op in both
VariableRuntimeDxe and VariableSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
The MorLockInit() and SetVariableCheckHandlerMor() functions have separate
implementations for VariableRuntimeDxe (= unprivileged, unified
DXE_RUNTIME driver) and VariableSmm (= privileged, DXE_SMM back-end of the
split variable driver).
Move their declarations from "Variable.c" to "PrivilegePolymorphic.h", so
that the compiler enforce that the declarations and the definitions match.
(All C source files with the call sites and the function definitions
already include "PrivilegePolymorphic.h" via "Variable.h".)
At the same time:
- replace two typos in the MorLockInit() description:
- replace "EFI_SUCEESS" with "EFI_SUCCESS",
- replace "MOR Lock Control" with "MOR Control Lock";
- in the SetVariableCheckHandlerMor() description:
- replace @param with @param[in],
- correct the description of the Attributes parameter (suggested by Star
Zeng <star.zeng@intel.com>),
- rewrap the comment to 80 columns.
This change cleans up commit 2f6aa774fe ("MdeModulePkg: Add MorLock to
variable driver.", 2016-01-19).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
If the platform supports SMM, a gRT->SetVariable() call at boot time
results in the following call tree to SecureBootHook():
RuntimeServiceSetVariable() [VariableSmmRuntimeDxe.c, unprivileged]
SmmVariableHandler() [VariableSmm.c, PRIVILEGED]
VariableServiceSetVariable() [Variable.c, PRIVILEGED]
SecureBootHook() [VariableSmm.c, PRIVILEGED]
//
// do nothing
//
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
And if the platform does not support SMM:
VariableServiceSetVariable() [Variable.c, unprivileged]
SecureBootHook() [Measurement.c, unprivileged]
//
// measure variable if it
// is related to SB policy
//
In other words, the measurement always happens outside of SMM.
Because there are two implementations of the SecureBootHook() API, one
that is called from SMM and does nothing, and another that is called
outside of SMM and measures variables, the function declaration should be
in a header file. This way the compiler can enforce that the function
declaration and all function definitions match.
"Variable.h" is used for "including common header files, defining internal
structures and functions used by Variable modules". Technically, we could
declare SecureBootHook() in "Variable.h". However, "Measurement.c" and
"VariableSmmRuntimeDxe.c" themselves do not include "Variable.h", and that
is likely intentional -- "Variable.h" exposes so much of the privileged
variable implementation that it is likely excluded from these C source
files on purpose.
Therefore introduce a new header file called "PrivilegePolymorphic.h".
"Variable.h" includes this header (so that all C source files that have
been allowed to see the variable internals learn about the new
SecureBootHook() declaration immediately). In "Measurement.c" and
"VariableSmmRuntimeDxe.c", include *only* the new header.
This change cleans up commit fa0737a839 ("MdeModulePkg Variable: Merge
from Auth Variable driver in SecurityPkg", 2015-07-01).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
EFI_BOOT_SCRIPT_WRITE() interface is a var-arg interface.
Spec defines the order of parameters for
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE as below:
typedef
EFI_STATUS
(EFIAPI *EFI_BOOT_SCRIPT_WRITE) (
IN CONST EFI_S3_SAVE_STATE_PROTOCOL *This,
IN UINT16 OpCode,
IN EFI_BOOT_SCRIPT_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
But implementation assumes Segment is in the very end, after Buffer.
Similar spec/implementation gaps are also found for
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE.
The patch fixes the implementation to extract the arguments in
correct order.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Commit 8932679df5 adds an ASSERT for
checking NULL pointer dereference.
The ASSERT added here is for addressing a false positive NULL pointer
dereference issue raised from static analysis.
This commit adds comments to clarify the reason for using ASSERT as the
check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=720
The current implementation assumes there is only one hotplug resource
padding for each resource type. It's not true considering
DegradeResource(): MEM64 resource could be degraded to MEM32
resource.
The patch treat the resource paddings using the same logic as
treating typical/actual resources and the total resource of a bridge
is set to the MAX of typical/actual resources and resource paddings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The debug messages can help developer to know the pre-memory
allocation usage.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=699
Within function AhciModeInitialization(), left shift operations of 'BIT0'
in the following statements:
"if ((PortImplementBitMap & (BIT0 << Port)) != 0) {"
will incur possible out of range left shift when Port is 31, since
"1 << 31" is possible to exceed the range of type 'int' (signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast 'BIT0' with UINT32 to resolve this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=698
Within function NetRandomInitSeed(), left shift a negative value is used
in:
"~Time.Hour << 24"
which involves undefined behavior.
