Implement the First SMI Handler for hot-added CPUs, in NASM.
Add the interfacing C-language function that the SMM Monarch calls. This
function launches and coordinates SMBASE relocation for a hot-added CPU.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-13-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Once a hot-added CPU finishes the SMBASE relocation, we need to pen it in
a HLT loop. Add the NASM implementation (with just a handful of
instructions, but much documentation), and some C language helper
functions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-12-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Call QemuCpuhpCollectApicIds() in the root MMI handler. The APIC IDs of
the hotplugged CPUs will be used for several purposes in subsequent
patches.
For calling QemuCpuhpCollectApicIds(), pre-allocate both of its output
arrays "PluggedApicIds" and "ToUnplugApicIds" in the driver's entry point
function. The allocation size is dictated by the possible CPU count, which
we fetch from "CPU_HOT_PLUG_DATA.ArrayLength".
The CPU_HOT_PLUG_DATA structure in SMRAM is an out-of-band information
channel between this driver and PiSmmCpuDxeSmm, underlying
EFI_SMM_CPU_SERVICE_PROTOCOL.
In order to consume "CPU_HOT_PLUG_DATA.ArrayLength", extend the driver's
DEPEX to EFI_SMM_CPU_SERVICE_PROTOCOL. PiSmmCpuDxeSmm stores the address
of CPU_HOT_PLUG_DATA to "PcdCpuHotPlugDataAddress", before it produces
EFI_SMM_CPU_SERVICE_PROTOCOL.
Stash the protocol at once, as it will be needed later.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add a function that collects the APIC IDs of CPUs that have just been
hot-plugged, or are about to be hot-unplugged.
Pending events are only located and never cleared; QEMU's AML needs the
firmware to leave the status bits intact in the hotplug register block.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add a handful of simple functions for accessing QEMU's hotplug registers
more conveniently. These functions thinly wrap some of the registers
described in "docs/specs/acpi_cpu_hotplug.txt" in the QEMU tree. The
functions hang (by design) if they encounter an internal failure.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add a new SMM driver skeleton that registers a root SMI handler, and
checks if the SMI control value (written to 0xB2) indicates a CPU hotplug
SMI.
QEMU's ACPI payload will cause the OS to raise a broadcast SMI when a CPU
hotplug event occurs, namely by writing value 4 to IO Port 0xB2. In other
words, control value 4 is now allocated for this purpose; introduce the
ICH9_APM_CNT_CPU_HOTPLUG macro for it.
The standard identifiers in this driver use the new MM (Management Mode)
terminology from the PI spec, not the earlier SMM (System Management Mode)
terms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Laszlo Ersek