Change to use a different FILE_GUID to avoid using the
same GUID as the module in IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Change to use a different FILE_GUID to avoid using the
same GUID as the module in IntelFrameworkModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Count is initially 1 but is assigned to 2 in case PS2_READ_DATA_BYTE.
Though the state machine doesn't go back from PS2_READ_DATA_BYTE to
PS2_READ_BYTE_ONE (not a true bug), force assign Count to 1 to avoid
potential buffer overflow issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
MemoryInit uses the intrinsic memset function. To keep it pass build in VS
tool chain without source code change, /Oi option will be added.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Now that the PCI host bridge driver parses the DT node that describes
the PCI host bridge directly via the FDT client protocol, we can drop the
handling from VirtFdtDxe completely.
This means some PCI related PCDs are no longer set, such as PcdPciBusMin,
PcdPciBusMax, PcdPciIoBase, PcdPciIoSize, PcdPciIoTranslation,
PcdPciMmio32Base and PcdPciMmio32Size. Since these PCDs are specific to
ARM (and declared in ArmPlatformPkg), and not used anywhere else by the
ArmVirtPkg platforms, we can simply stop populating them, and drop all
references to them.
It also means that we can no longer rely on PcdPciDisableBusEnumeration
to be set before it is consumed by PciBusDxe and QemuFwCfgAcpiPlatformDxe,
so make those depend on FdtPciPcdProducerLib explicitly via NULL library
class resolution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate various dynamic PCDs with
information retrieved from the host-provided device tree, perform the
PCI ECAM related DT node parsing directly in PciHostBridgeDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make BaseCachingPciExpressLib depend on PciPcdProducerLib, so that we
have a chance to populate PcdPciExpressBaseAddress based on the contents
of the device tree.
Also update the platforms under ArmVirtPkg that support PCI to use the
special MAX_UINT64 value as the build time default for
PcdPciExpressBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library FdtPciPcdProducerLib which is intended to
be incorporated into modules that consume the PCI related dynamic PCDs
PcdPciExpressBaseAddress and PcdPciDisableBusEnumeration, either via NULL
library class resolution or via a direct dependency (for other libraries
or modules in ArmVirtPkg). This allows us to make them depend on the FDT
client protocol, and populate these PCDs based on the presence and the
contents of a 'pci-host-ecam-generic' DT node.
This also overloads the meaning of PcdPciExpressBaseAddress, which we will
set to MAX_UINT64 to signify that the actual values of these two PCDs have
not been assigned yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove the handling of the fw_cfg DT node from VirtFdtDxe now that the
fw_cfg client library has been moved to the FDT client protocol, and no
longer relies on VirtFdtDxe to pass this information via dynamic PCDs.
Since the PCDs in question are now no longer used, remove them from the
various DEC and DSC files as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make this library depend on the FDT client protocol to access the
host supplied device tree directly rather than depending on VirtFdtDxe
to set them using dynamic PCDs.
Since this library is used by several drivers (BdsDxe, SmbiosPlatformDxe,
SmbiosDxe and QemuFwCfgAcpiPlatformDxe), we will end up parsing the device
tree and the fwcfg node at least four times. However, no dynamic PCDs are
involved anymore, and will even be removed completely in a subsequent
patch. So the conversion is not optimal, but guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
By default, the ARM architectures have unsigned chars, whereas the other
architectures supported by EDK2 by default have signed chars.
However, EDK2 uses -funsigned-chars on those architectures to change the
default behaviour.
Unfortunately, the ARM architectures explicitly break their default
behaviour by specifying -fsigned-chars (I presume in a pre-emptive
attempt at avoiding incompatibility).
Since this situation is already confusing enough, switch the ARM
architectures to also specify -funsigned-chars explicitly rather than
just dropping the current parameter.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Build report add new report type 'HASH' to include the hash value for
each output EFI image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
VolInfo Tool add new option --hash to use openssl to generate hash value
for each PE image. If the image base address is not zero, we will rebase
its base address to zero before generate hash value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The timer code no longer relies on VirtFdtDxe to set the PCDs, so remove
the handling of the timer node and the references to those PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new dedicated ArmVirtTimerFdtClientLib to populate the
various timer related PCDs at driver load time rather than relying on
VirtFdtDxe to do it. Since ArmPkg/TimerDxe is the only consumer of these
PCDs, which is the DXE driver ArmVirtTimerFdtClientLib is intended to
complement, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a library ArmVirtTimerFdtClientLib which is intended to
be incorporated into TimerDxe via NULL library class resolution. This
allows us to make TimerDxe depend on the FDT client protocol, and
discover the timer interrupts from the device tree directly rather than
relying on VirtFdtDxe to set the dynamic PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The detection of the PSCI method has been moved to the EfiResetSystemLib
implementation, so drop the handling from VirtFdtDxe. Since no users
remain of gArmVirtTokenSpaceGuid.PcdArmPsciMethod, remove that as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to detect the PSCI method, move our
EfiResetSystemLib to the FDT client protocol to interrogate the device
tree directly.
