To be compliant with the UEFI specification it is required to update SERIAL_IO_MODE with the values set.
This prototype change allows to get the value used inside SerialPortSetAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14365 6f19259b-4bc3-4df7-8a09-765794883524
Remove an unused binary, which was probably introduced by error in
UEFI source tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14267 6f19259b-4bc3-4df7-8a09-765794883524
Formerly only the header was defined and it was expecting the SerialPortExtLib
interface to be implemented by SerialPortLib if supported. This behaviour was
not conform to the EDK2 framework.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14173 6f19259b-4bc3-4df7-8a09-765794883524
Before the tick period used by the Metronome was hardcoded to 100.
This has been changed since but WaitForTick() function was still relying
on this hardcoded value to compute the number of milliseconds to stall
the CPU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14172 6f19259b-4bc3-4df7-8a09-765794883524
This change ensure the MMC card is in Identification Mode.
The card might be in Data Transfer Mode if a pre UEFI Boot Loader
had initialized the card.
A potential optimization would be to skip the Identification Mode
in this case.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13872 6f19259b-4bc3-4df7-8a09-765794883524
EmbeddedPkg/SerialDxe was not allowing to set/get the control of the
Serial connection because the needed functions were not exposed in
SerialPortLib.h.
This commit introduces an additional library to extend the SerialPort
features.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13773 6f19259b-4bc3-4df7-8a09-765794883524
Use the library libdt from the Device Tree Compiler project.
The used version is from Wednesday 22nd August 2012 (commit: 8716901d2215a3)
The Device Tree Compiler project is under dual BSD/GPL license (it means the
license is either BSD or GPL). The BSD license is the license that fits to the
Tianocore contribution requirements.
The use of libfdt into Tianocore has been authorised by David Gibson the
author of libfdt and its current maintainer Jon Loeliger (email thread on 7th
September 2011).
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13760 6f19259b-4bc3-4df7-8a09-765794883524
License.txt is a per-project document showing the license terms
used by that project.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13194 6f19259b-4bc3-4df7-8a09-765794883524
Contributions.txt documents the contribution process for all
tianocore projects. The conents of Contributions.txt should
match in all cases.
License.txt is a per-project document showing the license terms
used by that project.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13187 6f19259b-4bc3-4df7-8a09-765794883524
Move the constant array from its declaration inside the function to a global declaration.
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13140 6f19259b-4bc3-4df7-8a09-765794883524
In the previous version, this command was not working:
cp fs0:\zImage fs1:\
This change uses the source filename is the destination
filename is not specified.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12406 6f19259b-4bc3-4df7-8a09-765794883524
This attribute allows the EFI_MMC_HOST_PROTOCOL interface to manage
multiple instances in one driver.
EmbeddedPkg/MmcDxe: Add Revision attribute to the EFI_MMC_HOST_PROTOCOL
Note: The ARM PL180 and Omap35xx MMC host drivers has been updated.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12255 6f19259b-4bc3-4df7-8a09-765794883524
The MMC driver defaults to assume a card is not present. It then starts a timer in MmcDxeInitialize to check for card presence every 200ms.
However it does not immediately check to see if a card is present so if the EFI driver connection process occurs less than 200ms after the driver load, the connection process for partition
or filesystem drivers will fail because MediaPresent still is FALSE. To resolve this race condition, we need to immediately perform the presence check in the Start routine.
EmbeddedPkg/MmcDxe: Media ID Handling
Initialize the MMC device on Start or when presence changes instead of doing it on the Block IO calls. This way the layered drivers can be stopped and rebuilt with new Media IDs instead of
experiencing errors on calls to Block IO.
Proposed-by: Eugene Cohen (HP)
Reviewed-by: oliviermartin
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12237 6f19259b-4bc3-4df7-8a09-765794883524
In the former version, we were checking the card was in the new state (Standby state).
But the transition to the nez state is only visible in the response of the next command.
This commit removes the check on the MMC state.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12130 6f19259b-4bc3-4df7-8a09-765794883524
In the former version, the check was done for every BlockIo operation.
By using a periodical function, we check less time in consequence performance
are better.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12128 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
This function only create the HOB Handoff Info Table structure in memory.
In opposition to CreateHobList() that creates the structure and starts to
populate it with few HOBs.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11948 6f19259b-4bc3-4df7-8a09-765794883524
This interface allows to use different mechanism to store the HobList Pointer.
EmbeddedPkg/PrePiHobListPointerLib: Implementation of PrePiHobListPointerLib using PCD
This library uses a PCD to store the location of the HobList Pointer.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11947 6f19259b-4bc3-4df7-8a09-765794883524
The PrePiLib should really be used for the PEI phase (not the SEC phase).
It is the DXE core that take the tick for the end of the PEI phase.
The Platform PrePi module should be responsible to take the tick when it
starts for the PEI phase.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11946 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin
jljusten