Do not locate VarCheck protocol in Constructor, then the
gEdkiiVarCheckProtocolGuid could be removed from [Depex].
It will be more flexible for the library Consumer to work without VarCheck
protocol installed, for example at recovery boot mode with EmuRuntimeDxe.
The unused UefiLib is also been removed from [LibraryClasses] in *.inf.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Remove the ASSERT in UI code that may be triggered,
and clean up the useless code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch enhances the UefiBootManagerLib to use more user-friendly
network boot option description.
It builds description like below:
"PXEv6 (MAC:112233445566 VLAN1)"
"HTTPv4 (MAC:112233445566)"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Enhance BDS to support booting from a remote file system exposed
by a HTTP boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds short-form URI boot support to follow
UEFI Spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Enhance BDS to wide match the HTTP boot option without matching
the specific device path data in IP device path and URI device
path node.
It's to follow UEFI Spec 2.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Change BmGetFileBufferByMemmapFv to BmGetFileBufferByFvFilePath.
The original function gets the file buffer only from memory mapped
FV device path and leaves GUIDed FV device path to the code below;
The new function gets the file buffer from both formats of FV device
paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Currently the EFI_FILE_EXPLORE_FORMSET_GUID value in BdsDxe in
IntelFrameworkModulePkg is same with the GUID VALUE in FileExplorerLib.
This patch is to modify the EFI_FILE_EXPLORE_FORMSET_GUID in
FileExplorerLib to avoid potential issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when free up resource allocated for a MenuEntry, there exists
the case that the DevicePath and DisplayString are NULL,
so before calling FreePool function, need to check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This is caused by my last commit,the LoadOption may
not initialize when call FreePool, and after investigation,
find that we can delete the LoadOption variable, this patch
is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19666 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19664 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19662 6f19259b-4bc3-4df7-8a09-765794883524
When overriding compiler options '/GL' with '/GL-', VS2010 will report
warning C4701 potentially uninitialized local variable for 'LcrParity'
and 'LcrStop' in function SerialPortSetAttributes().
This commit fixes this build issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19628 6f19259b-4bc3-4df7-8a09-765794883524
Change EfiBootManagerDeleteLoadOptionVariable() to not just
remove #### from BootOrder but also remove Boot#### variable.
The old behavior tries to do less for performance but it leaves
unreferenced Boot#### which cannot be reclaimed in variable
reclaim operation though the Boot#### will be eventually be overwritten
by EfiBootManagerAddLoadOptionVariable().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19626 6f19259b-4bc3-4df7-8a09-765794883524
Currently the invalid boot next set to the number of boot option,
when add a new boot option,also need update the boot next value,
otherwise it will be incorrect.Now set the type of BootNext value
to UINT32,the number out of the range of UINT16 means it is an
invalid BootNext Value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19591 6f19259b-4bc3-4df7-8a09-765794883524
When do UiApp remodeling task,miss clearing the screen before booting
the selected boot option,so cause some behaviors change.Now add the code
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19441 6f19259b-4bc3-4df7-8a09-765794883524
Currently BootManager is an independent library,used by UiApp.It only load boot
option when enter UiApp.So when add boot option through boot maintenance manager,
it will not display in boot manager. In order to fix this issue,now we update the
boot manager form every time we enter it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19440 6f19259b-4bc3-4df7-8a09-765794883524
When HttpLib parsing the last chunked data down, the Http NextMsg pointer
in the HttpBodyParserCallback function should point to the character
after '/n' flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19310 6f19259b-4bc3-4df7-8a09-765794883524
The caller has initial the input parameter before call this function, So this code is useless.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19302 6f19259b-4bc3-4df7-8a09-765794883524
DeployedMode & AuditMode are UINT8 Global variable according to Enable Secure Boot feature defined in UEFI2.5 Mantis 1263. Add them to var check list.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19131 6f19259b-4bc3-4df7-8a09-765794883524
If the assert happens in a library, then it's hard to determine which module
using that library is generating that assert. Use gEfiCallerBaseName in
DebugAssert to display the module name.