Since Time.Hour is of type UINT8 (range from 0 to 23), hence ~Time.Hour
will be a negative value (of type int, signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit will remove the '~' operator before 'Time.Hour', since it
seems like an implementation choice for generating the seed.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=695
Within function CoreRestoreTpl(), left shift a negative value -2 is used
in:
"while (((-2 << NewTpl) & gEventPending) != 0) {"
which involves undefined behavior.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit refines the code logic to avoid left shifting the negative
value.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.
The patch defers the deletion of "BootNext" to before booting it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
In NetbufTrim() function, the NetBuf TotalSize should be checked with 0 before
making the trim operation, otherwise the function will fall into infinite loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The patch dynamically enables Bus Master on P2P bridges only
when requested by a device driver through PciIo.Attribute() to enable
the Bus Master.
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Within function GetAllocationDescriptorLsn():
The call to GetPdFromLongAd() may return NULL and it will be later
dereferenced in GetShortAdLsn().
This commit adds ASSERT to resolve the potential NULL pointer
dereference.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Do not reserve entire block device size for an UDF file system -
instead, reserve the appropriate space (UDF logical volume space) for
it.
Additionally, only create a logical partition for UDF logical volumes
that are currently supported by EDK2 UDF file system implementation. For
instance, an UDF volume with a single LVD and a single Physical (Type 1)
Partition will be supported.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add NULL pointer check before using a pointer to avoid possible
NULL pointer dereference.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Change since v4: Revise the patch based on V4 sent by Amit Kumar
1) Only return the corresponding protocol interface in *Interface
if the return status is EFI_SUCCESS or EFI_ALREADY_STARTED.
2) Interface is returned unmodified for all error conditions except
EFI_UNSUPPORTED and EFI_ALREADY_STARTED, NULL will be returned in
*Interface when EFI_UNSUPPORTED and Attributes is not
EFI_OPEN_PROTOCOL_TEST_PROTOCOL, the protocol interface will be
returned in *Interface when EFI_ALREADY_STARTED.
Change since v3:
1) Fixed issue when Attributes = EFI_OPEN_PROTOCOL_TEST_PROTOCOL
and Inteface = NULL case. [Reported by:star.zeng at intel.com]
Change Since v2:
1) Modified to use EFI_ERROR to get status code
Change since v1:
1) Fixed typo protocal to protocol
2) Fixed coding style
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Amit Kumar <amit.ak@samsung.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Gabriel Somlo <gsomlo@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Amit Kumar <amit.ak@samsung.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
For oneof/numeric/CheckBox(storage can be Bit VarStore)
If the question value can be updated and shown correctly
in UI page, we need do enhancements in following cases:
1. Parse the Ifr data to get the bit VarStore info correctly.
2. Set/get value to/from bit VarStore correctly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
For oneof/numeric/checkbox, their storage may be bit field.
When generating <ConfigAltResp> string to get default value
for these questions, we need to parse the Ifr data to get
the bit Varstore info,and then generating the correct
<ConfigAltResp> string.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=545
In UefiHiiLib, there are codes to validate the current setting of
questions, now update the logic to handle question with bit storage.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
From GCD perspective, its SetMemorySpaceAttributes() method doesn't accept page
related attributes. That means users cannot use it to change page attributes,
and have to turn to CPU arch protocol to do it, which is not be allowed by PI
spec.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Similar to the naming style for variables, it's better for the name of
members in a enum type to avoid using only upper-case letters.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The local GUID variable 'UdfDevPathGuid', it has been initialized during
its declaration.
For better coding style, this commit uses a global variable instead.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In ResolveSymlink(), replace the following variable:
CHAR16 *C;
with:
CHAR16 *Char;
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Case 1 - Within DuplicateFid() & DuplicateFe():
The call to AllocateCopyPool() may return NULL.
Add ASSERTs as checks.
Case 2 - Within UdfRead():
Add ASSERT to ensure 'NewFileEntryData' returned from FindFileEntry()
will not be NULL pointer.
Case 3 - Within GetAllocationDescriptorLsn():
The return value of 'GetPdFromLongAd (Volume, ParentIcb)' may be NULL,
and it will be passed into function GetShortAdLsn() which will
dereference it.
Add ASSERT in GetShortAdLsn() as check.
Case 4 - Within ReadFile():
Add ASSERT to ensure 'Data' returned from GetAedAdsData() will not be NULL
pointer.
