v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When the platform gets the target info from DHCP (option 17) and the ISCSI
server is expressed as IP address, the value of DnsMode should be false,
otherwise, the failure will happen in certain case.
please refer to https://bugzilla.tianocore.org/show_bug.chi?id=823 for
the detailed steps.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Karunakar P <karunakarp@amiindia.co.in>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Karunakar P <karunakarp@amiindia.co.in>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in NetworkPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Base on the request of https://bugzilla.tianocore.org/show_bug.cgi?id=710,
we provide this patch to IPv6 condition check by leveraging AIP Protocol.
Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The existing attempt should not trigger the DHCP process if it
doesn't associates with the current NIC. That's incorrect when
displaying the initiator info in attempt page.
Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
The commits utilizes a local variable to store the length of a string
which will be used right after.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
When creating the ISCSI string OpCode for IP_ADDRESS, the max length
should be IP(4)_STR_MAX_SIZE instead of IP(4)_MAX_SIZE.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The last 3 bytes of ISID should be able to changed by setting the keyword with
a value with length 6 (only last 3 bytes) or 12 (full ISID) according to the
keyword definition in UEFI configuration namespace website.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
DHCP4 service allows only one of its children to be configured in the active
state. If the DHCP4 D.O.R.A started by IP4 auto configuration and has not
been completed, the Dhcp4 state machine will not be in the right state for
the iSCSI to start a new round D.O.R.A. So, we need to switch it's policy to
static.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
if the server name expressed as a site local address begain with FEC0
when retrieving from dhcpv6 option 59 boot file url, it incorrectly process it
as a dns name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Need to check variable of mPrivate whether is
null before used and redefine the array length
of target address for keyword.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Add check logic and error message for some keywords validity.
show target address in URL format and MAC address correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Currently, error handling in IScsiDriverEntryPoint is incorrect. For
example, if IScsiCreateAttempts() return error due to the limited max
variable size, iSCSI will not unload the configuration entries.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Since we use the Attempt and index as the attempt variable name instead of
the MAC address plus index, we need to update this to check the whether
the Controller handle is configured to use DNS protocol
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2: need to check the global variable mPrivate before using it in
the Convert AttemptConfigData To IfrNvData by Keyword function.
Add check logic for some attempt variable to enhance code in iSCSI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
Add error handling if can not create Attempts in driver entry point.
Since we support to define a macro be a PCD value, we enhance our code
by modifying the structure in IFR_NVDATA. This effect code logic mainly
in Creating Keywords,Convert IFR NvData To AttemptConfigData ByKeyword and
reverse function.
Fix typo errors and sync based on the latest code.
Enable iSCSI keywords configuration based on x-UEFI
name space. we introduce new PCD to control the attempt
numbers which will be created in non activated state, besides
the Attempt name is changed to READ_ONLY attribute in UI.
We can invoke KEYWORD HANDLER Protocol to configure
the related keywords.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin jiaxin.wu@intel.com
Update existing #define and add a new #define used for the
PCD PcdIScsiAIPNetworkBootPolicy. Update the code in iScsiStart
according to the #define changes in iScsiDriver.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*1. Add IScsiDnsIsConfigured function in IScsiSupported to check
attempt using DNS protocol or not.2. Fix wrongs typos in IScsiDns.c
and .uni file.3. define a macro for the length of target URL.4.
update the Copyright to 2017.
Add DNS support for target URL directly configuration in UI.
Besides, When we enable the option (Get target info via DHCP) ,
the dhcp server will return target info include the rootpath,
like the format
"iscsi:"<servername>":"<protocol>":"<port>":"<LUN>":"<targetname>
According to the RFC 4173,the server name region is expressed as
IPv4(192.168.10.20 )or IPv6 ([2000:bbbb::3]) or domain name,
but currently we only support the IP address format.
To enable this feature, we can support both.
Another enhancement is that we can deal with the data received from
the iSCSI login response with an target redirection status,
in which contains the Target Address in the format
domainname[:port][,portal-group-tag] required by RFC 3720.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
According to RFC 3720, the TargetAddress provided in a redirection
might be a DNS host name, a dotted-decimal IPv4 address, or a
bracketed IPv6 address. Current ISCSI driver in Networkpkg only
supports dotted-decimal IPv4 address, so we need add IPv6 address
support since it is a combo driver supporting dual stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT
once redirection occurs, which removes the possibility of the OS
to reconnect to the configured IP for load balancing. The behavior
is not explicitly described in IBFT spec, though the MSFT expert
confirm we should record original user setting rather than
publish the redirected IP.
