Commit Graph

7 Commits

Author SHA1 Message Date
Brijesh Singh 1916513047 OvmfPkg/VirtioBlkDxe: map VRING using VirtioRingMap()
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address to device address.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-28 11:00:14 +02:00
Giri P Mudusuru 694673c910 OvmfPkg: Fix typos in comments
- accessibla to accessible
  - exeuction to execution

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-07-08 10:11:15 +02:00
Laszlo Ersek fcb636ea42 OvmfPkg: VirtioBlkDxe: reset device at ExitBootServices()
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
    (This is intentional.) Code that executes after ExitBootServices() is
    permitted to reuse such memory.

(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
    at any time, even without explicit virtio kicks from the guest.

Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.

Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18624 6f19259b-4bc3-4df7-8a09-765794883524
2015-10-16 19:52:24 +00:00
Olivier Martin 56f65ed838 OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL
This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>

v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
  propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
  SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
  a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
  VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
  loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
  a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
  VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
  MMIO operation
- VirtioNetInitialize(): fix destination error label for when
  SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
  fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
  operation

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 16:58:22 +00:00
jljusten 045b46e92d OvmfPkg: move VirtioBlkDxe/Virtio.h to Include/IndustryStandard/Virtio.h
This commit consists of:
- a verbatim move ("similarity index 100%" in git parlance),
- an updated #include directive in VirtioBlkDxe/VirtioBlk.h,
- and an OvmfPkg.dec package entry in VirtioBlkDxe/VirtioBlk.inf, so that
  the new include directory is searched.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13836 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-12 18:52:24 +00:00
jljusten 936e3a5dfd OvmfPkg: add inclusion guards to VirtioBlkDxe/VirtioBlk.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13835 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-12 18:52:05 +00:00
jljusten fd51d75991 OvmfPkg: introduce virtio-blk driver
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13798 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-08 07:32:59 +00:00