Port the DSC file changes from the similarly titled OvmfPkg patch in this
series to ArmVirtPkg.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit e069278905.
The default value for PcdAcpiExposedTableVersions is now set to 0x20
for Aarch64 systems. Setting this PCD in ArmVirtPkg/ArmVirtQemu.dsc
is no longer necessary.
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable support for NVMe storage in ArmVirtQemu/QemVirtQemuKernel in order
to simplify booting/installing operating systems that don't support
virtio.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the QEMU loader DXE driver and client library to the build for
our QEMU targeted implementations in ArmVirtPkg.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that all the TPM2 related plumbing is in place, we can add the
final piece that performs the measurements of loaded images into
the appropriate PCRs.
This patch ports commit d5a002aba0 ("OvmfPkg: plug
DxeTpm2MeasureBootLib into SecurityStubDxe", 2018-03-09) to ArmVirtQemu.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the DXE phase component that publishes the HII pages and
associated logic to enable TPM2 parameters to be configured by
the user via the setup menu.
This patch ports (parts of) the following commits to ArmVirtQemu:
- 3103389043 ("OvmfPkg: Add TCG2 Configuration menu to the Device
Manager menu", 2019-02-11)
- cf3ad972a2 ("OvmfPkg: reorganize TPM2 support in DSC/FDF files",
2020-01-09)
- f55477fe2d ("OvmfPkg: use HII type PCDs for TPM2 config related
variables", 2020-01-09)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the TPM2 support module in the DXE phase, and the associated
libraries and PCDs that it requires. This will be wired into the
measured boot support code in a subsequent patch.
Note that Tcg2Dxe.inf is added to ArmVirtQemuFvMain.fdf.inc, which
is shared with other platforms in ArmVirtPkg, but as those will not
set the TPM2_ENABLE define, this change does not affect them.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module", 2018-03-09)
- b9777bb42e ("OvmfPkg: add Tcg2PhysicalPresenceLibQemu", 2018-05-22)
-- only to match OVMF's current lib class resolutions
- 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib if and only if
TPM2_ENABLE", 2019-07-04)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of conditializing the choice of resolution based on
TPM2_ENABLE for ArmVirtQemu, move the TpmMeasurementLib out of the
shared .DSC include and into the individual DSCs.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Incorporate the PEI components and the associated library class
resolutions and PCD declarations to enable TPM2 support in the
PEI phase.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei clone",
2018-03-09)
- 4672a48928 ("OvmfPkg: include Tcg2Pei module", 2018-03-09)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so
that the TPM init code adopts the currently active PCR banks as
the ones that are enabled by default.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a first step in gradually adding TPM2 support to ArmVirtQemu, add
the TPM2_ENABLE configurable to the [Defines] section, and if it is
set, add the ResetSystem PEIM to the build, along with the library
class references that we will need to support it:
- wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself,
which will be in charge of performing the actual reset
- add PeiResetSystemLib as the common ResetSystemLib resolution for
PEIM class modules, so that other PEIMs will invoke the PPI
published by the ResetSystem PEIM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Port the [LibraryClasses], [PcdsFixedAtBuild] and [Components] settings
that are related to NETWORK_TLS_ENABLE from OvmfPkg to ArmVirtPkg.
ArmVirtXen is not modified because it doesn't include the edk2 network
stack.
(This change is now simpler than it would have been when TianoCore#1009
was originally filed, due to ArmVirtPkg consuming the NetworkPkg include
fragments meanwhile, from TianoCore#1293 / commit 157a3b1aa50f.)
The usage hints from "OvmfPkg/README", section "HTTPS Boot", apply.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Guillaume GARDET <guillaume.gardet@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1009
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guillaume Gardet <guillaume.gardet@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:Add check for NETWORK_SNP_ENABLE and NETWORK_TLS_ENABLE.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-4-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
[lersek@redhat.com: undo spurious whitespace changes]
[lersek@redhat.com: clarify SNP and TLS rejection messages]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Having removed VALID_ARCHITECTURES from
"OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.inf", it now makes sense to
reflect the related platform DSC bits from OvmfPkg to ArmVirtPkg.
Build "EnrollDefaultKeys.efi" as part of ArmVirtQemu and ArmVirtQemuKernel
(which are the ArmVirtPkg platforms that include SecureBootConfigDxe too).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.
In commit 59541d4163, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:
(1) Include the ReportStatusCodeRouterRuntimeDxe driver.
