This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is the first part of LsiScsiPassThru(). Before processing the SCSI
Request packet, we have to make sure whether the packet is valid or not.
v2: Make LsiScsiPassThru() return EFI_UNSUPPORTED since this function is
half-implemented
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-10-glin@suse.com>
Map DMA buffer and perpare for the implementation of LsiScsiPassThru().
v2:
- Replace 0x10000 with SIZE_64KB macro for the DMA buffer data array
- Remove DUAL_ADDRESS_CYCLE from PciIo since we don't really need
64-bit DMA address
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-9-glin@suse.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement LsiScsiGetNextTargetLun(), LsiScsiBuildDevicePath(),
LsiScsiGetTargetLun(), and LsiScsiGetNextTarget() to report Targets and
LUNs and build the device path.
This commit also introduces two PCD value: PcdLsiScsiMaxTargetLimit and
PcdLsiScsiMaxLunLimit as the limits for Targets and LUNs.
v3:
- Update the range of LUN in the assertioin
- Squash the spurious newline into the previous commit
v2:
- Zero out (*Target) in LsiScsiGetTargetLun()
- Use CopyMem() instead of the one-byte shortcut to copy target from
ScsiDevicePath->Pun
- Add asserts for PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-7-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Partially implement LsiScsiControllerStart() and LsiScsiControllerStop()
to insert the scaffolding of EXT_SCSI_PASS_THRU functions.
v3: Squash the newline below the declaration of LSI_SCSI_FROM_PASS_THRU
v2: Remove the closing of PciIo protocol from LsiScsiControllerStop().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-6-glin@suse.com>
Implement LsiScsiControllerSupported() to probe the PCI ID and look for
LSI 53C895A.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-5-glin@suse.com>
Implement LsiScsiGetDriverName() and LsiScsiGetDeviceName()
to report the name of the driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-4-glin@suse.com>
Create the driver with only a dummy LsiScsiEntryPoint() for the further
implementation of the driver for LSI 53C895A SCSI controller.
v2: Fix the mixed-case GUID string
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-2-glin@suse.com>
Gary Lin