In smbiosview command in shell, below are the fields of SMBIOS
Type38 table which can be displayed in formatted manner.
1. Base Address
1. IPMI Specification Version.
2. NV Storage Device Address.
Base Address:
As per spec, the value in Base Address field of SMBIOS type38 table
should be right shifted by 1 if the interface type is SSIF.
IPMI Specification Version:
If the value in IPMI Specification Version field is 15H,
it should be displayed 1.5.
NV Storage Device Address:
If the value in NV Storage Device Address field is 0xFF,
it should be displayed as "No storage device is Present".
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan Selvaraj <sundaresans@ami.com>
Cc: Gayathri Thunuguntla <gayathrit@ami.com>
Signed-off-by: Prakash K <prakashk@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Update Shell Protocol EfiShellGetMapFromDevicePath() to not
set the end if the device path if it is already an end of
entire device path. This removes a write operation that can
cause failures if the Device Path Protocol is mapped to
read-only memory. In general Device Path Protocols should not
be modified unless the API explicitly states that the device
path is modified.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Add a new parser for the Arm Performance Monitoring Unit Table.
The APMT table describes the properties of PMU support
implemented by components in an Arm-based system.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
DP command should be able to parse the FPDT ACPI table and dump
the ResetEnd which was logged at the beginning of the firmware
image execution. So that DP can calculate SEC phase time duration
start from the beginning of firmware image execution.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: zhenhuay <zhenhua.yang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4135
Added spec version check while publishing new Type9 fields,
added Slot Pitch field which was missing and
corrected the publishing order as per Smbios spec.
Cc: Vasudevan S <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
ShellCommandRunMemMap() is updated to handle the case of unaccepted
memory type.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
The ACPI specification updated some terms in accordance with:
s1.1.1 Principle of Inclusive Terminology
Update the PCCT parser accordincly with these new terms.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
Add LOONGARCH64 architecture to ShellPkg for EDK2 CI testing.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Parse Type 0 or Local APIC structure.
Also parse the Local APIC Flags as bitfields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
This reverts commit d5fd86f256 for tag202208.
This feature will be merged after stable tag 202208 is created.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3995 (https://bugzilla.tianocore.org/show_bug.cgi?id=3995)
ACPI 6.4 spec states that if the revision field in the DSDT header is less
than 2, then all integers are restricted in width to 32 bits, including in
SSDTs.
Arm Base boot requirements state that platforms must conform to ACPI 6.3
or later, and that legacy tables are not supported.
Adds a check for this field and raise warning if revision is less
than 2 on arm.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Parse Type 0 or Local APIC structure.
Also parse the Local APIC Flags as bitfields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Since PeerGroups has a variable number of entries, new fields added
after PeerGroups are defined in a extended structure.
Done changes in PrintInfo.c to access those fields using
SMBIOS_TABLE_TYPE9_EXTENDED structure from SmBios.h.
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4014
If Configured Memory Speed is 65,535 MT/s or greater,
and the actual speed is stored in the Extended Configured Memory Speed
field. but current Smbiosview have no this logic.
Signed-off-by: Shengfengx Xue <shengfengx.xue@intel.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3906
update smbiosview type 0 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3896
update smbiosview type 9 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3900
update smbiosview type 41 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3839
Adds PrintFormatter function to the FADT flags field.
Prints indivisual flag name along with flag value.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3839
Adds ParseAcpiBitFields() which is based on
ParseAcpi() and capable of parsing the bit fields.
Supports parsing of UINT8, UINT16, UINT32 and UINT64 byte data.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3819
Ping GetTimerPeriod API returns sometime zero value when
StallCounter has smaller value than RttTimerTick (divide by zero)
which results some failure at ping UEFI shell command
Signed-off-by: MohammedX Rehan <mohammedx.rehan@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Bugzilla: 3770 (https://bugzilla.tianocore.org/show_bug.cgi?id=3770)
The PPTT parser in AcpiView incorrectly dereferences a pointer to
FlagName when trying to log an error with the PPTT cache flags, which
can lead to random crashes and other errors.
