__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
SecurityPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4335
CcMeasurement protocol is installed when it is supported in a td-guest. If
the installation of the protocol failed, the guest shall go into
CpuDeadLoop. Because the measurement feature is crucial to a td-guest and
it shall stop running immediately at this situation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to TCG PC Client PFP spec 0021 Section 2.4.4.2 EFI boot variable
should be measured and extended to PCR[1], not PCR[5]. This patch is
proposed to fix this error.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4194
The TdTcg2Dxe lives in the OvmfPkg instead of the SecurityPkg. Having
the TdTcg2Dxe at the same place as Tcg2Dxe will be easier for platforms to
consume.
Definition of PcdCcEventlogAcpiTableLaml and PcdCcEventlogAcpiTableLasa
are also moved from OvmfPkg.dec to SecurityPkg.dec.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Arti Gupta <ARGU@microsoft.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3515
In V4: Fixed patch format and uncrustify cleanup
In V3: Cleaned up comments, debug prints and updated patch to use the
new debug ENUM definitions.
- Replaced EFI_D_INFO with DEBUG_INFO.
- Replaced EFI_D_VERBOSE with DEBUG_VERBOSE.
In V2: Add case to RegisterHashInterfaceLib logic
RegisterHashInterfaceLib needs to correctly handle registering the HashLib
instance supported algorithm bitmap when PcdTpm2HashMask is set to zero.
The current implementation of SyncPcrAllocationsAndPcrMask() triggers
PCR bank reallocation only based on the intersection between
TpmActivePcrBanks and PcdTpm2HashMask.
When the software HashLibBaseCryptoRouter solution is used, no PCR bank
reallocation is occurring based on the supported hashing algorithms
registered by the HashLib instances.
Need to have an additional check for the intersection between the
TpmActivePcrBanks and the PcdTcg2HashAlgorithmBitmap populated by the
HashLib instances present on the platform's BIOS.
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2858
In V2: Fixed patch format and uncrustify cleanup
In V1: Add debug functionality to examine TPM extend operations
performed by BIOS and inspect the PCR 00 value prior to
any BIOS measurements.
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the SecurityPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Import Tcg2PlatformPei from edk2-platforms without any modifications.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Import Tcg2PlatformDxe from edk2-platforms without any modifications.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3605
The error message is missing the argument for the status code
print specifier.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3277
Initializes the Status variable in TcgMmReadyToLock().
Fixes a Clang build failure:
Tcg2Smm.c - SecurityPkg\Tcg\Tcg2Smm\Tcg2Smm.c:254:7: error:
variable 'Status' is used uninitialized whenever 'if'
condition is false [-Werror,-Wsometimes-uninitialized]
Initializing this variable is required to address a practical
scenario in which the return value of TcgMmReadyToLock() is
undefined based on conditional evaluation in the function.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Kun Qin <kun.q@outlook.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This changes added usage of MmUnblockMemoryLib to explicitly request
allocated NVS region to be accessible from MM environment. It will bring
in compatibility with architectures that supports full memory blockage
inside MM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB31026F3F8C3FAA39D74CE4BAF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3169
This change added Standalone MM instance of Tcg2. The notify function for
Standalone MM instance is left empty.
A dependency DXE driver with a Depex of gEfiMmCommunication2ProtocolGuid
was created to indicate the readiness of Standalone MM Tcg2 driver.
Lastly, the support of CI build for Tcg2 Standalone MM module is added.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB3102C3F99CBADFCC5F8A821CF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3169
This change separated the original Tcg2Smm module into 2 drivers: the
SMM driver that registers callback for physical presence and memory
clear; the Tcg2Acpi driver that patches and publishes ACPI table for
runtime use.
Tcg2Smm introduced an SMI root handler to allow Tcg2Acpi to communicate
the NVS region used by Tpm.asl and exchange the registered SwSmiValue.
Lastly, Tcg2Smm driver will publish gTcg2MmSwSmiRegisteredGuid at the end
of entrypoint to ensure Tcg2Acpi to load after Tcg2Smm is ready to
communicate.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB310295CC623EF7C062844DFFF3969@MWHPR06MB3102.namprd06.prod.outlook.com>
This change replaced gSmst with gMmst to support broader compatibility
under MM environment for Tcg2Smm driver.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Message-Id: <MWHPR06MB310218F28C7AAF8DB375E963F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2793
In current implementation TPM2_ChangeEPS command is always available
in the TPM2 operation pull down list in TCG2 Configuration, which
is confusing when the command is not supported by specific TPM chip.