Since this library is only consumed by EmbeddedPkg/ResetRuntimeDxe, and
considering that the PCD is no longer set, and even removed completely in a
subsequent patch, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that we moved the GIC discovery to our ArmGicArchLib implementation,
we can remove it from VirtFdtDxe, since it is no longer used. Remove the
PcdArmGicRevision declaration and definitions as well: VirtFdtDxe no longer
sets it, and no other drivers consume its value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of relying on VirtFdtDxe to populate the GIC related PCDs, move
this handling to our implementation of ArmGicArchLib, and retrieve the
required DT info using the new FDT client protocol.
This removes one of the reasons we need to load VirtFdtDxe first using
an 'A PRIORI' declaration in the platform FDF.
As Laszlo kindly confirms:
So, ultimately, the only user of this library instance is
"ArmPkg/Drivers/ArmGic/ArmGicDxe.inf". ... Indeed, checking the build
report file for ArmVirtQemu (AARCH64), I find ArmVirtGicArchLib (and
ArmGicLib too) only under "ArmPkg/Drivers/ArmGic/ArmGicDxe.inf".
which means that the constructor is only invoked once, and so the dynamic
PCDs are set in time for ArmGicDxe to consume them, and never afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add FdtClientDxe to the various platforms under ArmVirtPkg, so that the
drivers we will update to depend on the FDT client protocol in subsequent
patches will remain in working order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a new DXE driver FdtClientDxe to produce the FDT client
protocol based on a device tree image supplied by the virt host.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This introduces the FdtClientProtocol, which will be used to expose the
device tree provided by the host to other DXE drivers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* Short description:
The CpuIoServiceRead() and CpuIoServiceWrite() functions transfer data
between memory and IO ports with individual Io(Read|Write)(8|16|32)
function calls, each in an appropriately set up loop.
On the Ia32 and X64 platforms however, FIFO reads and writes can be
optimized, by coding them in assembly, and delegating the loop to the
CPU, with the REP prefix.
On KVM virtualization hosts, this difference has a huge performance
impact: if the loop is open-coded, then the virtual machine traps to the
hypervisor on every single UINT8 / UINT16 / UINT32 transfer, whereas
with the REP prefix, KVM can transfer up to a page of data per VM trap.
This is especially noticeable with IDE PIO transfers, where all the data
are squeezed through IO ports.
* Long description:
The RootBridgeIoIoRW() function in
PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c
used to have the exact same IO port acces optimization, dating back
verbatim to commit 1fd376d9792:
PcAtChipsetPkg/PciHostBridgeDxe: Improve KVM FIFO I/O read/write
performance
OvmfPkg cloned the "PcAtChipsetPkg/PciHostBridgeDxe" driver (for
unrelated reasons), and inherited the optimization from PcAtChipsetPkg.
The "PcAtChipsetPkg/PciHostBridgeDxe" driver was ultimately removed in
commit 111d79db47:
PcAtChipsetPkg/PciHostBridge: Remove PciHostBridge driver
and OvmfPkg too was rebased to the new core Pci Host Bridge Driver, in
commit 4014885ffd:
OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
This caused the optimization to go lost. Namely, the
RootBridgeIoIoRead() and RootBridgeIoIoWrite() functions in the new core
Pci Host Bridge Driver delegate IO port accesses to
EFI_CPU_IO2_PROTOCOL. And, in OvmfPkg (and likely most other Ia32 / X64
edk2 platforms), this protocol is provided by "UefiCpuPkg/CpuIo2Dxe",
which lacks the optimization.
