Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18413 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18411 6f19259b-4bc3-4df7-8a09-765794883524
Our tool can support OrderedList which has default value,but doesn't update the
source code in HiiDatabase when parse the ifr data.Now update the code and add
test case in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18388 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Previously construct Default Value in AltResp for string opcode is String Id,
Now change it to string value if the string opcode has default value.
This change is compatible for SetupBrowser to handle.And add default value
for string in DriverSample to test this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18337 6f19259b-4bc3-4df7-8a09-765794883524
There may be anti-flash wear out feature to forbid erase operation after end of dxe.
The code is missing some error handling for erase operation failure,
it should return directly after the erase operation failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18320 6f19259b-4bc3-4df7-8a09-765794883524
Since the variable check service has be separated to VarCheckLib
from Variable driver, so update Variable driver to consume the
separated VarCheckLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18286 6f19259b-4bc3-4df7-8a09-765794883524
Check the local variable 'NameSpace' before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18274 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
between variable HOB and NV storage.
Variable HOB may be built by a system that supports and loads variable
default, the variables in the HOB will be flush to NV storage after
variable write search ready.
After that, if the variable's Attributes is changed by someone and
system reboots and tries to load default again, the variable Attributes
mismatch case between variable HOB and NV storage will appear.
Original code did not handle the case correctly, that may eventually
cause NV storage contains two valid same variables that will lead to
system hang if GetNextVariableName() called.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18225 6f19259b-4bc3-4df7-8a09-765794883524
DHCP policy is applied as default at boot time on all NICs in the system, which results
in all NIC ports attempting DHCP and trying to acquire IP addresses during boot.
Ip4 driver should only set dhcp as default policy, and not trigger DORA at driver binding
start(). We should start DORA until one IP child is configured to use default address.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18201 6f19259b-4bc3-4df7-8a09-765794883524
Change a macro name to fit EDK2 naming conventions: Use all capital letters for #define.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18200 6f19259b-4bc3-4df7-8a09-765794883524
Once the question is refreshed,the processing should happen in the callback function
of EFI_BROWSER_ACTION_RETRIEVE case,rather than EFI_BROWSER_ACTION_CHANGING in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18150 6f19259b-4bc3-4df7-8a09-765794883524
If the storage of the question is EFI_HII_VARSTORE_BUFFER/EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER,
in SetupBrowserDxe the configuration stings contain uppercase,but HiiDataBaseDxe generates the
ConfigResp string in lowercase,they mismatch,so FindQuestionFromProgress function is broken.
Now convert the configuration string in SetupBrowserDxe to lowercase to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18143 6f19259b-4bc3-4df7-8a09-765794883524
This fix is used to solve VS2015 warning "local variable is not initialized before use"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18108 6f19259b-4bc3-4df7-8a09-765794883524
DHCP4 service allows only one of its children to be configured
in the active state,If the DHCP4 D.O.R.A started by IP4 auto
configuration and has not been completed, the Dhcp4 state machine
will not be in the right state for the PXE to start a new round
D.O.R.A., so we need to switch it's policy to static.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18107 6f19259b-4bc3-4df7-8a09-765794883524
When load default value or save changes will pop up message box to let user
confirm,Y means confirm and N means ignore,now add Esc key with the
same function of N key.And change the content of pop up message in .uni file,
now will display "Press 'Y' to confirm, 'N'/'ESC' to ignore."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18076 6f19259b-4bc3-4df7-8a09-765794883524
Enhance the setupbrowserdxe to output debug message when DisplayEngineDxe is
not installed and this will be easy for user to find the reason why can not
enter Setup page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18075 6f19259b-4bc3-4df7-8a09-765794883524
Reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to only allocate 2 pages (1G page enabled) or
6 pages for 4G page table, and 8 extra pages to handles > 4G request
by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18070 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
The code is updated to build 4G page table by default and only use 8 extra
pages to handles > 4G request by page fault.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18069 6f19259b-4bc3-4df7-8a09-765794883524
We are going to reduce reserved memory consumption by page table buffer,
then OS can have more available memory to use.
Take PhysicalAddressBits = 48 and 2MB page granularity as example,
1:1 Virtual to Physical identity mapping page table buffer needs to be
((512 + 1) * 512 + 1) * 4096 = 1075843072 bytes = 0x40201000 bytes.
Current BootScriptExecutorDxe handles > 4G request by page fault because
S3ResumePeim only builds 4G page table when long mode waking vector is
not needed, but BootScriptExecutorDxe still assume the page table buffer for
page table is at 1:1 Virtual to Physical identity mapping.
To reduce reserved memory consumption, the code is updated to only use
8 extra pages to handles > 4G request by page fault.
