In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
According to RFC 3720, the TargetAddress provided in a redirection
might be a DNS host name, a dotted-decimal IPv4 address, or a
bracketed IPv6 address. Current ISCSI driver in Networkpkg only
supports dotted-decimal IPv4 address, so we need add IPv6 address
support since it is a combo driver supporting dual stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
There may be an error happens when we use the
configure function to set or change the configuration
data for the DNS6 instance, So we will free the
DnsServerList without configured to NULL. If we reset
the instance with the parameter DnsConfigData to NULL, the
DnsServerList will be freed twice.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The BootFileURL option (59) in dhcpv6 is used to deliver
the next server address with bootfile name, as an example
"tftp://[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]/BOOTFILE_NAME;
mode=octet", it can also be “tftp://domain_name/BOOTFILE_NAME;
mode=octet”, this patch is to support this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT
once redirection occurs, which removes the possibility of the OS
to reconnect to the configured IP for load balancing. The behavior
is not explicitly described in IBFT spec, though the MSFT expert
confirm we should record original user setting rather than
publish the redirected IP.
Thanks Sriram for reviewing and validating this patch in his test-bed.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
The previous DNS server data will be retained after the policy
changes from Auto to Manual. This patch is used to clean the
previous dhcp configuration data.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
When HostNameToIp() and GeneralLookUp() are called with a invalid
host name, RCODE (4 bit field is set as part of responses) error
will returned in packet to identify the domain name referenced in
the query does not exist. So, EFI_NOT_FOUND should be returned
directly.
Current implementation only check the RCODE in successful condition.
Need update the code for more error check according to RFC 1035 4.1.1
section.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
v2:
* Code refine.
* For DnsCache, the minimum value of TTL is selected between CNAME and A/AAAA record.
According RFC 1034 - 3.6.2, if the query name is an alias, the name server
will include the CNAME record in the response and restart the query at the
domain name specified in the data field of the CNAME record. RFC also provides
one example server action when A query received:
Suppose a name server was processing a query with for USCISIC.ARPA, asking for
type A information, and had the following resource records:
USC-ISIC.ARPA IN CNAME C.ISI.EDU
C.ISI.EDU IN A 10.0.0.52
Both of these RRs would be returned in the response to the type A query.
Currently, DnsDxe driver doesn't handle the CNAME type response, which will cause
any exception result. The driver need continue the packet parsing while CNAME type
record parsed. So, this patch is used to handle it correctly.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
This path made the following update:
* Generate SPI randomly.
* Correct IKE_SPI_BASE value according RFC 4302/4303.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
*v2: update the commit log and refine the code comments.
There are three kinds of IKE Exchange process:
#1. Initial Exchange
#2. CREATE_CHILD_SA_Exchange
#3. Information Exchange
The IKE header "FLAG" update is incorrect in #2 and #3 exchange,
which may cause the continue session failure. This patch is used
to correct the updates of IKE header "FLAG" according the RFC4306
section 3.1.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
*v2: update the commit log.
IKE Initial Exchange message should cover below process:
Initiator Responder
Message1 HDR,SAil,KEi,Ni ------>
Message2 <------ HDR,SArl,KEr,Nr,[CERTREQ]
Message3 HDR,SK{} ------>
Message4 <------ HDR,SK{}
If Initial Exchange message is initiated by Linux IKE, it works well.
But the failure will happen if it's initiated by UEFI IKE. This issue
is caused by the no status check of NotifyCookiePayload.
While parsing the IKEv2 packet for IKE_SA_INIT exchange, if the packet
doesn't contain COOKIE Notify payload, EFI_INVALID_PARAMETER will be
returned from Ikev2ParserNotifyCookiePayload(). Current implementation
return this error status directly, then the session will be broken. The
correct behavior should check this status. If no COOKIE Notify payload,
initiator don't need to retry the IKE_SA_INIT.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the AttemptConfig structure
will be freed, but the mCallbackInfo->Current is not
configured as null and this pointer will be used again in
IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
The UefiPxeBcDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
UefiPxeBcDxe.lib(PxeBcBoot.obj) : error LNK2001: unresolved external
symbol __allmul
The cause is line 148 in file NetworkPkg\UefiPxeBcDxe\PxeBcBoot.c. The
third parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IScsiDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
IScsiDxe.lib(IScsiProto.obj) : error LNK2001: unresolved external symbol
__allmul
The cause is line 141 in file NetworkPkg\IScsiDxe\IScsiProto.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The size of the ClassIdentifier is apparently wrong in the structure. In my
testing it caused the vendor class data to be displayed as bogus
"HTTPClient:Arch00016x:UNDI00300". After correcting the size the vendor class
data is "HTTPClient:Arch00016:UNDI003000" which looks good to me.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Consider the situation as shown in below chart. The last ACK message has
acknowledged the Tcb->RcvWl2, and all the segments until Tcb->RcvNxt have
been received by TCP driver. The Tcb->RcvNxt is not acknowledged due to the
delayed ACK. In this case an incoming segment (Seg->Seq, Seg->End) should
not be accepted by TCP driver, and an immediate ACK is required.