V2: Updated code to use copy mem and ModuleNameSize calculation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19128 6f19259b-4bc3-4df7-8a09-765794883524
BDS puts a special GUID in boot option optional data for
auto-discovered boot option. But when launching that boot
option, the BDS core unconditionally pass the special GUID
to the executable.
A good written application/OS loader can ignore the unexpected
parameters, but BDS core should still avoid passing the
unnecessary GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19007 6f19259b-4bc3-4df7-8a09-765794883524
Add comments in INF file in BootMaintenanceManagerLib.inf.
Refine the comments in INF file in FileExplorerLib.inf
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18975 6f19259b-4bc3-4df7-8a09-765794883524
Align to old BDS behavior (IntelFrameworkModulePkg/BDS) to always create
MemoryTypeInfo variable regardless of the PcdResetOnMemoryTypeInformationChange
value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18926 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot maintenance manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18923 6f19259b-4bc3-4df7-8a09-765794883524
Split the device manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18922 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18921 6f19259b-4bc3-4df7-8a09-765794883524
This library wrapper explorer protocol and produce the file explorer library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18919 6f19259b-4bc3-4df7-8a09-765794883524
This library support select one file from the specified directory or from system root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18917 6f19259b-4bc3-4df7-8a09-765794883524
The "read" word in SerialPortWrite() header comment block should be
"write".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18910 6f19259b-4bc3-4df7-8a09-765794883524
The parameter name is also changed from Coordinate* to Offset* to
reflect that it's the offset to the location specified by Attribute.
For example, when the Attribute is Center, OffsetX and OffsetY are
used to specify the offset to the Center. OffsetX = 100 means
100 pixels right to the Center.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18867 6f19259b-4bc3-4df7-8a09-765794883524
The patch also moves the BmCharToUint to BmMisc.c because it
belongs to misc functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18855 6f19259b-4bc3-4df7-8a09-765794883524
The RestoreLockBox() and RestoreAllLockBoxInPlace() functions handle the
case when EFI_PEI_SMM_COMMUNICATION_PPI.Communicate() returns
EFI_NOT_STARTED: they access the SMRAM directly, for restoring LockBox
data.
This occurs if a PEIM needs to restore LockBox data *before* the SMBASE is
relocated and the SMI handler is installed for all processors.
One such PEIM is UefiCpuPkg/Universal/Acpi/S3Resume2Pei. On the S3 resume
path, in function S3RestoreConfig2(), LockBox data are restored *before*
the SmmRestoreCpu() function of UefiCpuPkg/PiSmmCpuDxeSmm is called via
SmmS3ResumeState->SmmS3ResumeEntryPoint. (The latter SmmRestoreCpu()
function is responsible for the SMBASE relocation.)
If a platform knows that its PEIMs restore LockBox data *only* before
SMBASE relocation -- e.g., due to S3Resume2Pei being the platform's only
SmmLockBoxPeiLib client --, then the platform might not want to include
"UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf" at all (hence
not provide EFI_PEI_SMM_COMMUNICATION_PPI) -- because all of those
restores would be serviced by direct SMRAM access anyway.
Currently the absence of EFI_PEI_SMM_COMMUNICATION_PPI is not supported by
SmmLockBoxPeiLib, but it's not hard to implement. Handle it the same as
when EFI_PEI_SMM_COMMUNICATION_PPI.Communicate() returns EFI_NOT_STARTED:
restore LockBox data directly from SMRAM.
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18823 6f19259b-4bc3-4df7-8a09-765794883524
The library itself doesn't provide any image decoding capabilities but
manages the different image decoders.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18770 6f19259b-4bc3-4df7-8a09-765794883524
Previously the pointer type is EFI_IFR_FORM_SET, it is incorrect when
do pointer addition without conversion.Now change it to UINT8 type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18768 6f19259b-4bc3-4df7-8a09-765794883524
When parsing the authority component of the input URL, it can not distinguish
the ":" is the flag that indicates the port or the separator between
the ipv6 address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Gary Ching-Pang Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18744 6f19259b-4bc3-4df7-8a09-765794883524
Add a DEBUG statement when the number of PEI perf log entries
exceeds PcdMaxPeiPerformanceLogEntries
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18714 6f19259b-4bc3-4df7-8a09-765794883524
This function is mainly through the Hii handle to get the formset opcode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18684 6f19259b-4bc3-4df7-8a09-765794883524
Make the BmFindLoadOption function public
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18662 6f19259b-4bc3-4df7-8a09-765794883524
R18611 only updated the logic to return correct property
when no property set to variable with wildcard name.
