Juno has several serial ports, one of which may be used for a remote
debug interface (e.g. gdb, WinDbg). The debug serial port needs to
be distinct from that used for UEFI trace to prevent corruption of
debugger protocol messaging.
The UEFI spec requires that serial devices be initialised to default
settings. (11.8 Serial I/O Protocol - "The default attributes for all
UART-style serial device interfaces are: 115,200 baud, ..."
and 17.3.3 EFI Debugport Variable - "These defaults must be used in the
absence of a DEBUGPORT variable...")
This change adds initialization of the serial device reported in the
ACPI DBG2 table. The initialisation is done early in the boot to allow
the possibility of remote debug of UEFI itself.
NOTE: This is functionally dependent on the DBG2 table being updated in
OpenPlatformPkg, but is required as a precursor to that change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When we have intermittent loss of packets, ping command doesnt
return to Shell prompt. It keeps looping in the while (Status
==EFI_NOT_READY) since Private->RxCount will never reach
Private->SendNum. Addresses the issue with the use of a new varibale
in the PRIVATE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This introduces a special version of ArmMmuLib for PEIMs that takes care
only to perform cache maintenance on the live entry replacement routine
if the module is not executing in place. Not only is such cache maintenance
unnecessary in that case, it may be actively harmful on some systems that
fail to tolerate cache maintenance operations on NOR flash regions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This base library encapsulates the MMU manipulation routines that have been
factored out of ArmLib. The functionality covers initial creation of the 1:1
mapping in the page tables, and remapping regions to change permissions or
cacheability attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Introduce the library class ArmMmuLib, which encapsulates the functionality
to set up and modify page table entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The LegacyBootMaintUiLib depends on the LegacyBootManagerLib to realize its
functionality, the LegacyBootManagerLib may initialize after
LegacyBootMaintUiLib, so the functionality of LegacyBootMaintUiLib may
be incorrect. Now we fix this issue by executing the related codes when
opening the legacy forminstead in its the constructor function. Because
when opening the legacy form, the LegacyBootManagerLib must have been
initialized.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BootMaintenanceManagerUiLib depend on the LeagcyBootMaintUiLib to show the
legacy menus. So we need to do the actions related to LegacyUi in BMM
after the LeagcyBootMaintUiLib have been initialized. So now : 1). update
menus (including legacy menus), 2) re-scan boot options (including legacy
boot option) when opening the BMM form. We think when opening BMM form,
the LeagcyBootMaintUiLib must have been initialized.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
HiiConfigRoutingRouteConfig function returns 'Progress' to indicate
the failure info in the ConfigResp string. But when fail to route the
ConfigResp for EfiVarStore, it doesn't return the correct failure info.
Now this patch is to fix this issue and add debug info let user know the
reason of failure.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
The patch re-orders the sequences by putting updating memory type
information before loading the boot option so that the reserved
memory usage by HTTP RAM disk boot can be excluded by the memory
type information updating.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
IP4_CONFIG2_INSTANCE->DataItem is used to save the configuration
data to NV variable. When the policy is changed from static to
DHCP, DnsServers info will be cleaned from DataItem first
(See Ip4Config2SetPolicy), it's correct because DnsServers info
should not be saved to NV variable.
But if there is any DnsServers info received from DHCP message, it
will be reset to DataItem again (See Ip4Config2SetDnsServerWorker),
which may cause the NV variable contain the DnsServers info while
the policy is DHCP (See Ip4Config2WriteConfigData).
Then, while the platform is reset, the issue happened. Because
Ip4Config2DataTypeDnsServer is set under DHCP policy, which is not
allowed by UEFI Spec and error returned.
This patch is used to resolve this potential issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Since Shumin has left Intel to pursue a better job, I will temporary
be on his position to maintain ShellPkg and ShellBinPkg with Jaben.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
ACPI 6.0 added a processor efficiency field and 3 reserved bytes at the
end of the GICC structure so add a new macro to initialise the new
field.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The AllocateCopyPool in function ExtractFileNameFromDevicePath
may return NULL, so need to do error handling. This patch is to
add error handling codes for function ExtractFileNameFromDevicePath
and its caller functions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxe4BcDxe.lib(PxeBcDhcp.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 1659 in file
MdeModulePkg/Universal/Network/UefiPxeBcDxe/PxeBcDhcp.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This is a enhancement to support the case when platform firmware
doesn't support Boot Manager Menu. For now, if BootManagerMenu FFS
can not be retrieved from FV, BDS core code will still register a
boot option for it. Then, this non-functional boot option will
still be booted by user's request (like HotKey or Exit from shell)
to cause additional boot time and error status code reported.
Therefore, it would be good to skip BootManagerMenu boot option
registration and then return error status and Invalid BootOption
data for this case so that the BootManagerBoot() or other consumers
can directly return without doing anything.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current MemoryProfileSymbolGen.py assumes the rva is 32bits,
the patch is to remove the restriction to match any lengths
of rva.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
when we use the ping6 command without configuring the network
interface, it should give correct prompt to users.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Build spec mentions $(FAMILY) macro be used in DSC/FDF to specify the tool
chain family, like GCC, MSFT. This patch add the support for this macro.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Code logic ensures that both pointers 'DriverInfoData' and 'AllocInfoData'
will not be NULL when they are used.
Add ASSERTs as warning for cases that will not happen.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
SErrors (formerly called asynchronous aborts) are a distinct class of
exceptions that are not closely tied to the currently executing
instruction. Since execution may be able to proceed in such a condition,
this class of exception is masked by default, and software needs to unmask
it explicitly if it is prepared to handle such exceptions.