This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
runtime modules to report (produce) status codes. The latter allows
the same types of modules to register callbacks for status code
handling (consumption).
(Handler registration occurs only at boot time. Status codes are
delivered to each handler at runtime as well, unless the handler is
unregistered at ExitBootServices().)
(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
modules only. This way DXE_DRIVER modules that use the
REPORT_STATUS_CODE_EX() macro and friends will reach
EFI_STATUS_CODE_PROTOCOL from point (1).
(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
This causes the REPORT_STATUS_CODE_EX() macro and friends to let
Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
Debug Codes (bit#2) are filtered out.
(4) Include no driver, for now, that registers any status code handler via
EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
ReportStatusCodeRouterRuntimeDxe will be thrown away.
(5) Modify only the ArmVirtQemu* platforms. A status code handler will
be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
and this library instance is not consumed by ArmVirtXen.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-1}
(6 builds in total), PcdOptionRomImageVerificationPolicy,
PcdFixedMediaImageVerificationPolicy, and
PcdRemovableMediaImageVerificationPolicy are not used in any of those
builds.
Restrict the settings to the ArmVirtQemu and ArmVirtQemuKernel platforms
(preserving the -D SECURE_BOOT_ENABLE restriction in the process).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Restrict the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
Restrict the TTY_TERMINAL define similarly.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds.
Move the setting from "ArmVirt.dsc.inc" to "ArmVirtQemu.dsc", to reflect
reality.
We originally moved the PCD setting in the opposite direction in commit
8aab575c26 ("ArmVirtPkg: enable non-executable DXE stack for all
platforms", 2017-03-07), generalizing it. However, as the comment itself
states, and according to all 36 ArmVirt build reports:
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
the PCD is only consumed by "MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf", and
that module is only included in the ArmVirtQemu platform.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PcdPrePiCpuMemorySize is no longer used so drop the PCD overrides
from all platform descriptions in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the IPv6 stack to ArmVirtQemu with a cumulative port of the following
OvmfPkg commits:
* 36c6413f76 "OvmfPkg: enable the IPv6 support", 2014-12-19
* 96302b80d9 "OvmfPkg: Enable Network2 Shell Commands for IPv6",
2016-03-08
* 6d0f8941bd "OvmfPkg: always resolve OpenSslLib, IntrinsicLib and
BaseCryptLib", 2017-01-17
* 32e22f20c9 "OvmfPkg: correct the IScsiDxe module included for the IPv6
stack", 2017-01-17
The IPv6-enabled IScsiDxe driver depends on BaseCryptLib, and the
"CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf" instance depends on
IntrinsicLib and OpensslLib. This is why commit 6d0f8941bd is relevant.
However, unlike in OvmfPkg, in ArmVirtPkg we'll precisely track the
firmware features that require these library classes. (The OvmfPkg
discussion was quite complex, and the OvmfPkg solution was a compromise:
<http://mid.mail-archive.com/1484569332-13440-1-git-send-email-jiaxin.wu@intel.com>.)
The ArmVirtXen platform is not extended with the relevant drivers because
currently it doesn't include any networking support.
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1007
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Port OvmfPkg commit 5c3481b0b6 to ArmVirtPkg. Some explanation should
be in order (because 5c3481b0b6 doesn't offer any):
- The UefiDevicePathLibDevicePathProtocol instance uses the Device Path
Utilities Protocol, produced by DevicePathDxe, for formatting and
parsing the textual device path representation. This allows for a
lighter weight lib instance that gets linked into several DXE modules.
In comparison, the more standalone UefiDevicePathLib instance includes
the formatting and parsing routines in every client module.
- The DXE core needs DevicePathLib before it dispatches DevicePathDxe, so
it needs to stick with the standalone instance.
- DevicePathDxe itself also needs the standalone instance, for
implementing the protocol.
- The DXE-phase PCD driver, "MdeModulePkg/Universal/PCD/Dxe/Pcd.inf",
depends on DevicePathLib via UefiLib and DxeServicesLib at the least; so
with this update, it inherits a dependency on the protocol. In reverse,
DevicePathDxe depends on the PCD Protocol, via PcdLib. The cycle is
broken by using BasePcdLibNull in DevicePathDxe. That restricts it to
FixedAtBuild, Patch, and FeatureFlag PCDs, but that's fine.