Case 5 - Within InternalFindFile():
If both 'Parent->FileIdentifierDesc' and 'Icb' are NULL, then possible
NULL pointer dereference will happen in ReadDirectoryEntry().
Add additional check to resolve.
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Issue : When try to change serial attributes using sermode
command, the default values are set with the execute flow
as below.
The sermode command calls SerialSetAttributes, which sets H/W
attributes of Serial device. After that the SerialIo protocol is
reinstalled, which causes MdeModulePkg/Universal/Console/TerminalDxe
and MdeModulePkg/Universal/Console/ConPlatformDxe drivers' bindings
to stop and then start. This in turn calls SerialReset, which undoes
changes of SerialSetAttributes.
Cause : The SerialReset command resets the attributes' values
to default.
Fix : Serial Reset command should set the attributes which have
been changed by user after calling SerialSetAttributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The generic driver has no way to know whether an OEM type should
be filtered or not.
This patch is to update the code to skip measurement for OEM type
and platform code can measure it by self if required.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Update XHCI driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This IOMMU_PPI is to provide IOMMU abstraction in PEI.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=704
For root directory, the FID (File Identifier Descriptor) pointer is
accessible through PRIVATE_UDF_FILE_DATA.Root, whereas non-root
directory and regular files, their FIDs are accessible through
PRIVATE_UDF_FILE_DATA.File.
In UdfSetPosition(), the FID was retrieved through
PRIVATE_UDF_FILE_DATA.File, hence when calling it with a root directory,
PRIVATE_UDF_FILE_DATA.File.FileIdentifierDescriptor would be NULL and
then dereferenced.
This patch fixes the NULL pointer dereference by calling _FILE() to
transparently return the correct UDF_FILE_INFO * which points to a valid
FID descriptor of a specific file.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Steven Shi <steven.shi@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
VS2010/VS2012 build failure with below info:
warning C4701:
potentially uninitialized local variable 'DataOffset' used
potentially uninitialized local variable 'FilePosition' used
potentially uninitialized local variable 'FinishedSeeking' used
potentially uninitialized local variable 'Data' used
warning C4703:
potentially uninitialized local pointer variable 'Data' used
In fact, DataOffset, FilePosition and FinishedSeeking are initialized
and then used if (ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ).
DoFreeAed will be set to TRUE when Data is allocated and returned from
GetAedAdsData(), and Data will be freed if (DoFreeAed) when exiting.
Use same method at 5afa5b8159 to fix
the build failure.
There is related discussion at
https://lists.01.org/pipermail/edk2-devel/2017-September/014641.html
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
When building the driver for DEBUG/RELEASE, GCC48/GCC49 warn about
ReadFile() possibly using "BytesLeft" without initializing it first.
This is not the case. The reads of "BytesLeft" are only reachable if
(ReadFileInfo->Flags == READ_FILE_SEEK_AND_READ). But, in that case, we
also set "BytesLeft" to "ReadFileInfo->FileDataSize", near the top of the
function.
Assign "BytesLeft" zero at the top, and add a comment that conforms to the
pending Coding Style Spec feature request at
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
This issue was reported by Ard's and Gerd's CI systems independently.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
The ECMA-167 standard (3rd Edition, June 1997) reserves values 4 through 7
in the ICB.Flags[2:0] bit-field for future standardization; see "14.6 ICB
Tag" / "14.6.8 Flags (RBP 18)".
https://www.ecma-international.org/publications/standards/Ecma-167.htm
The
switch (RecordingFlags)
statement in the ReadFile() function handles all the standard values,
using the constants of the UDF_FE_RECORDING_FLAGS enum type. However, the
reserved values are not caught with a "default" case label, which both
breaks the edk2 Coding Style Spec, and leaves the Status variable
un-initialized, before we return Status under the Done label.
Set Status to EFI_UNSUPPORTED if we encounter a reserved value.
This issue was reported by Ard's and Gerd's CI systems independently
(through build failures with GCC48/GCC49, DEBUG/RELEASE targets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paulo Alcantara <pcacjr@zytor.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Ruiyu Ni
Wang Fan
Wang, Jian J
Star Zeng
Liming Gao
Jiaxin Wu
Fu Siyuan
chenc2
Laszlo Ersek
Heyi Guo
Zenith432
Hao Wu
Julien Grall
Michael D Kinney
Paulo Alcantara
Song, BinX
Dandan Bi
Ard Biesheuvel
Zhang, Chao B
Eric Dong
Amit Kumar
Pankaj Bansal
Jiewen Yao