Another, when both BIOS and OS wants long mode waking vector,
S3ResumePei should have established 1:1 Virtual to Physical identity mapping
page table for ACPI spec requirement, so no need to hook page fault handler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18067 6f19259b-4bc3-4df7-8a09-765794883524
As variable HEADER_ALIGNMENT = 4, the MonotonicCount in
AUTHENTICATED_VARIABLE_HEADER may be not UINT64 aligned,
so go to use ReadUnaligned64() to ensure read data correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18064 6f19259b-4bc3-4df7-8a09-765794883524
GatewayIpAddress and SubnetMask do not exist in old IPv4_DEVICE_PATH, this
will lead new IScsiDxe to error if IPv4_DEVICE_PATH in system is not
updated.
Following UEFI2.5 spec of IPv4_DEVICE_PATH do a check before accessing
fields only defined in new version, add a judgement here to make old
IPv4_DEVICE_PATH and new IScsiDxe can cowork.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: rewrapped commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18057 6f19259b-4bc3-4df7-8a09-765794883524
When mismatch happens,there exists one case that exit current
form and display last form.Assert code don't cover this case.
Now add check to handle this situation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18053 6f19259b-4bc3-4df7-8a09-765794883524
The first parameter of match2 opcode should be the pattern
and the second one should be the string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18052 6f19259b-4bc3-4df7-8a09-765794883524
if the instance of the DHCP4 protocol driver is in the Dhcp4Bound
status that is DHCP configuration has completed, so the Dhcp4->Start
FUNC in the EfiPxcBcDhcp() will return EFI_ALREADY_STARTED status
which lead to EfiPxeBcDhcp FUNC not in correspondence with UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: updated copyright year as Siyuan asked]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18050 6f19259b-4bc3-4df7-8a09-765794883524
Fix git 59a8cfd4 (SVN r17869) removes DHCP4.TransmitReceive()and DORA
process dependency, but it updated TransmitReceive() to take the ownership
of DhcpSb->ActiveChild but never release it. This will break the retransmit
and lease time out counter of DORA.
To fix that, TransmitReceive() doesn't need to be the ActiveChild, and the
timer routine should be updated to handle the TransmitReceive specially.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18048 6f19259b-4bc3-4df7-8a09-765794883524
This driver is soon going to be built by ArmVirtPkg/ArmVirtQemu.dsc
(without any changes). Although VALID_ARCHITECTURES is not used by the
build system (it is just a comment), it is best kept up-to-date for human
readers' sake.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Elvin Li <elvin.li@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18041 6f19259b-4bc3-4df7-8a09-765794883524
1. Get default terminal type from PCD rather than using PCANSI
directly in BuildTeminalDevpath;
2. Only terminal type is needed to create an TerminalDev instance, so
remove the useless code of creating and freeing DefaultNode.
3. Some white space refining.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18027 6f19259b-4bc3-4df7-8a09-765794883524
This is bug fix for TerminalDxe: NullRemaining should be set to FALSE
by fault and then be set to TRUE conditionally.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18026 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Dependent network drivers, libraries and applications have been migrated to (or extended to) the new protocol version.
For example:
git 7c25b7ea (SVN r17869): ping & ifconfig
git 00a6ad1b (SVN r17870): UefiHandleParsingLib
git 6c5c70d6 (SVN r17873): DxeNetLib
git 39561686 (SVN r17874): IpSecDxe
git c581e503 (SVN r17875): EfiSocketLib
This patch is based on related packages(MdeModulePkg, Nt32Pkg, ArmPlatformPkg, ArmVirtPkg, EmulatorPkg, OvmfPkg, Vlv2TbltDevicePkg) clean-up work finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17917 6f19259b-4bc3-4df7-8a09-765794883524
FvSimpleFileSystem adds '.efi' to the EFI application and drivers
filenames even through this extension is not present in the real
filename of the EFI module.
In the current behaviour, it would not be possible to open an EFI
application using FvSimpleFileSystem if the extension has been omitted
in the given filename.
It can be create some confusion if someone wants to try to
open a file with the real application name (eg: 'Shell').
This patch adds support to try again to look for the file with the
extension if it had failed to find it without the extension.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17903 6f19259b-4bc3-4df7-8a09-765794883524
Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
Cecil Sheng
Eric Dong
Dandan Bi
Samer El-Haj-Mahmoud
Sunny Wang
Liming Gao
Star Zeng
Ruiyu Ni
Jiaxin Wu
fanwang2
Michael D Kinney
Zhang Lubo
Laszlo Ersek
Heyi Guo
Roy Franz
Olivier Martin