Therefore, this patch ports the C source code logic from commit
1fd376d979 (see above) to "UefiCpuPkg/CpuIo2Dxe", plus it ports the
NASM-converted assembly helper functions from OvmfPkg commits
6026bf4600 and ace1d0517b65:
OvmfPkg PciHostBridgeDxe: Convert Ia32/IoFifo.asm to NASM
OvmfPkg PciHostBridgeDxe: Convert X64/IoFifo.asm to NASM
In order to support the MSFT and INTEL toolchains as well, the *.asm
files are ported from OvmfPkg as well, immediately from before the above
conversion (that is, at 6026bf460037^).
* Notes about the port:
- The write and read branches from commit 1fd376d979 are split to the
separate functions CpuIoServiceWrite() and CpuIoServiceRead().
- The EfiPciWidthUintXX constants are replaced with EfiCpuIoWidthUintXX.
- The cast expression "(UINTN) Address" is replaced with
"(UINTN)Address" (i.e., no space), because that's how the receiving
functions spell it as well.
- The labels in the switch statements are unindented by one level, to
match the edk2 coding style (and the rest of UefiCpuPkg) better.
* The first signoff belongs to Jordan, because he authored all of
1fd376d979, 6026bf4600 and ace1d0517b.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://www.redhat.com/archives/vfio-users/2016-April/msg00029.html
Reported-by: Mark <kram321@gmail.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/10424/focus=10432
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Mark <kram321@gmail.com>
Tested-by: Mark <kram321@gmail.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If EDK_TOOLS_PATH is set, then not set it again.
If EDK_TOOLS_PATH is not set, then set it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
gEfiPs2PolicyProtocolGuid and PcdFastPS2Detection was missed when
resolving the conflict.
Check in the two definition to MdeModulePkg.dec to fix build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If ApLoopMode is set to ApInMwaitLoop, AP will be placed into C-State by mwait
instruction. BSP will wakeup AP by write start-up signal in monitor address.
However, AP maybe waken by SMI/NMI/MCE and other condition. On this case, AP
will check if BSP wants to wakeup itself really. If not, AP will continue to
execute mwait to C-State.
One potential issue: BSP may not recognize AP was wakeup from C-State by other
event and BSP still writes start-up signal to wakeup AP. But AP does not aware
it and still execute mwait instruction to C-State. So, AP cannot be wakeup on
this case.
This fix is let AP to clear start-up signal when it really is wakeup to execute
AP function. And BSP will write start-up signal till AP clears it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch updates the HTTP Boot driver to support the download and boot
a RAM disk image from HTTP server.
The HTTP RAM disk boot is described in section 23.7 "HTTP Boot" in
UEFI 2.6. HTTP server could provide either an UEFI image or a RAM disk image
for the HTTP boot client to use. The RAM disk image must contain a UEFI
compliant file system in it.
HTTP boot driver will identify the image type either by the "Content-Type"
entity header filed or by the file name extension as below:
"application/efi" or *.efi -> EFI Image
*.iso -> CD/DVD Image
*.img -> Virtual Disk Image
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Add 2 macros inNetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number.
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
v2:
*refine some codes
Add 2 macros in NetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Not build tested
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Build tested with GCC 5.3 on IA32 and X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Build tested with GCC 5.3 with both IA32 and X64. Unfortunately both
seemed to hang very early when boot tested on QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Redfine the BmIsValidLoadOptionVariableName function to allow public use. Change name to EfiBootManagerIsValidLoadOptionVariableName to match naming scheme. Check that VariableName is never NULL and allow OptionType and OptionNumber to be optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Remove /Oi from Visual Studio tool chains. because of the following reasons:
1. Intrinsic is Compiler-dependent.
2. Adding /Oi (Generate Intrinsic Functions) doesn't promise 100% replacing
the function call with inline functions.
/Oi is only a request, but doesn't force, the compilers to use the intrinsic.
The visual studio optimizer can still use the library version.
3. Since EDK2 doesn't include Visual Studio header files, intrinsic function
should not be used.
Built Nt32Pkg, OvmfPkg, ShellPkg, MdeModulePkg and CryptoPkg successfully.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Ruiyu Ni
Liming Gao
Hao Wu
Qiu, Shumin
Ard Biesheuvel
Leif Lindholm
Yonghong Zhu
Laszlo Ersek
Jeff Fan
Fu Siyuan
Star Zeng
Zhang Lubo
Jordan Justen
Thomas Palmer
Cinnamon Shia
Eric Dong