Example space savings (using ArmVirtQemu and the GCC5 toolchain):
- NOOPT: 187KB in FVMAIN, 12KB in FVMAIN_COMPACT
- DEBUG: 147KB in FVMAIN, 20KB in FVMAIN_COMPACT
- RELEASE: 123KB in FVMAIN, 17KB in FVMAIN_COMPACT
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=940
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In spite of both ArmVirtQemu and ArmVirtQemuKernel formatting the variable
store template at build time, link NvVarStoreFormattedLib into
VariableRuntimeDxe via NULL class resolution on both platforms. This lets
us test the depexes implemented in the previous patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In order to allow the ArmVirtPkg platforms to be built using the
NOOPT target, add it explicitly to the BUILD_TARGETS define.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new ArmVirtMemInfoLib library to retrieve DRAM information
from the platform, so that we can phase out ArmPlatformLib going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The QemuVirtMemInfoLib ArmVirtMemInfoLib implementation created for
ArmVirtQemuKernel does exactly what we need for ArmVirtQemu, the only
difference being that the latter is PrePeiCore based, and so it uses
a different method to ensure that PcdSystemMemorySize is set when
ArmVirtGetMemoryMap() is called.
On ArmVirtQemu, we currently abuse the implied ordering guarantees
provided by ArmPlatformLib, by implementing this as follows:
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf [ArmVirtPkg/ArmVirtQemu.dsc]
InitializeMemory() [ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c]
ArmPlatformInitializeSystemMemory() [ArmVirtPkg/Library/ArmVirtPlatformLib/Virt.c]
//
// set PcdSystemMemorySize from the DT
//
MemoryPeim() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
InitMmu() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
ArmPlatformGetVirtualMemoryMap() [ArmVirtPkg/Library/ArmVirtPlatformLib/VirtMem.c]
//
// consume PcdSystemMemorySize
//
Given that we are trying to get rid of ArmPlatformLib, or at least remove
some of these API functions that are never used for their original purpose
by any platforms, we need to move the PCD assignment elsewhere.
So create a PEIM-only version of QemuVirtMemInfoLib especially for
ArmVirtQemu, and add the PCD assignment code to its constructor.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the PL031 RTC driver library no longer depends on the ARM
platform specific ArmPlatformSysConfigLib, we no longer need to
implement ArmPlatform.h or have a resolution for that library.
This allows us to get rid of a rather dodgy practice of including
platform headers using compiler flags, which is a bad idea at various
levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The VariableRuntimeDxe driver may use CopyMem () on NOR flash regions,
assuming such regions always have full memory semantics. Given that
those regions cannot be mapped as ordinary memory on ARM (due to the
fact that the NOR flash requires device semantics while in write mode)
this prevents us from using BaseMemoryLibOptDxe in VariableRuntimeDxe,
since it may use unaligned accesses and/or DC ZVA instructions, both
of which are incompatible with mappings using device semantics.
Note that there is no way we can work around this by changing the
mapping type between 'memory' and 'device' when switching from read to
write mode and back, because the runtime mapping is created by the OS,
and cannot be changed at will.
So let's just switch to the unaccelerated version of BaseMemoryLib which
does not have the same problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Shannon Zhao <zhaoshenglong@huawei.com>
"ArmVirtXen.fdf" pulls in none of the drivers from
"MdeModulePkg/Universal/Network", therefore building them in
"ArmVirtXen.dsc", via "ArmVirt.dsc.inc", is wasted work.
Move the "MdeModulePkg/Universal/Network" drivers from "ArmVirt.dsc.inc"
to "ArmVirtQemu.dsc" and "ArmVirtQemuKernel.dsc".
Place the new block between the "Bds" and "SCSI Bus and Disk Driver"
blocks, similarly to its context in "ArmVirtQemuFvMain.fdf.inc".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of the reasons for introducing virtio-gpu support to OvmfPkg and
ArmVirtpkg was the fact that under KVM virtualization on ARM, the
legacy VGA cannot be used reliably. This is due to an implementation
detail of QEMU+KVM, which remaps cached host memory into the guest
address space as a framebuffer behind a PCI BAR. Given that the purpose
of a memory mapped framebuffer is its side effects, such BARs should
never be mapped cacheable in the guest, and the mismatched attributes
between host and guest result in a loss of coherency, visible as
corruption in the framebuffer image.