Also fix some spacing in the error message to ensure the message is
printed cleanly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This change is required by f4b7b473b4.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the Acpiview PPTT parser with the Cache ID field and relevant
validations as defined in tables 5.140 and 5.141 of the ACPI 6.4
specification.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the Acpiview PPTT parser to use Acpi64.h. As part of the changes,
remove support for parsing PPTT type 2 ID structure.
Mantis ID for removing PPTT type 2 structure:
2072 (https://mantis.uefi.org/mantis/view.php?id=2072)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ShellPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3749
Update package YAML files to ignore ECC errors that are
already present. These issues must be fixed in the future,
but should not block source code changes for these known
issues.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Add a comment to clarify that in Acpiview the ItemPtr is not set until
after the FieldValidator has been called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The patch adds entry into QueryTable.c for ProcessorUpgradeSocketLGA4677
from SMBIOS 3.5.0.
It also adds entries into QueryTable.c for ProcessorUpgradeSocketLGA4189
and ProcessorUpgradeSocketLGA1200 from SMBIOS 3.4.0.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add parser support for the new "MinTransferSize" field of the System
Locality, Latency and Bandwidth structure, introduced by the ACPI
specification version 6.4.
Also update the HMAT parser to use the newer ACPI version 6.4
definitions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhcihao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3563 (https://bugzilla.tianocore.org/show_bug.cgi?id=3563)
Update the Acpiview PCCT parser with the HW Registers based
Communications Subspace Structure (Type 5) as defined in Section 14.1.7
of the ACPI 6.4 specification.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar <sami.mujawar@arm.com>
Bugzilla: 3563 (https://bugzilla.tianocore.org/show_bug.cgi?id=3563)
Update the Acpiview PCCT parser to use Acpi64.h.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar <sami.mujawar@arm.com>
Bugzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
Update the Acpiview GTDT parser to use Acpi64.h and as such rename all
occurences of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix typo of 'specified' in UefiShellDriver1CommandsLib.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
`Status` can be used uninitialized:
/* Evaluates to FALSE */
if (ShellGetExecutionBreakFlag ()) {
Status = EFI_ABORTED;
break;
}
/* Evaluates to FALSE */
if (!Context->ContentDownloaded && !Context->ResponseToken.Event) {
Status = ...;
ASSERT_EFI_ERROR (Status);
} else {
ResponseMessage.Data.Response = NULL;
}
/* UNINITIALIZED USE */
if (EFI_ERROR (Status)) {
break;
}
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
`Dupes` is used only if `Duplicates != NULL` and function is left if
allocation of memory for `Dupes` fails, so it can't be used
uninitialized.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3228
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Message-Id: <20210511225616.5942-2-sergei@posteo.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The SystemEnclosureTypeTable in QueryTable.c contained a couple
of errors: value 0x10 is "Lunch Box" not "Main Server Chassis", and
the Sub Notebook value was repeated as 0x13 when that entry is for
"SubChassis". The entries in-between needed adjusted.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3262 (https://bugzilla.tianocore.org/show_bug.cgi?id=3262)
No need to print PCIe details while CapabilityId is 0xFFFF.
Limit the NextCapabilityOffset to PCI configuration space.
Signed-off-by: VincentX Ke <vincentx.ke@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3177
Add ContainedElementCount, ContainedElementRecordLength and
ContainedElements for smbiosview type 3.
Signed-off-by: Mars CC Lin <mars_cc_lin@phoenix.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3045 (https://bugzilla.tianocore.org/show_bug.cgi?id=3045)
Add a new parser for the Heterogeneous Memory Attribute Table. The
parser also validates some fields for this table.