On DEBUG builds, we are well equipped to report the CPU context to the user
and it makes sense to report an SError as soon as it occurs rather than to
wait for the OS to take it when it unmasks them, especially since the current
arm64/Linux implementation simply panics in that case. So unmask them when
ArmCpuDxe loads.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Putting DEBUG () code after an ASSERT (FALSE) statement is not very
useful, since the code will be unreachable on DEBUG builds and compiled
out on RELEASE builds. So move the ASSERT () statement after it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
A number of code locations use
ASSERT_EFI_ERROR (BooleanExpression)
instead of
ASSERT (BooleanExpression)
Fix them.
Cc: David Wei <david.wei@intel.com>
Cc: Tim He <tim.he@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: David Wei <david.wei@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
This change is to avoid UEFI SCT failure as UEFI SCT has no knowledge
about how to accessing a EMMC RPMB partition.
The user needs to access RPMB partition should get access through
EFI_SD_MMC_PASS_THRU protocol with authentication key & mac.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
We have to upgrade the TPL level used by SdMmc stack because the
following flow:
DiskIo2ReadWriteDisk() in logical partition -> PartitionReadBlocksEx()
in logical partition at TPL callback level -> ProbeMediaStatusEx()
with sync request -> DiskIo2ReadWriteDisk() in physical partition ->
waiting for async task completion.
if the low layer driver doesn't run at TPL_NOTIFY level, it will have
no time to trigger async task and cause system hang.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
SubmitCommand() was checking the buffer size for ">=" Max size. This would
cause code to fail with "EFI_INVALID_PARAMETER" if a buffer was passed
that was the "max" size as indicated by the GetCapability() command.
Change to ">" to allow for maximum buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bret Barkelew <brbarkel@microsoft.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This tool depends on DIA2Dump.exe (VS) or nm (gcc) to parse debug entry.
Usage: MemoryProfileSymbolGen.py [--version] [-h] [--help] [-i inputfile
[-o outputfile]]
Copyright (c) 2016, Intel Corporation. All rights reserved.
Options:
--version show program's version number and exit
-h, --help show this help message and exit
-i INPUTFILENAME, --inputfile=INPUTFILENAME
The input memory profile info file output from
MemoryProfileInfo application in MdeModulePkg
-o OUTPUTFILENAME, --outputfile=OUTPUTFILENAME
The output memory profile info file with symbol,
MemoryProfileInfoSymbol.txt will be used if it is not
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Provides services to record memory profile of multilevel caller.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. Produce SMM memory profile protocol.
2. Consume PcdMemoryProfilePropertyMask to support disable recording
at the start.
3. Consume PcdMemoryProfileDriverPath to control which drivers need
memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. Implement include GetRecordingState/SetRecordingState/Record for
memory profile protocol.
2. Consume PcdMemoryProfilePropertyMask to support disable recording
at the start.
3. Consume PcdMemoryProfileDriverPath to control which drivers need
memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current memory profile feature:
1. Shows which line of code calls gBS->AllocateXXX(). But most entries
are from MemoryAllocationLib.
2. Records at the start.
3. Records all modules.
Enhanced memory profile feature:
1. User can know which line of code calls AllocateXXX() API instead of
gBS->Allocate().
2. User can know which line of code calls a specific API that will call
AllocateXXX().
3. User can know total memory allocated by a specific line of code.
4. User can configure to record single module.
5. User can configure when to enable recording.
6. User can know RVA<->Symbol (Function, Source, Line).
For the enhanced memory profile feature,
1. Extend MEMORY_PROFILE_DRIVER_INFO to include PdbString.
2. Extend MEMORY_PROFILE_ALLOC_INFO to include ActionString.
3. Extend MEMORY_PROFILE_ACTION to indicate action in memory allocation
lib and user defined action.
4. Extend memory profile protocol to include GetRecordingState/
SetRecordingState/Record.
5. Define SMM memory profile protocol.
6. Extend PcdMemoryProfilePropertyMask to support disable recording at
the start.
7. Introduce new PCD PcdMemoryProfileDriverPath to control which drivers
need memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
PI specification Vol 4 - SMM does not have any limitation of BASE_4GB for SMM.
So we should replace BASE_4GB check with MAX_ADDRESS check to make sure
the SMM memory is accessible by SMM Core.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Possible NULL pointer dereference for FspmHeaderPtr/FspsHeaderPtr in
module FspmWrapperPeim/FspsWrapperPeim.
Add error handling codes to avoid this issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
A number of code locations use
ASSERT_EFI_ERROR (BooleanExpression)
instead of
ASSERT (BooleanExpression)
Fix them.
Cc: David Wei <david.wei@intel.com>
Cc: Tim He <tim.he@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
A number of code locations use
ASSERT_EFI_ERROR (BooleanExpression)
instead of
ASSERT (BooleanExpression)
Fix them.
Cc: Jeff Fan <jeff.fan@intel.com>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
When ASSERT_EFI_ERROR() is compiled out, dependent on build flags, only
the status checking should be removed; the function calls should stay.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Mudusuru, Giri P
Evan Lloyd
Subramanian, Sriram (EG Servers Platform SW)
Ard Biesheuvel
Dandan Bi
Ruiyu Ni
Jiaxin Wu
Thomas Palmer
Graeme Gregory
Bi, Dandan
Hao Wu
Sunny Wang
Star Zeng
Zhang Lubo
Yonghong Zhu
david wei
Laszlo Ersek
Feng Tian
Zhang, Chao B
Jiewen Yao