This issue does not occur under TCG emulation, nor did we expect it to
actually bring down the guest under KVM, and so it was deemed harmless
to keep support for the VGA device as well. However, as it turns out,
the fact that the framebuffer BAR is mapped using device semantics by
default may result in unalignment faults when we use the ordinary string
copy routines on the contents. In theory, we could work around this by
remapping the BAR as write combining, but it appears the generic PCI
bus driver does not actually implement this.
So let's remove the QemuVideoDxe driver altogether. This may result
in loss of functionality for use cases that rely on the framebuffer
to be directly addressable (such as EFIFB), but given that this never
worked reliably under KVM in the first place, let's not let that stop
us from dropping support for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For obscure reasons, ARM platforms use a different implementation of
the ResetSystem() runtime service call than other platforms. So let's
switch all ArmVirtPkg platforms to the generic version instead.
Given that all platforms use an implementation of EfiResetSystemLib [as
consumed by the ResetRuntimeDxe in EmbeddedPkg that we are replacing]
which is unlikely to be depended upon by out of tree platforms, let's
simply modify this library into an implementation of ResetSystemLib
instead [which is what the generic driver in MdeModulePkg consumes]
This does mean we need to update all clients at the same time, which
is why all changes are part of the same patch.
As before, warm reset and platform specific reset are mapped onto
cold reset (which is the only thing PSCI implements, at least the
version we depend on). The new library function EnterS3WithImmediateWake()
is left unimplemented, as permitted by the ResetSystemLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Include XenPlatformHasAcpiDtDxe and PlatformHasAcpiDtDxe in the 32-bit
builds too.
Please see https://bugzilla.tianocore.org/show_bug.cgi?id=524
why it is needed. With this patch my arm uefi VM boots.
Fixes: 3a2c1548fe
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: move long subj to commit msg body, add short subj]
[lersek@redhat.com: add Fixes reference]
[lersek@redhat.com: keep ACPI DXE modules grouped in QEMU DSCs]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
In general, we should not present two separate (and inevitably different)
hardware descriptions to the OS, in the form of ACPI tables and a device
tree blob. For this reason, we recently added the logic to ArmVirtQemu to
only expose the ACPI 2.0 entry point if no DT binary is being passed, and
vice versa.
However, this is arguably a regression for those who relied on DT
descriptions being available, even if the former behavior can be
restored by passing the -no-acpi switch to QEMU.
So allow a secret handshake with the UEFI Shell, to set a variable that
will result in ACPI to be disabled on subsequent boots even if -no-acpi
was not passed on the QEMU command line.
setvar -nv -bs -guid 50bea1e5-a2c5-46e9-9b3a-59596516b00a ForceNoAcpi =01
To delete the variable and revert to the old situation, simply omit the
value after the =
setvar -nv -bs -guid 50bea1e5-a2c5-46e9-9b3a-59596516b00a ForceNoAcpi =
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
ArmCpuLib is never used anywhere, and is about to be removed. So remove
any references from our .DSC files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The build flag and the FeaturePCD have no effect any longer, remove them.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In this patch, the ACPI protocol / driver chain is enabled dynamically,
when appropriate. This is being done in one larger patch, because
ArmVirt.dsc.inc, where AcpiTableDxe is built, is used by all the platform
DSCs.
No change in behavior should be observable after this patch on any
ArmVirtPkg platform.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 78c41ff519.
We realized that DXE drivers that are independent of AcpiPlatformDxe (that
is, independent of QEMU's ACPI generation), such as RamDiskDxe and
BootGraphicsResourceTableDxe, may produce and/or manipulate ACPI tables,
at driver dispatch or even at Ready To Boot.
This makes it unsafe for us to check for ACPI presence in the UEFI system
config table in a Ready To Boot callback, in order to decide about
exposing the DT.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for our platforms.
So instead, use the new symbolic GUID added for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QemuFwCfgS3Enabled() in "ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c"
returns constant FALSE.
The same implementation is now available factored-out in
"OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Base.c".
Resolve QemuFwCfgS3Lib to BaseQemuFwCfgS3LibNull.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Instead of having a build time switch to prevent the FDT configuration
table from being installed, make this behavior dependent on whether we
are passing ACPI tables to the OS. This is done by looking for the
ACPI 2.0 configuration table, and only installing the FDT one if the
ACPI one cannot be found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Laszlo Ersek
Samer El-Haj-Mahmoud
Leendert van Doorn
Ard Biesheuvel
Fu Siyuan
Michael D Kinney
Gerd Hoffmann
Paulo Alcantara
Nerijus Baliūnas