Thanks Sriram for reviewing and validating this patch in his test-bed.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the AttemptConfig structure
will be freed, but the mCallbackInfo->Current is not
configured as null and this pointer will be used again in
IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The IScsiDxe module encounters a build error for IA32 arch using the
latest version of VS2015:
IScsiDxe.lib(IScsiProto.obj) : error LNK2001: unresolved external symbol
__allmul
The cause is line 141 in file NetworkPkg\IScsiDxe\IScsiProto.c. The third
parameter for gBS->SetTimer() function is of type UINT64, so the
multiplication should use the MultU64x32() function now.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The bug existed in replacing AsciiStrToUnicodeStr with AsciiStrToUnicodeStrS,
since MacString now is a pointer, the value sizeof(MacString)/sizeof (MacString[0])
is not correct here as the third parameter.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
v2:
*Since we have redefined the name of arch types in Dhcp.h for http boot,
it need to change corresponding codes.
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
*Fix some memory leak issue.
This patch is used to replace ASSERT with error handling in Http boot
Driver and IScsi driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
If two attempts added on different NIC and enable
MPIO attribute, then change the attempts order. If
both two attempts succeed to connect the target,it
should abort the later one in the order and uninstall
ExtScsiPassThruProtocol Interface, But now it
unistall it twice.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Add error handling logic in DriverBingingStop function,
it may return error status when invoking the
UninstallProtocolInterface.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
This patch is used to fix suspicious dereference of pointer before
NULL check in IScsiDxe driver.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19552 6f19259b-4bc3-4df7-8a09-765794883524
According to UEFI spec, iSCSI HBA must install an AIP instance
with network boot information block. This patch updates UEFI
iSCSI driver to check whether there are AIP instances installed
by iSCSI HBA adapter and if yes, the UEFI iSCSI driver will return
EFI_ABORTED in its driver binding Start(). Also the patch
introduces a PCD PcdIScsiAIPNetworkBootPolicy for
platform owner to define particular policy when the iSCSI HBA
will survive and UEFI iSCSI will fail. The default policy is
STOP_UEFI_ISCSI_IF_AIP_SUPPORT_OFFLOAD which means that when ISCSI HBA
adapter installs an AIP and claims it supports an offload engine
for iSCSI boot, the UEFI iSCSI driver will return EFI_ABORTED.
The patch V2 adds a new value ALWAYS_USE_UEFI_ISCSI_AND_IGNORE_AIP
to PCD PcdIScsiAIPNetworkBootPolicy. This allows the platform to
avoid running into buggy IHV drivers that have issue with AIP.
It is suggested by El-Haj-Mahmoud,Samer <samer.el-haj-mahmoud@hpe.com>.
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19367 6f19259b-4bc3-4df7-8a09-765794883524
The patch fixes iSCSI driver can't reinstate itself when configured
in AutoConfigure mode and IPv6 stack is actually used.
The issue occurs when iSCSI driver communicates with
iSCSI LIO target in IPv6 path and the target sends
back TCP FIN packets randomly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18546 6f19259b-4bc3-4df7-8a09-765794883524
Change several macro names to fit name EDK2 naming conventions: Use all capital letters for #define.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18199 6f19259b-4bc3-4df7-8a09-765794883524
Fix an error which leads the building process crashes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18066 6f19259b-4bc3-4df7-8a09-765794883524
GatewayIpAddress and SubnetMask do not exist in old IPv4_DEVICE_PATH,
IPAddressOrigin, PrefixLength and GatewayIPAddress do not exist in old
IPv6_DEVICE_PATH. This will lead new IScsiDxe to error without updating
IPv4_DEVICE_PATH and IPv6_DEVICE_PATH in system.
Following UEFI2.5 spec of IPv4_DEVICE_PATH do a check before accessing
fields only defined in new version's IPv4_DEVICE_PATH, and revise the same
issue for IPv6_DEVICE_PATH in Iscsi driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
[lersek@redhat.com: rewrapped commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18056 6f19259b-4bc3-4df7-8a09-765794883524
Jiaxin Wu
fanwang2
Liming Gao
Song, BinX
Hao Wu
Fu Siyuan
Zhang, Lubo
hegdenag
Laszlo Ersek
Gary Lin
Ye Ting
Star Zeng
Zhang, Lubo
Jordan Justen