Current TcpSeqAcceptable() thought it’s an acceptable segment incorrectly, it
continues the TcpInput() process instead of sending out an ACK and droping the
segment immediately.
Tcb->RcvWl2 Tcb->RcvNxt Tcb->RcvWl2 + Tcb->RcvWnd
Seg->Seq Seg->End | |
| | | | |
---+-----+---------------+-------------+--------------------------+-----------
<income segment> <----Acceptable Range--- -->
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Eugene Cohen <eugene@hp.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
The bug existed in replacing AsciiStrToUnicodeStr with AsciiStrToUnicodeStrS,
since MacString now is a pointer, the value sizeof(MacString)/sizeof (MacString[0])
is not correct here as the third parameter.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
After boot image has been downloaded, the HTTP boot driver leaves the service
in the started state, with an active TCP child. This may cause some problems:
1. The HTTP session may become unavaiable after a while, then a following HTTP
Boot will fail.
2. An active TCP child will send RST to any incoming TCP message, which may
break other driver which tries to setup a TCP connection.
The HTTP boot driver doesn't provide any interface to the boot loader, so it's
unnecessary to keep the service running after a boot image is downloaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
The commit of 6b16c9e7 removes ASSERT and use error handling
in IpSecDxe driver, but may cause the potential NULL pointer
dereference. So, this patch is used to avoid NULL pointer
dereference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
v2:
*Since we have redefined the name of arch types in Dhcp.h for http boot,
it need to change corresponding codes.
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*Fix some memory leak issue.
This patch is used to replace ASSERT with error handling in Http boot
Driver and IScsi driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Use goto to simplify code logic.
This patch is used to replace ASSERT with error handling in
DnsDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is used to refine the code by removing ASSERT and
using error handling in IpSecDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
This patch is used to fix unspecified address use case in
ConstructSpdIndexer() function. Indexer->Name for
ConstructSpdIndexer is unspecified, that will be a problem
for UnicodeStrToAsciiStr.
This patch also refine the code by removing ASSERT and user
error handling.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
QClass value may be not equal to 1(DNS_CLASS_INET) when
GeneralLookUp query is called. So, remove QClass value check.
Moreover, the 'Identification' and 'Type' filed in Query packet
should not be changed to little endian since the packet maybe
retransmitted while there is any error happened.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
TokenEntry should be removed from Token list before freed.
Otherwise, invalid TokenEntry will be existed in Token list.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is used to fix HTTP IPv6 boot failure in diff net segment
issue. IPv6 gateway address should be registered before DNS query,
otherwise, DNS query will fail.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
This patch is used to handle timeout case when downloading
the message. The Status in the token should also be checked
to handle any response error case including timeout case.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Remove timeout check for http body message receive. It should be handled
in HttpBootDxe driver for http response unblocking implementation. After
timeout removed, the Wrap date should not be freed immediately. Only the
TCP CompletionToken in Wrap date is canceled or signaled, the Wrap date
could be freed.
In addition, Http cancel token is also incorrect. Tcp Cancel should be called
to cancel TCP CompletionToken in Wrap date before close it directly. Otherwise,
some exception behavior may happened.
This patch also refine the coding style for HttpDxe driver.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
This path is used to support TCP Cancel function to abort an
asynchronous connection, listen, transmission or receive request.
If any TCP CompletionToken is not signaled, it should not be closed
directly by calling CloseEvent (Still in the TCP TokenList). If not,
any exception behavior may be triggered. We should cancel it by calling
Tcp->Cancel() first. In such a case, TCP Cancel function is
necessary.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
In Ip6CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This patch updates the HTTP driver to initialize the local variable for NULL
and check the NULL pointer before dereference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The HTTP Token Wrap is created in EfiHttpResponse() and then passed
to the deferred Receive event callback, HttpTcpReceiveNotifyDpc.
HttpTcpReceiveHeader and HttpTcpReceiveBody use a Tcp polling loop to
monitor the socket status and trigger the Receive event when a new
packet arrives. The Receive event brings up HttpTcpReceiveNotifyDpc
to process the HTTP message and the function will set Wrap->TcpWrap.IsRxDone
to TRUE to break the Tcp polling loop.
However, HttpTcpReceiveNotifyDpc mistakenly freed Wrap, so the Tcp
polling loop was actually checking a dead variable, and this led the
system into an unstable status.
Given the fact that the HTTP Token Wrap will be freed in EfiHttpResponse
or HttpResponseWorker, this commit removes every "FreePool (Wrap)" in
HttpTcpReceiveNotifyDpc.
v2:
* Free Wrap after HttpTcpReceiveBody returns normally.
Cc: "Wu, Jiaxin" <jiaxin.wu@intel.com>
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "El-Haj-Mahmoud, Samer" <samer.el-haj-mahmoud@hpe.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Hegde, Nagaraj P" <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
SockProcessRcvToken only returns the number of the received bytes, not
an EFI Status.
Cc: "Siyuan Fu" <siyuan.fu@intel.com>
Cc: "Jiaxin Wu" <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Laszlo Ersek
Zhang Lubo
Gary Lin
Jiaxin Wu
Ye Ting
Fu Siyuan
Hao Wu
Michael Chang
Giri P Mudusuru
Star Zeng
Fu, Siyuan