As a user experience improvement, TPM2_ChangeEPS command should be
removed from the list when it is not supported.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Qi Zhang <qi1.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
When we allocate pool to save rebased the PEIMs, the address will change
randomly, therefore the hash will change and result PCR0 change as well.
To avoid this, we save the raw PEIMs and use it to calculate hash.
The TcgPei calculate the hash and it use the Migrated FV Info.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Qi Zhang <qi1.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
When we allocate pool to save rebased the PEIMs, the address will change
randomly, therefore the hash will change and result PCR0 change as well.
To avoid this, we save the raw PEIMs and use it to calculate hash.
The Tcg2Pei calculate the hash and it use the Migrated FV Info.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Qi Zhang <qi1.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
And do some code clean with updated function
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2841
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Qi Zhang <qi1.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2416
Replaces the hardcoded value of 0xB2 with a PCD for the SMI port access
operation region. This allows platforms to customize the IO port value if
necessary.
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Fix various typos in documentation, comments and debug strings.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-66-philmd@redhat.com>
[lersek@redhat.com: replace EFI_D_xxx w/ DEBUG_xxx to shut up PatchCheck]
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
Use EV_EFI_PLATFORM_FIRMWARE_BLOB2 if the TCG PFP revision is >= 105.
Use FvName as the description for the FV.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
The TCG2 DXE supports to parse the 800-155 event GUID from PEI
and puts to the beginning of the TCG2 event.
The TCG2 DXE also supports a DXE driver produces 800-155 event
and let TCG2 DXE driver record.
The 800-155 is a NO-ACTION event which does not need extend
anything to TPM2. The TCG2 DXE also supports that.
Multiple 800-155 events are supported. All of them will be put
to the beginning of the TCG2 event, just after the SpecId event.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1940
According to TCG PFP specification: the ACPI table must be
measured prior to any modification, and the measurement
must be same cross every boot cycle.
There is a fix 3a63c17ebc
for the HID data. However that is not enough.
The LAML/LASA and PCD configuration change may also cause
similar problem.
We need measure the table before any update.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
We have discussed in this thread.
https://edk2.groups.io/g/devel/topic/32205028
Before the change, TPM FW upgrade will impact TPM2 ACPI PCR value because
TPM2 ACPI HID include FW version.
This change make the measurement before TPM2 HID fixup. So, after TPM FW
upgrade, the ACPI PCR record remains the same.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2265
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update DEBUG() macro to use DEBUG_INFO to address PatchCheck.py error.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
commit a7e2d20193 introduces the code to
get PcdTpm2AcpiTableRev in the driver entry point. This PCD is designed as
DynamicHii or DynamicHiiEx PCD. So, this PCD depends on Variable service.
To make sure PcdTpm2AcpiTableRev value be got, add Variable service as Depex.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: jiewen Yao <jiewen.yao@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are all in Unload() functions, which are probably exercised
infrequently. Fix the UninstallMultipleProtocolInterfaces() calls.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Common definitions are not consumed by VFR. They are not required to be
defined in Tcg2ConfigNvData.h with WA way. New shared internal header
file is added to include those common definitions.
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1801
Add a PCD for skipping password prompt in device unlocked status.
Previous change only support if storage device is in locked status.
This change is added to support the case that security status of the
storage device is unlocked.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
After change behavior to send BlockSid command at EndOfDxe point,
check device ownership command will return un-authority error, it
finally caused opal driver can't show "Enable Feature" menu.
Update the code logic to send detect device ownership command
before send BlockSID command.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
Change Send BlockSID command time from ReadyToBoot to
EndOfDxe.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1753
Add pop-up warning messages before secure erase action.
In order to notify user the secure erase action will take a longer time.
This change also fix some pop-up windows are unable to show up
complete message due to some strings are too long.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Rebecca Cran
Min M Xu
Rodrigo Gonzalez del Cueto
Michael Kubacki
Michael D Kinney
Stefan Berger
Kun Qin
Zhiguang Liu
Qi Zhang
Guomin Jiang
Jiewen Yao
GuoMinJ
Antoine Coeur
Derek Lin
Chu, Maggie
Sean Brogan
Liming Gao
Laszlo Ersek
Chu, Maggie
Joe Richey
Eric Dong
Zhichao Gao