But VariablePropertySet needs the pointer of property data for set.
So roll back the change in VariablePropertyGetWithWildcardName at R18611,
and check the property revision first in VariablePropertyGet and
SetVariableCheck before using the property data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18626 6f19259b-4bc3-4df7-8a09-765794883524
to variable with wildcard name.
VarCheckLib has zeroed property for variable with wildcard name
and is waiting for property set. The code should return NULL
when no property set to variable with wildcard name, but not
return the zeroed property that will impact the functionality of
SetVariableCheck.
The issue does not appear with VarCheckUefiLib linked as the library
just has the expected property set.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18611 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
For this case, PcdS3BootScriptTablePrivateDataPtr and PcdS3BootScriptTablePrivateSmmDataPtr are expected to be DynamicDefault,
so use PcdSet64S to instead of PcdSet64 and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18599 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation assumes the performance entry count has no change from
multiple GetPerformanceMeasurement() while loops, it may cause the allocated buffer
for PerfEntriesAsDxeHandle at the first loop to be overflowed if the following loop has
the count changed.
This patch is also to sync the change at
commit R17851 "IntelFrameworkModulePkg GenericBdsLib: Resolve array size mismatch".
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18561 6f19259b-4bc3-4df7-8a09-765794883524
NetLibGetSystemGuid gets the UUID from SMBIOS table to use as the System GUID
(in DHCP and other network use cases). This change adds support to get the
UUID from either SMBIOS 2.x or 3.0, since SMBIOS 3.0 uses a different GUID in
the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18559 6f19259b-4bc3-4df7-8a09-765794883524
The pointer to the destination string changed,the max length also changed.Previous change neglect this point.
And base on the code logic,we can use StrCatS to replace StrCpyS.Now this patch is to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18497 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Remove a hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback".
1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record
AtRuntime flag.
1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot
script data to handle potential INSERT boot script at runtime in SMM.
2. Do not depend on OS to help restore ACPINvs data and use
EfiReservedMemoryType instead of EfiACPIMemoryNVS.
2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script
SMM private data with BackFromS3 = TRUE at runtime. S3 resume
will help restore it to tell the Library the system is back
from S3.
Why to do:
1. The hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback" will cause confusion to
the library's consumer and block the usage of "SMM driver writes
BootScript after SmmReadyToLock". So Remove the assumption.
2. In original code, there might be a corner case that malicious
code patch ACPINvs boot TableLength field same as SMM boot script.
So that it can skip the table restore. The impact is that BootScript
in SMM may be overridden by malicious code.
--------------------
CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS
......
//
// NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length.
//
mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped.
--------------------
So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code
has been updated to not depend on OS to help restore ACPINvs data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
The mBmPerfHeader.Count isn't reset to 0 in BmWriteBootToOsPerformanceData()
so when the actual performance data entry count exceeds the LimitCount,
the performance data collection breaks on condition
if (mBmPerfHeader.Count == LimitCount), but 2nd time calling this function
will not break on condition if (mBmPerfHeader.Count == LimitCount) because
the mBmPerfHeader.Count always bigger than LimitCount, which results buffer
overrun.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18417 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Jiaxin Wu
Dandan Bi
Ghazi Belaam
Cinnamon Shia
Ruiyu Ni
Fu Siyuan
Laszlo Ersek
Hao Wu
Eric Dong
Liming Gao
Daocheng Bu
Zhang Lubo
Jordan Justen
Chao Zhang
Baraneedharan Anbazhagan
Sunny Wang
Samer El-Haj-Mahmoud