The HMAT table is used to describe the memory attributes such as memory
side cache attributes and bandwidth and latency details related to
memory proximity domains. The info in the HMAT table can be used by an
operating system for optimisation.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Introduce the ShellSortFileList() function, for sorting an
EFI_SHELL_FILE_INFO list, by FileName or by FullName.
Duplicates can be kept in the same list, or separated out to a new list.
In either case, the relative order between duplicates does not change (the
sorting is stable).
For the sorting, use OrderedCollectionLib rather than SortLib:
- The PerformQuickSort() function from the latter has quadratic worst-case
time complexity, plus it is implemented recursively (see
"MdeModulePkg/Library/UefiSortLib/UefiSortLib.c"). It can also not
return an error on memory allocation failure.
- In comparison, the Red-Black Tree instance of OrderedCollectionLib sorts
in O(n*log(n)) worst-case time, contains no recursion with the default
PcdValidateOrderedCollection=FALSE setting, and the OrderedCollectionLib
class APIs return errors appropriately.
The OrderedCollectionLib APIs do not permit duplicates natively, but by
using lists as collection entries, stable sorting of duplicates can be
achieved.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Neither of the "CPU Socket Unpopulated" or "Do not reboot" messages
should contain the word "Bits".
Remove them and update the identifier for the "Do not reboot" message
to remove the word "BITS".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Bugzilla: 3048 (https://bugzilla.tianocore.org/show_bug.cgi?id=3048)
Add a new parser for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
AEST enables kernel-first handling of errors in a system that supports
the Armv8 RAS extensions. It covers Armv8.2+ RAS extensions for PEs
and the RAS system architecture for non-PE system components.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
Define structures for Resizable BAR Capability in
MdePkg/Include/IndustryStandard/PciExpress21.h,
Change ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c
to use new structures.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Bugzilla: 3047 (https://bugzilla.tianocore.org/show_bug.cgi?id=3047)
Create a new parser for the PCCT Table.
The PCCT Table is used to describe how the OSPM can
communicate with entities outside the platform. It
describes which memory spaces correspond to which
entity as well as a few of the needed information
to handle the communications.
This new PCCT parser dumps the values and names of
the table fields. It also performs some validation
on the table's fields.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3046 (https://bugzilla.tianocore.org/show_bug.cgi?id=3046)
The field validator function provides means to validate fields
in the ACPI table structures. To print complex field types a
print formatter function is provided.
The field validator was being invoked for simple data fields
for which the default print format is used. However, the field
validator function was not invoked if a print formatter function
was provided.
This problem is noticed when a Generic Address Structure (GAS)
is printed using DumpGas() and a field validator is present
to validate the GAS structure.
To fix this move the invocation of the field validator after
the field is printed such that the validation function is
called even when a print formatter function is present.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In SmBios.h, the SMBIOS_TABLE_TYPE4 field "ProcessorManufacture"
should be "ProcessorManufacturer".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2998
In the function FileBufferCutLine(),set the CutLine pointer to NULL,
The function header specifies that the pointer is valid on a successful
or failed return code.
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add support for it to the
smbiosview command.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The "boot from CD supported" string definition name should contain the
word "from" instead of "form".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix a couple of typos in SmbiosViewStrings.uni:
"Boot form CD" should be "Boot from CD", and "plugged from the wall"
should be "plugged into the wall".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2352
Refer to SMBIOS 3.4 spec, add new memory device type - DDR5
and LPDDR5 support for the shell command "smbiosview".
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Introduce an http client utilizing EDK2 HTTP protocol, to
allow fast image downloading from http/https servers.
HTTP download speed is usually faster than tftp.
The client is based on the same approach as tftp dynamic command, and
uses the same UEFI Shell command line parameters. This makes it easy
integrating http into existing UEFI Shell scripts.
