For MM, gMmProfileDataHobGuid Memory Allocation HOB is defined to
indicate SMM profile feature enabled or not. If the HOB exist, SMM
profile base address and size will be returned in the HOB, so no need
to consume the PcdCpuSmmProfileEnable feature PCD to check enable or
disable.
To achieve above purpose, Add the IsSmmProfileEnabled () function.
With this change, Both MM and SMM can use the new function for
SMM profile feature check.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
SMM Profile start can be started early in SMM CPU EntryPoint
since page table for SMM profile is ready.
No need wait smm ready to lock.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
For MM:
SMRAM & PageTable itself & SMM Paging State shall be configured
once the gEdkiiPiMmMemoryAttributesTableGuid is installed by
SMM core. It will happen after MmIpl.Entrypoint.
PerformRemainingTasks will be called before MmIpl.Entrypoint
exit.
For SMM:
SMRAM & PageTable itself & SMM Paging State are still
configured in the first SMI when SMM ready to lock happen.
So, this patch is to differentiate PerformRemainingTasks for MM
and SMM.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
This patch adds the PiCpuStandaloneMmEntry for MM, which is
the module Entry Point of the CPU StandaloneMm driver.
In the Entry Point:
1. Init the mIsStandaloneMm flag
2. Call PiSmmCpuEntryCommon
3. Init SmiCommandPort
4. Install the SMM Configuration Protocol.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdCpuMaxLogicalProcessorNumber),
so move the PCD usage to DxeSmm.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
Define the mIsStandaloneMm to indicate it's the MM_STANDALONE MM CPU
driver or DXE_SMM_DRIVER SMM CPU driver execution.
With mIsStandaloneMm, GetMpInformationFromMpServices() can be skipped
for the MM CPU since it can not call the
GetMpInformationFromMpServices() due to the NON-SMM MP Services usage
for the MP Information.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not call EfiLocateFirstAcpiTable to get the system
port address of the SMI Command Port. This patch just hard-code
to 0xB2 for MM CPU.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdCpuSmmSyncMode &
PcdCpuSmmApSyncTimeout & PcdCpuSmmApSyncTimeout2), so, it
consumes the gMmCpuSyncConfigHobGuid for RelaxedApMode &
Timeout & Timeout2.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
MM CPU can not use the dynamic PCD (PcdAcpiS3Enable), so, it
consumes the gMmAcpiS3EnableHobGuid to get ACPI S3 enable flag.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
This patch adds the empty .c for MM CPU specific implementation：
NonMmramMapStandaloneMm.c
PiSmmCpuStandaloneMm.c
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
Jiaxin Wu