If FirmwareVolumeShadow PPI is available, then use it to
shadow FVs to memory. Otherwise fallback to CopyMem().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Patel Umang <umang.patel@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the SecurityPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2673
M mean that Measured Boot, V mean that Verified Boot.
The FvReport do below:
1. Do nothing if neither M nor V
2. Allocate pages to save the firmware volume and use it to install
firmware info Ppi
3. Install PreHashFv Ppi if the FV need measurement.
4. Verify the Hash if the FV need verification
Notes:
1. The component is used to verify the FV or measure the FV
2. Copy action is just for security purpose but not main purpose.
3. If you use this component, Doesn't need to copy in other compoent
which result time consumption.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3615
Debug message should be added for indicating IBB is successfully verifying
the OBB.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Min M Xu <min.m.xu@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Signed-off-by: Longlong Yang <longlong.yang@intel.com>
Reviewed-by: Min M Xu <min.m.xu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3333
In function InstallPreHashFvPpi, when calculating the size
of struct HASH_INFO, sizeof is used twice. This bug does
not lead to buffer overflow, "sizeof (HASH_INFO)" is 4,
whereas "sizeof (sizeof (HASH_INFO))" is 4 or 8.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2265
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1617
This driver implements a common checker, verifier and reporter which is
independent of hardware based root-of-trust.
Usually the hardware based root-of-trust will not verify all BIOS but
part of it. For example, Boot Guard will only verify IBB segment. The IBB
needs to verify other part of BIOS, i.e. other FVs to transfer control to
from IBB. This driver plays the role in IBB to verify FVs not covered by
hardware root-of-trust to make sure integrity of the chain of trust.
To be hardware/platform independent, PPI
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid
is introduced for platform to pass digest information to this driver.
This PPI should include all information needed to verify required FVs in
required boot mode.
struct _EDKII_PEI_FIRMWARE_VOLUME_INFO_STORED_HASH_FV_PPI {
FV_HASH_INFO HashInfo;
UINTN FvNumber;
HASHED_FV_INFO FvInfo[1];
};
To avoid TOCTOU issue, all FVs to be verified will be copied to memory
before hash calculation. That also means this driver has to be run after
permanent memory has been discovered.
For a measured boot, this driver will install
gEdkiiPeiFirmwareVolumeInfoPrehashedFvPpiGuid
to report digest of each FV to TCG driver.
For a verified boot, this driver will verify the final hash value
(calculated from the concatenation of each FV's hash) for indicated
FVs against the hash got from platform/hardware.
If pass, it will build EFI_HOB_TYPE_FV (consumed by DXE core) and/or
install gEfiPeiFirmwareVolumeInfoPpiGuid (consumed by PEI core), and
then report status code PcdStatusCodeFvVerificationPass.
If fail, it just report status code PcdStatusCodeFvVerificationFail
and go to dead loop if status report returns.
The platform can register customized handler to process pass and fail
cases differently.
Currently, this driver only supports hash (sha256/384/512) verification
for the performance consideration.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Umang Patel
Michael Kubacki
Guomin Jiang
Yang, Longlong
Wenyi Xie
Sean Brogan
Shenglei Zhang
Jian J Wang