Note that to enable HTTP download, feature Pcd
gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections must
be set to TRUE.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2860
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Nd <nd@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Add configuration ExceptionList and IgnoreFiles for package config
files. So users can rely on this to ignore some Ecc issues.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Change how some SMBIOS TYpe 17 field values are printed:
- TotalWidth, DataWidth, ConfiguredMemoryClockSpeed: Print as
hex values instead of decimal, since there are some special meanings
for certain values (e.g. 0xFFFF)
- VolatileSize, NonVolatileSize, CacheSize, and LogicalSize: Print
as "0x%lx" instead of "0x%x" to prevent truncating output when
printing these QWORD fields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Add configuration IgnoreFiles for package config files.
So users can rely on this to skip license conflict for
some generated files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Simple application wrapper that invokes the shell
command wrapper for 'acpiview'.
This allows the AcpiView functionality to be used
on platforms with older specifications of the UEFI
shell or where the 'acpiview' command is not built in
due to platform build configuration.
Furthermore, this app can be integrated into more comprehensive
testing frameworks as a single component of a more thorough
specification compliance validation strategy.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
The UefiShellAcpiViewCommandLib is converted from NULL library to a
named library so that it may be used in modules other than shell.
The library interface exposes the main method for to AcpiView
functionality as well as a helper method to dump a buffer to a file.
The Shell module is still built by pulling UefiShellAcpiViewCommandLib
as a NULL library to preserve the modularity of shell builds.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
Method is refactored into two parts. A new method is
created that dumps arbitrary buffers into a newly created
file. This method is called from core code after the core code
determined the appropriate filename to be used.
This improves the modular design.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
Parsing command line parameters is done in the shell
command wrapper. This declutters the core code and improves
modular design.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
The table count module level symbols are now reset when
executing the core method, rather than the shell command
wrapper.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
A new file and header (AcpiViewConfig.[ch]) is created
that houses the user configuration. This declutters the
core code and improves modularity of the design.
The module level symbols for verbosity, table selection, and
highlighting are refactored into the new file.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
The error and warning counters are reset in the AcpiView main method.
This improves reusability of the main method.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2780
The timezone of following cities should be updated:
Istanbul: UTC+3
Novosibirsk: UTC+7
Georgetown (Guyana): UTC-4
Signed-off-by: Dorapika Wu <chuan-hsun.wu@hpe.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
This prevents overflow when printing DWORD fields such as the type 17
tables's extended DIMM size.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For Arm-based platforms, count the instances of installed tables for
each ACPI table listed as 'mandatory' in any Server Base Boot
Requirements (SBBR) specification.
Validate that the all the mandatory SBBR tables present. Report an error
for each missing table.
This new feature is optional and can be enabled with the -r command line
parameter.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For Arm-based platforms, define and implement an interface for Server
Base Boot Requirements (SBBR) compliance checks. The library is
responsible for validating that all mandatory ACPI tables are installed
on the platform.
Internally, the library maintains a data structure which tracks
instance counts for ACPI tables which are labeled as 'mandatory' in any
SBBR specification version. The provided interface allows:
- resetting all instance counts to 0
- incremementing the instance count for a table with a given signature
- validating the instance counts against the requirements in SBBR
The ACPI table requirements for each SBBR spec version are represented
internally as a list of table signatures.
Every missing mandatory table (for the input SBBR version) is reported
to the user as a separate error. If all requirements are met, an info
message is displayed.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2032
'ping' command's receive flow utilizes a single Rx token which it
attempts to reuse before recycling the previously received packet.
This causes a situation where under ICMP traffic,
Ping6OnEchoReplyReceived() function will receive an already
recycled packet with EFI_SUCCESS token status and finally
dereference invalid pointers from RxData structure.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2534
Extend validation of ACPI structure lengths which are read from the
ACPI table being parsed. Additionally check if the structure 'Length'
field value is positive. If not, stop parsing the faulting table.
Some ACPI tables define internal structures of variable size. The
'Length' field inside the substructure is used to update a pointer used
for table traversal. If the byte-length of the structure is equal to 0,
acpiview can enter an infinite loop. This condition can occur if, for
example, the zero-allocated ACPI table buffer is not fully populated.
