This attribute allows the EFI_MMC_HOST_PROTOCOL interface to manage
multiple instances in one driver.
EmbeddedPkg/MmcDxe: Add Revision attribute to the EFI_MMC_HOST_PROTOCOL
Note: The ARM PL180 and Omap35xx MMC host drivers has been updated.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12255 6f19259b-4bc3-4df7-8a09-765794883524
The MMC driver defaults to assume a card is not present. It then starts a timer in MmcDxeInitialize to check for card presence every 200ms.
However it does not immediately check to see if a card is present so if the EFI driver connection process occurs less than 200ms after the driver load, the connection process for partition
or filesystem drivers will fail because MediaPresent still is FALSE. To resolve this race condition, we need to immediately perform the presence check in the Start routine.
EmbeddedPkg/MmcDxe: Media ID Handling
Initialize the MMC device on Start or when presence changes instead of doing it on the Block IO calls. This way the layered drivers can be stopped and rebuilt with new Media IDs instead of
experiencing errors on calls to Block IO.
Proposed-by: Eugene Cohen (HP)
Reviewed-by: oliviermartin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12237 6f19259b-4bc3-4df7-8a09-765794883524
In the former version, we were checking the card was in the new state (Standby state).
But the transition to the nez state is only visible in the response of the next command.
This commit removes the check on the MMC state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12130 6f19259b-4bc3-4df7-8a09-765794883524
In the former version, the check was done for every BlockIo operation.
By using a periodical function, we check less time in consequence performance
are better.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12128 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
This function only create the HOB Handoff Info Table structure in memory.
In opposition to CreateHobList() that creates the structure and starts to
populate it with few HOBs.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11948 6f19259b-4bc3-4df7-8a09-765794883524
This interface allows to use different mechanism to store the HobList Pointer.
EmbeddedPkg/PrePiHobListPointerLib: Implementation of PrePiHobListPointerLib using PCD
This library uses a PCD to store the location of the HobList Pointer.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11947 6f19259b-4bc3-4df7-8a09-765794883524
The PrePiLib should really be used for the PEI phase (not the SEC phase).
It is the DXE core that take the tick for the end of the PEI phase.
The Platform PrePi module should be responsible to take the tick when it
starts for the PEI phase.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11946 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI platform designer had to add '%a' to their EBL prompt PCD to print out the path
in the shell.
This change makes the addition of the path automatically after the platform specific value
in the EBL shell.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11798 6f19259b-4bc3-4df7-8a09-765794883524
No data should not be an error return. Causing lots of REPORT_STATUS_CODE messages out of the TerminalDxe driver.
Signed-off-by: andrewfish
Reviewed-by: andrewfish
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11770 6f19259b-4bc3-4df7-8a09-765794883524
It is a UEFI requirement to update the cursor position infomation for each
string displayed using calls to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL->OutputString().
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11728 6f19259b-4bc3-4df7-8a09-765794883524
The MMC controller might be ready for data but not be in a 'ready' state
to send or receive commands.
This fix waits for the MMC controller to be in the correct state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11726 6f19259b-4bc3-4df7-8a09-765794883524
These scripts are used for UEFI Source debugging with Lauterbach T32.
They can be used at different stages of the UEFI boot time.
A README.txt file explains how to use these scripts.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11599 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin
andrewfish
hhtian