This is typically a bug on the ACPI table writer side.
In short, this method helps acpiview recover gracefully from a
zero-valued ACPI structure length.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Check if the ACPI table length, as reported in the ACPI table header, is
big enough to fit at least the header itself.
If not, report an error to the user and stop parsing the table in order
to prevent buffer overruns.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove duplicate Generic Address Structure (GAS) and ACPI table header
size definitions. Replace any dependencies with the definitions from
Acpi63.h.
AcpiParser.h redefines the size of Generic Address Structure (GAS) and
the ACPI table header. The motivation is to 'minimise any reference to
the EDK2 ACPI headers in an attempt to provide cross checking'. While
the redefined values are unlikely to change, redefinition causes
unnecessary maintenance overhead for acpiview.
In addition to this, EDK2 ACPI headers are referenced throughout the
entire project, so the assumption should be that the definitions in
these header files are correct.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Check if global (in the scope of the DBG2 parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global (in the scope of the GTDT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global (in the scope of the IORT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if the NumberOfPrivateResources, ProcessorTopologyStructureType
and ProcessorTopologyStructureLength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if the MadtInterruptControllerType and
MadtInterruptControllerLength pointers have been successfully updated
before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if SratRAType and SratRALength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
1. Check if the 'Number of System Localities' provided can be
represented in the SLIT table. The table 'Length' field is a 32-bit
value while the 'Number of System Localities' field is 64-bit long.
2. Check if the SLIT matrix fits in the table buffer. If N is the SLIT
locality count, then the matrix used to represent the localities is
N*N bytes long. The ACPI table length must be big enough to fit the
matrix.
3. Remove (now) redundant 64x64 bit multiplication.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if SlitSystemLocalityCount pointer has been successfully updated
before it is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global pointers have been successfully updated before they
are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if XsdtAddress pointer has been successfully updated before it
is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
For fields outside the buffer length provided, reset any pointers,
which were supposed to be updated by a ParseAcpi() function call to
NULL. This way one can easily validate if a pointer was successfully
updated.
The ParseAcpi() function parses the given ACPI table buffer by a
number of bytes which is a minimum of the buffer length and the length
described by ACPI_PARSER array. If the buffer length is shorter than
the array describing how to process the ACPI structure, then it is
possible that the ItemPtr inside ACPI_PARSER may not get updated or
initialized. This can lead to an error if the value pointed to by
ItemPtr is later used to control the parsing logic.
A typical example would be a 'number of elements' field in an ACPI
structure header which defines how many substructures of a given type
are present in the structure body. If the 'number of elements' field
is not parsed, we will have a dangling pointer which could cause a
problem later.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
ShellParametersProtocol::UpdateArgcArgv() can return
a EFI_INVALID_PARAMETER value. Document it.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
ShellParametersProtocol::ParseCommandLineToArgs() can return
a EFI_INVALID_PARAMETER value. Document it.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Prakash.K
Michael D Kinney
Jeff Brasen
zhenhuay
Zhang, JuX
Sainadh Nagolu
Min M Xu
Pierre Gondois
Chao Li
Abdul Lateef Attar
Liming Gao
Edward Pickup
Shengfengx Xue
Sami Mujawar
Bo Chang Ke
Rehan, MohammedX
Chris Jones
Michael Kubacki
Abdul Lateef Attar
Star Zeng
gthotala
Rebecca Cran
Sergei Dmitrouk
Joey Gouly
Dandan Bi
Abner Chang
VincentX Ke
Mars CC Lin
Marc Moisson-Franckhauser
Laszlo Ersek
Luo, Heng
Enze Zhu
Gao, Zhichao
Vladimir Olovyannikov
Shenglei Zhang
Samer El-Haj-Mahmoud
Tomas Pilar
Dorapika Wu
Rebecca Cran
Krzysztof Koch
Maciej Rabeda
Philippe Mathieu-Daud?